The Sig 716i TREAD .308 Win

[@cornbreadbrown4961]

3 years after making the video.. and it's still helping

[@Blake875]

Stopped in my local shop to fill out NFA paperwork for a suppressor, and I saw this in the display case (the case was otherwise empty except for one other rifle). I’d been reading and watching reviews on this rifle. The store said they got three, and two were snagged instantly, so I grabbed the last one. 😃

[@gatornation3889]

So how has this rifle been since purchasing it ? I am leaning towards this but want to ask someone who owns it. Looking at 400 yards and in for range.

[@JR-ld1et]

Jerk ! Jkjkjk !!!! 🎊 congratulations!!!!

[@liggerstuxin1]

@@gatornation3889 there is an SE edition that has Cerakote. It’s an amazing gun. Surprisingly low recoil and the thing is a freaking cannon. Magpul drum is expensive but for 150 you can slap 50 rounds underneath with said drum from Magpul. So badass

[@msantifort]

Just bought one last week. Shot it at 300yds = 3 to 4 inch 3 shot groups, 600yds 6 to 8 inch 5 shot groups. Great rifle, no malfunctions with all kinds of ammo including steel. Likes the 168 and 175gr bullets. 150gr shoot about 2 MOA, Match 168 and 175 shoot about 1MOA if I do my part. Trigger was very heavy, about 8lbs, have trigger on order so I don't run out of breath trying to squeeze one off. My BARRETT REC10 shoots about the same but is lighter but twice the price. This SIG rifle is definitely worth the price. Paid $1400.00. Great video made me check out the SIG which I eventually bought. Appreciate all the info. Enjoy your Memorial Day weekend.

[@Mike1-]

How has it been holding up ? I just purchased one for 1500

[@chiefro7]

This channel never disappoints!

[@Tadicuslegion78]

Looks neat. Just sucks the market is all screwed up so stuff isn’t getting to stores....or it’s all being bought up the second it enters the store

[@Chilicharger665]

So it isn't getting to stores, yet it is bought the second it gets to stores? Which is it?

[@Tadicuslegion78]

WangChung what I’m saying is stores are either not getting no guns in. Or they are getting very small shipments that get bought out within a day. Same with ammo when they’re only getting smaller shipments and it’s weeks between shipments, again it’s all gone by the end of the day it’s put on the shelf

[@newdefsys]

@@Chilicharger665 pretty sure the OP wrote 'or' and not 'yet'. But let me double check, , , yeap, its an 'or' alright.

[@jhalscott]

I'm so glad to see the Armalite spec receiver extension. That's all I use on my builds since it lets me use full length carbine buffers on my .308/6.5C builds and Vltor A5 on my AR15 builds. One tube for all.

[@raydon14ify]

Having that proper H3 weight in there is good

[@0228mustang]

**Note: The charging handle is not standard AR10. It is Sig proprietary that matches 716G2 charging handle. I bought a early 716 Tread and the only upgrade charging handle available I could find is the Phase 5 716 Battle Latch. Be advised**

[@acyklicflunky12eyeintheski10]

Yes,i lost my money whit RADIAN,and they do not say nothing about that,just after the sell

[@tm1180]

@@acyklicflunky12eyeintheski10 HE PURPOSELY SKIPS OVER EVERY NEGATIVE ON EVERY REVIEW, YOU CAN SEE THE EDIT WHEN HE TAKES OUT THE bcg IT SKIPS OVER THE CHARGING HANDLE PORTION, THEY'RE ALL FULL OF IT, THEY'RE SALESMAN

[@gunsnoptics2172]

Neither is the BCG.

[@MyEpicWins]

Don't buy sig 716i, my first sig and my last, the build is garbage, as stated in this review say the Bolt carrier is nitrided but it not! Is phosphate bcg! Very disappointed, the only thing sig got right is the aesthetic, sig have the cheapest part they can find on the rifle, i should have waited and go with the SA saint victor 308, SA products always been high quality in my experience.

[@show2ime]

@@MyEpicWins mine shoots great. No complaints. What issues have you had?

[@shanematthews9220]

I saw last night on your Q&A you were looking for current 5.56 military ammunition for testing. I recently received a quantity of Lake City 2013 and 2019. Most likely from belts. If you are still in need please let me know. I would be most happy to help with your project. I have followed you since the Small Arms Review days. Thanks so much for your and your lovely wife’s continued efforts.

