HOLLEY Terminator X Max Install and setup LS

[@randybryant9936]

Wiring is my nightmare I just don't get it that's why I'm glad guys like you are around

[@escapedan]

I am also running an LQ4 6.0 with a TBSS intake and 4L80e. I was not able to get the engine to run well (or even much at all) with electronic MAP sensor (using the adaptor) but when I unplugged it an used the vacuum line that goes to the Holley ecu it seemed to work much better. Also, I had to increase the pedal to TB percentage on the idle range and lean out the AFR. It’s a learning process for me but at least it’s idling well with those changes.

[@walkdog708]

Great video man! I'm actually doing the exact same thing in my garage with a 6.0 ls with Terminator X on my run stand!

[@slow_restoration]

Nice!! It's easy to do.

[@seanclement2264]

I'm running the terminator x max with the 6l80e controller in my 98 c1500 and I plan on using the tu/td feature with the nnbs column shifter and also use tow mode, so cool all of the stuff you can do with one of these setups.

[@Mason57184]

I'm thinking about running the LQ4 6.0 I'm my 70 monte carlo. That harness makes it look so easy!

[@slow_restoration]

It's a nice system.

[@chrissexton6697]

Seems like a pretty easy system to work with! Motor sounds great!

[@UnsmartCanadian]

You make my fear of wiring so much better. Now to set it up in the ecu to run the fuel pump, fan and transbrake IO's

[@ButcherStyleRacing88]

Man this sounds so good!! Great stuff!!

[@slow_restoration]

Thanks for watching!

[@6SpeedVert]

Great video, thanks! Im getting ready to do the same on my LQ4 swap in my 79 Trans am

[@slow_restoration]

Sweet! They are hard to beat for the price!

[@MacStrengthCo]

That was awesome!

[@drewyt3170]

Hey great work! I have a 2007 truck lq4 24x (i think), I get confused on the Holley website on how to choose which Holley terminator x max to get. I’m doing a tr6060, uscar injectors, and dbw. Every time I try to filter it, I can’t seem to find what I need. Should I get the Holley from Jeggs or somewhere else instead of straight from Holley?

[@kesslerchaidez1962]

How did you connect fuel pump ? Just with the green wire??

[@peterhatch1583]

Why use that intake thks did you have a oxygen sensor plugged in! I have a lq9 thats why asked about the intake manifold my trans is a t400 with gear vender I like the holley kit your using

[@slow_restoration]

This intake adds power everywhere for cheap. yes, this has a oxygen sensor in the header. Thanks

[@peterhatch1583]

@@slow_restoration thks

[@jimlevering4613]

Great video

[@JP-bd2jf]

Sorry but I am wanted to know what did you do for the customer like what is your services

[@ismaellopez674]

Nice job

[@slow_restoration]

Thanks!

[@vegas915]

If I got the terminator x max ls1 24x (550-919) am I restricted ls1 motors or am I able to go any 5.3 4.8 6.0 with the system ? Got it for a steal on market place lol thanks in advance haven’t gotten a clear answer

[@slow_restoration]

It will work with any 24 tooth engine 4.8, 5.3, 5.7, 6.0 the only difference is going to be injector harness. The injector harness is a sub harness and is changeable if you need a different one.

[@BryanSpear]

So the MAT sensor plug is not needed?

[@slow_restoration]

Yes, it is. I added one after this.

[@BryanSpear]

@@slow_restoration I have a 5.3l (LM7) with a stock intake, any idea what MAT sensor I need and where to install it? Thanks.

[@slow_restoration]

Holley makes one or a lot of older GM 's used it also. try a 1998 S10 4 cylinder. You can just drill a hole in your intake tube before the throttle body and pop it in.

[@massivejohnson9795]

How long did you wait for it to come in

[@slow_restoration]

A long time! I think they finally have most kits in stock or close to it now though.

[@massivejohnson9795]

I waited almost 5 months for term x just got it in about ready to dive into it

[@MrMrbaldy81]

What trans did you run?

[@slow_restoration]

A 4l80E went behind this one.

[@sebastianharrison6118]

What about the other 8 injectors what do you do with them

[@slow_restoration]

It's a V8 it only has 8 injectors, not sure what you are asking.

[@sebastianharrison6118]

@@slow_restoration I have a ls6.0 from a 02 3500 and it has 16 Injectors .... I've already got different fuel rails and injectors but it still bothers me

[@brettbennett1740]

What exact headers are those?

[@slow_restoration]

Not sure on the brand, but 5th gen Camaro headers.

[@garyblanker6548]

I am Aria from the AISKITS team and would like to work with you.We produce high quality car headlights, May I send you an email?

[@moniquebenavidez9958]

No