[@SmallArmsSolutions]

shane matthews please email Heather at [e-mail] , 20 rounds of 2019 would be perfect for the comparative testing. Your contribution would make this whole video possible!

[@michaelpereira808]

I just bought this yesterday. Now this pops up. Fingers crossed.

[@AKlover]

Sig of north America "Quality Control" = Dice Roll ........ and this is A "Built to A Price Point" model. My 320 works thus far, stayed away from their rifles. .308 needs more barrel length.

[@scaldedape6213]

That Sig 308 is a good looking rifle. Nice buy.

[@CoryHobbs2178]

Good find, I have a feeling you're going to love it. I don't know if this is your first AR-10 or not but they really like the 165 grain and up loads. Mine has a 1/10 stainless barrel and it loves the 165 and 168 grain. I need to get a hold of some 175 g to try out

[@thisSiteSucksHard]

Cory Hobbs Definitely not his 1st AR10. I’ll take 2 pls

[@tm1180]

murphy

[@xxthadx]

Watching this rock you back I don’t feel so bad for what it did to my shoulder looking at me stocks currently for it

[@SmallArmsSolutions]

It’s light for the caliber either way a punch.

[@jda79]

I won one of these in a Facebook raffle,.in the mail now should be in in a few days. I'm super excited, been wanting a 308 for sometime

[@freddyw4555]

It’s nice to have a 308 In which the furniture can be changed with magpul that has different colors. Fun to put on fde or od green.

[@irzyxelwj]

I wish I could have gotten the rifle in OD. Not a lot of companies offer it.

[@kyinvestor]

LaRue is in your State and their scope mounts are extremely high quality, you should give them a try. It will make you a happier person.

[@Hoppes99]

looks like he has a geissele tho! i love giessele mounts. havent used a larue yet

[@thisSiteSucksHard]

Logan T Larue on one of my Aimpoints and definitely the best 2nd is American Defense then Midwest Ind

[@newdefsys]

Overpriced

[@CoryHobbs2178]

That rifle looks really good. I'm glad they're using nitride. I would love to pick one up if the market ever stabilizes. On another note, it seems like that barrel might not like that particular ammunition. I have a PSA gen 3 PA10 and I'm able to get 1 inch groups with PPU 165 grain PSP and 168 grain OTM. I'm definitely wanting to try some higher quality ammo to see what it can do. I think with m80 ball I was getting about 1.5 to 2 inch groups maybe... It was windy but something like that

[@Serenityindailylife]

Before someone says it, yes, there is no military spec for an AR10 buffer tube/extension. There is a SR-25 but it was an RFI weapon and no standard was established. These rifles were designed for the Indian Army Mountain units. These units need a 308 because of engagement distances and they operate from a series of concrete towers along their borders, much like a nicer version of the Pakistani Border Patrol towers. So don't conjure up photos in your minds of some 100lb Indian guy carrying these around, even though they do sometimes. It's not what they designed it for. The SD seems to show that it has the right buffer/dwell time and it doesn't seem overgassed as much as most. Good, solid buy.

[@williamwinn948]

bought mine today and love it

[@phillewis1768]

That would look nice sitting next to the Sig M400

[@0megaJB]

I've always assumed the Sig 716 was a gas piston rifle like the 516, you learn something every day.

[@Jordan-nc3zy]

It is. This is not a 716

[@newdefsys]

you are correct. Only the 716I is gas impingement operated.

[@tm1180]

516's g2 fuckin awesome

[@duck-n-cover477]

Great technical overview and opinion

[@85Sirex]

The Sig 716i Tread looks really nice. My LGS has one for sale, and I was considering offloading my Smith & Wesson M&P 10 to get the Sig Tread, then mounting a SIg LPVO on it as well as some flip up sights. Unfortunately I don't have the money to keep or feed both. The M&P 10 is nice, but VERY gassy.

[@scottterry1659]

I picked up a 716i. Nice gun. Not a big fan of the muzzle device, so I replaced it with a device that sends flash, and blast down range

[@GreatWhiteStud]

What muzzle did you buy

[@bezerkoO]

You can not use any charging-handles on this..the raptor will not fit. If you want the ambidextrous charging handle u must buy the sig brand one. Also the trigger is very gritty. I understand it's just milspec, but I went with the geissele ssa-e 2 stage. Beautiful weapon

[@OuterHeavenNET]

This is definitely my next rifle.

[@AllanG1914]

I've got to say this: 1)The charging handle is proprietary so a Radian will not work. I tried. 2) Bought my Tread 716 new at my local range on a Friday, shot 65 rounds of factory on a Saturday, and 17 rounds on a Sunday and then the charging handle gets really hard to operate. Range Officer and I field strip the gun and find the bolt had cracked. Ranges sends it back to Sig for me and two weeks later, it's back. They replaced the bolt. I've yet to pick it up but I may just be selling it.

[@yamahapeanut44]

Can you provide update? Thanks

[@raydon14ify]

Wonder why those k style stocks aren’t more popular. So slick

[@kouvue1081]

Why would they be?

[@raydon14ify]

Kou Vue Minimalistic, and compact. It’s nothing more than it needs to be.

[@kouvue1081]

@@raydon14ify Don't forget, the stock in the video is a sl 'k' version which is smaller than the regular 'sl' version. I would argue that for a 308 AR, the magpul acs works better. It has a better cheek weld, heavier weight to counter the front heavy barrel, the buttpad area is a quarter longer vertically for a better shoulder purchase. Minimalistic and compact isn't necessarily good for a rifle that size.

[@jeffgenchi5863]

I would like to see you talk more on the barrel being a 7.62 NATO and how they address the 308 pressure concern.

[@Derek-1145]

So you can’t shoot 308 ?

[@jeffgenchi5863]

@@Derek-1145 you can according to SIG. I did the case measurements after shooting brass expect about .005 case stretch with this barrel. Sig figures you will never reload and over stretched cases does not matter. However, today I found two boxes of 308 PMC brass was made under spec in head space. This caused lights primer strikes with the PMC. Same time worked fine in my friends 308. The larger headspace may case running issues on some cheaper 308.

[@jeffgenchi5863]

This rifle is a 7.62 NATO barrel not a 308 Winchester. I own it.

[@jeffgenchi5863]

So much like there 556 should not be shot in a 223 barrel. The same rule had been no 308 in a 7.62 NATO. Why is Sigs 7.62 ok to shoot 308? I already figured it out on my own no thanks to SIG. I used my reloading equipment to figure it out.

[@Dan-wf7fb]

It can shoot .308 just fine with no damage from what I've seen to the cases.

[@flyontop]

Always excellent videos! Thank you

[@RedMnM1993]

I love the channel. Great videos always. I picked one of these up. Mine is the 716i with Sierra 3 BDX scope combo. I got it home and started messing around with the scope, and had no idea that it was a smart scope until I looked it up online. Really cool combo and great SHTF gun!

[@RedMnM1993]

Btw, I’d really like to hear your thoughts on the BDX system. I have yet to use it in the field.

[@thomaskingsbury6560]

I know this is an older video and the older reviews indicate the 716 ,the 716 g2, the 716 patrol are piston guns. The later specs on the 716i show D I operating systems. That may well be the confusion for some viewers including me. I have a 716i tread for about 2years. Sigs spec sheet refers to it as di. So are both available or was there a change in the specs from the original and the ones offered now?

[@jhalscott]

I use flat wire buffer springs on anything I build these days. David Tubb's video on this is great.

[@mengher9600]

You can switch out the hand guards on the 716i? I didn’t know that but I do know the m400 from sig is impossible to do unless you utilize the aftermarket sig hand guard that they provide for the m400

[@camsnyder2636]

I'm sure one could you'd just have to use the provided barrel nut with said handguard

[@pauljohnson9445]

LMT FTW.

[@dannywilcoxen]

I got 3/4 moa five shot groups at 100 yds using 168gr federal gold medal match.

[@josh656]

Spuhr gets much respect.

[@SmallArmsSolutions]

Spuhr is a master toolmaker/machinist. Undoubtedly the finest in this entire industry. Expensive but worth every penny

[@ViperMods_216]

Awesome looking rifle

[@Standa]

Hello. Can 716i fired supresed with supressor, subsonic ammo and still cyckling?

[@josemelitonreyna2012]

would you or anyone recommend this or the Springfield Saint Victor?

[@gunsnoptics2172]

BCG and the charging handle is SIG proprietary, the same as they did on Gen 1 716's. Your other AR10 standard BCG and charging handles will not fit. There are two companies that I am aware of that make a specific charging handle that works. Ask Sig if you do not believe it. BTW: They advertise the gun comes with an AMBI charging handle. It is shown in the picture of the gun on their web site and says "ambi controls" above it. It is also mentioned in Sigs own video on youtube. They deleted the video on their website when I brought it up.

[@rajrajendran4979]

Great review. I'm looking at Sig 716i and Springfield Saint Victor in 308. You've a great video on the Saint Victor in 308. In your opinion, which is a better rifle? I like that 716i is ambi while Saint Victor is not. I also hear that the trigger in the Saint Victor is better than the 716i. Appreciate your opinion and thanks for the amazing video

[@SmallArmsSolutions]

Both are excellent. But the 716i is a military service weapon. It’s proven itself. That’s enough to push me over the edge between the two.

[@mariontinsley8646]

This is my opinion so take it as such. Charging handle is the first thing to replace,. Next the flash suppressor - it works OK but looks cheap, and lastly the trigger is horrid for a rifle of this price. Its better than milspec but not much and way to heavy pull for longer rang accuracy.

[@thomaskingsbury6560]

It’s a battle rifle its design is not for accuracy, at the same time it’s an accurate rifle for what it is. If you want accuracy first may I recommend a LaRue tactical that should be everything you are looking for, a close second would be an HK Mr 762 a1.

[@bobcat3905]

Has there been any new options for the ambi charging handle? I tried a Raptor before I learned this was a proprietary part. Thanks for the detailed review i have been happy with my 716 for over a year now.

[@controlledchaos8851]

Great review . In your opinion . Is it possible to get a faxon 8.6 blackout barrel on this fine rifle ?

[@ricklastname9427]

wait...so the 716i has a rifle length buffer system instead of a carbine length? So i could switch out the standard stock with a Magpul or Luther fixed stock without having to replace the buffer tube?

[@masonjackman9703]

I tried a A.R. 10 and Geissele charging handle and it would not work was there something wrong with the charging handle or is it not compatible with that particular bolt carrier it would go out together but you could not call back the bolt carrier group it’s locked

[@FreerideHellDriver]

Thanks a lot for this very informative overview Sir. Greetings from 🇨🇭

[@enahs5000]

I really like my piston 716 (gen 1.) I've been taking a hard look at this one as its half the cost.

[@christopherrussell7344]

Really liked the vid! Thinking about getting the 716i TREAD. Whats the difference between the Tread that has the orange TREAD emblem on the hand guard and the one that doesn't?

[@WalterWhite-gw3vm]

Chris I see you did put an ASR brake or flash hider on it to see how she performs suppressed

[@SmallArmsSolutions]

Walter White no sir, that is the muzzle devise it came with

[@WalterWhite-gw3vm]

LoL I miss spelled there, I ment to say that you didn't put an ASR device

[@treatb09]

Seems like a good rifle.

[@cosbyc2]

With the sig 175gr ammo I was expecting a better group. Also you said it has a h2 buffer in it, most of the carbine stock'd 308 ar's I've seen come with a h3.

[@SmallArmsSolutions]

Chris Cosby properly gassed with gas port size.

[@0228mustang]

I get under 1moa with 168gr bthp produced by Orr Tactical in Needville, Tx. My optic is a Tract Optics Response 4-16x42 BDC.

[@AustinTXRealEstatebyFelix]

Which would be the gun you could compare this best to?

[@Jrh-rp7np]

Does the extractor have an o ring on the spring I just took a new one apart that didn’t have one

[@velvetpilot2008]

The TREAD line of rifles are definitely up there in value and quality. You get Sig quality in a rifle half the price of it's siblings. My only quip is how long it's taking Sig to get me my M400 TREAD. This damn virus business!

[@sicsempertyrannis3669]

Great review. I took a look at one and noticed a notch where the upper receiver and handguard meet. I do not think “any” handguard will fit. I’ve been wrong before, so I may be wrong again. Do you have the ability to try and install an aftermarket charging handle? I do not own one, and have contacted Sig about it. With the rifle being so new, the Sig representative hinted that the charging handle may be proprietary. If you have an aftermarket AR10 charging handle, would you mind sharing that information? Thank you sir!

[@0228mustang]

It is Sig proprietary that matches 716G2 charging handle. I bought a early 716 Tread and the only upgrade charging handle available I could find is the Phase 5 716 Battle Latch.

[@sicsempertyrannis3669]

0228mustang much appreciated. Thank you for your time

[@skillercruz5539]

WARNING!!! Sig Sauer no longer produces the 716i with nitride barrels, or a chrome bolt carrier group. My bolt carrier group isn't even nitrided. Just phosphate. I'm majorly pissed. The firing pin is also different and looks cast. Im pretty angry. Fuck sig.

[@skullcollector5375]

The new battle rifle of the indian infantry 💪💪🇮🇳🇮🇳

[@813Productions]

Is that handguard plug and play with the M400 Tread? I'd much rather have the 716i tread handguard over the stock M400 handguard.

[@SmallArmsSolutions]

No sir, proprietary

[@813Productions]

@@SmallArmsSolutions ah dang. I was hoping since it's a "Tread" version it would be interchangeable. Thank you for the info though!

[@thiagofonseca267]

Brazil say Hello!! Good Job!! 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

[@trentwoodfin8767]

My Employer bought over 200 Sig 716s to issue to officers . They didn’t make it out of the T&E phase and never made it out to issue . Sig sent engineers twice to try and fix the problems (dead triggers , FTF, other problems) Sig ended up buying them all back .

[@ElTejon47901]

Which agency is this?

[@trentwoodfin8767]

ElTejon47901 id rather not say on an open forum

[@ElTejon47901]

@@trentwoodfin8767 So, a secret contract? But it was the SIG716 external piston, yes?

[@trentwoodfin8767]

ElTejon47901 not a secret , I just don’t want to name my employer on a KZbin comment section

[@ElTejon47901]

@@trentwoodfin8767 i understand

[@steviecoleman9260]

Stll cant decide if i should buy 1 todayyyu..

[@2AToday]

It looked like no hearing protection was being worn while shooting

[@thomaskingsbury6560]

It’s in the ear, I’m sure Chris values his hearing as much as the rest of us.

[@tm1180]

what about the tapered muzzle crown, you cannot put just any muzzle brake on it without a special adapter, like APPLE, they want you to buy all of their crap

[@Darktidings960]

Hey I've got one and put a surfire SOCOM on it and it works great surfire provides washers specifically for that taper

[@thomaskingsbury6560]

I’ve got a dead air brake on mine.

[@BillMcGirr]

Looks like a really nice rifle. Good stuff. Enjoyed this video very much.💪👍😊

[@SmallArmsSolutions]

Thanks 👍

[@cptnscoob]

Does anyone know if it takes LR308 barrels?

[@fredjocko]

Tried to purchase the recommended rail covers and the Manta checkout said there is no such coupon code SAS20. Has this expired? Thank you

[@SmallArmsSolutions]

They changed it, BAR20

[@gouthampolagani6576]

Indian army ordered more than 140,000 of these rifles for the Northern Command. that says something.

[@thehighground66_]

Could you please do a video on the colt 700 series. Like the 723 and 733 delta carbines

[@1unkn0wn]

DPMS GEN2 Pattern?

[@ShaneVertner]

any link for the scope used?

[@CalebHawkins2023]

Just picked mine up. Cant wait to shoot it.

[@Scooby2theJew]

I thought this was a direct impingement system not a piston

[@SmallArmsSolutions]

Internal piston

[@jaylee2485]

Is the barrel actually 16” or 14 with a 2” muzzle break ?

[@67_PowerStroke]

Probably the dumbest question ever. Why would they sale a rifle where the muzzle device would have to be pin and welded?

[@frogtaxi2999]

I had a first gen. sig 516 it was not a good rifle (im not trolling) are the newer sig rifles better in quality and fit finish ? i like the idea of this 716.

[@tm1180]

I have 3 516 gen 2 and I couldn't be more satisfied, smooth as silk, I have yet to have 1 malfunction, no bull, I know with sig you can get a lemon and it will never be right, but if you're lucky enough to get one that runs the way it supposed to, they're sweeeet

[@rudrashakti108]

I have the sig 716. So far I am happy with it.

[@Nick-fm9ux]

2_4-14x36

[@hassankirmani007]

Excellent sir

[@markallen1413]

Man this is a great learning experience, I love it👍👍

[@urtedex]

I'm having a hard time removing the stock? How do you take it off?

[@chrisarnold769]

Usually you have to pull the adjustment locking pluger dohickey down manually without using the lever. The lever typically doesn't pull it down far enough to pull the stock off of the buffer tube.

[@Dan-wf7fb]

Read the Magpul Instructions. They supply a black dummy round that assists in removal.

[@robertgroos4293]

I have a sig 716 patrol piston upper , can I swap out the upper with the 716i upper and keep the lower that I have from the 716 patrol

[@SmallArmsSolutions]

Never tried it, anything I would say would be a guess. Probably be cheaper to buy a complete rifle than just the upper

[@calebclark6739]

The shoulder on that barrel looks odd. How’s a flash hider for a can lock up on it ?

[@TerryDanley]

Nice video!

[@parththeviking]

Can I fire 7.62 x 51mm ball ammunition from this weapon?

[@SmallArmsSolutions]

Yes sir

[@parththeviking]

SmallArmsSolutions Thanks!

[@outboardprsnlstndup]

@@SmallArmsSolutions do you know why they went with a rifle length gas system, and does it offer any benefits?

[@tm1180]

is that a serious question?

[@MrRhsmike189]

Is it really 8 pounds or 8.5 pounds?

[@javila1000]

Is your 716i chambered in 7.62x51 or 308? I just purchased one, but on my lower and manual 7.62x51 is on it. TIA

[@tm1180]

???

[@FauziNomad]

7.62 × 51 and .308 are almost the same except brass thickness. So yeah you can use

[@tylervanwormer8302]

@@FauziNomad isn't 308 higher pressure? So can you shoot both in it?

[@metropolitanfirearms5192]

@@tylervanwormer8302 308 is a higher pressure round than 7.62x51, or it is the opposite for 223 and 5.56, the 5.56 being a much higher pressure. But as a guess, it should shoot both 308 and 7.62 fine. I have not seen any Sig gins that can’t run both.

[@rich1958]

How is the trigger?

[@jedknutson8373]

shit...heavy at least 8lbs...

[@rich1958]

@@jedknutson8373 Thanks!

[@thomaskingsbury6560]

It’s a battle rifle trigger we don’t want infantry grunts running around with 1.5 lb triggers.

[@galamonkey]

Do you not wear hearing protection when you shoot? Or are the plugs just so deep that I cannot see them?

[@WitchyWagonReal]

WHAT?

[@SmallArmsSolutions]

I am wearing ear plugs

[@CoryHobbs2178]

If he wasn't wearing ear protection believe me he would be deaf 😆

[@Step_2b]

308 with no ear pro...?

[@SmallArmsSolutions]

I am wearing ear plugs

[@SomeGuy1234X]

What did it run? Also does Sig sell lowers?

[@MMARAVILLA64]

AR-10 buffer tube is the same length as an A5 buffer tube, right?

[@bobmalarkey4621]

I'm not impressed with it. I got that package deal with the bluetooth 4x16x44 scope. The 1:10 barrel sends anything less than 168 grain squirreling all over the place, especially in cold weather. Mine has an issue where the charging handle locks up almost all the time. Another issue where the bolt doesn't go all the way forward (but the lugs lock) and causes the bcg to get jammed up causing the next round to get absolutely destroyed trying to enter the chamber. I've taken it back to where I bought it a couple times and they can't figure it out. I've called Sig, but they won't give me a straight answer, they just want me to send it to them. I've ran it wet, run it dry, disassembled and rebuild it 100 fkn times, but it still won't run correctly. Don't waste your time or money with this thing if your thinking about getting one. It's a heavy malfunctioning proprietary piece of crap that will leave you using it as a baseball bat because that's the thing that I can see it being good for.

[@Dan-wf7fb]

Why didn't you just send it back? It s free..... Do you still have it?

[@thomaskingsbury6560]

I disagree whole heartedly, if you won’t even send it in that makes me think something is amiss.

[@jakehansen3418]

Can you do the ruger mpr?

[@SmallArmsSolutions]

If I could get my hands on one

[@jakehansen3418]

@@SmallArmsSolutions thanks for connecting a year later most wouldn't have love your channel you're doing a good job.

[@shashanktrivedi27]

Pakistanis and Chinese will get taste of this rifle, infact I believe Pakistani must already received lead by now.

[@tm1180]

it's an infomercial, that's why I watch at 2am

[@metallicsilver]

Sig Tread ARs, so easy a caveman can use it!

[@CoryHobbs2178]

Did you just call me caveman? My name is Daryl lmao

[@littlekingtrashmouth9219]

I’ll have the duck with mango salsa

[@calebclark6739]

Pretty attractive price !

[@An2oine]

Do people really care about the play between the lower and upper?

[@jimmymsmizo5741]

👏👏👍👍🤙🤙What is i stand for?

[@skullcollector5375]

India

[@ElTejon47901]

2.5MOA rifle that will run like a sewing machine at that price point!, yes! Throw on a ZIGZAUER optic and suppressor and a Rubbermaid tub of D&H magazinrs and sign me up!

[@victorforte1605]

The way it's hitting your shoulder looks like it kicks like a mule

[@krtacct]

That’s shooting off a bench. Stuff that isn’t that bad standing or kneeling beats the snot out of ya.

[@kouvue1081]

Thats flash hiders for ya.

[@0228mustang]

I have a 716i Tread and experienced the same kick...I have installed a No Kick Buffer, but have not had a chance to try it yet. Will let you know.

[@msantifort]

Don't tell me these groups were at 25yds.

[@SmallArmsSolutions]

Bubba10 100 yards

[@msantifort]

@@SmallArmsSolutions Thanks, you usually shoot at 25. Your videos are full of great knowledge. Thanks for all the info. God Bless.

[@msantifort]

@@SmallArmsSolutions I have a Barrett REC10, wish you would do a video on this great rifle. Best semi 308 I have ever had. Great at distance, light and dependable. I shoot 175 Sierra to 700yds from 1.5 to 2.0 MOA. I think you would love this rifle. When you pick it up you will feel the quality. Thanks for your vids.

[@SmallArmsSolutions]

Bubba10 if I could get my hands on one I would definitely review.

[@vanderwell07ify]

Bubba10 send him your Rec10 for a review lol

[@smokey-qq6hd]

Be ideal if barrel was 18 or 20inch. 16 is silly w 308

[@rudrashakti108]

Why?

[@samuelcarstens6152]

@@rudrashakti108 CHK bbti

[@rudrashakti108]

@@samuelcarstens6152 huh?

[@samuelcarstens6152]

Apologies, bbti doesn't have data for that caliber. Just search 308 velocity vs barrel length. 18 is on the short side. It's why I don't understand why folks seem to like SBRs so much. Autumns armory has a very good video on this subject in 223

[@rudrashakti108]

@@samuelcarstens6152 I have a sig 716 tread and a sig cross, both in 7.62 with 16” barrels. (One is for combat and shtf hunting, the other for hunting). I did extensive research into this very subject. I looked at the ballistics data using muzzle velocities from different barrel lengths in 308, with different grains. How much am I losing? Basically I am losing about 75 yards or more, in terms of energy and velocity, as compared to a standard 308 bolt action rifle typically sold with a 22” barrel. In other words I need to stand 75+ yards closer to an animal than a shooter with a 22” barrel, and the animal will not be able to tell the difference. Now, is that good or bad? A hunter can ethically take an elk at under 900 yards with a 308 out of a 22” barrel. It’s been done. Perhaps even farther. I myself would never attempt that on an actual animal. I intend to keep it to 500 yards max. And frankly probably a lot less. So for sure I have enough dropping power. The differences in the ability to ethically kill an animal with a barrel length going from 22” to 16” won’t be a factor until you reach way farther out, closer to 700+ yards and out, probably. As an example, I had watched a beautiful KZbin video of a family (a father, his father, and his son) in Utah. The father ethically killed an elk over two ridge lines away at 875 yards with a 168gr hand load out of a 22” 308 barrel. With a 16” barrel I would need to be 800 yards away to do the same thing, based on ballistics data. Now, in that specific example, since he had hand-loaded, it could change things if he had loaded it hot, but still, within 500 yards at least, if not 700’ish yards, the 16” will still be fine. Keeping in mind, I have never hunted before, but, people are for sure taking down animals with 16” barrels in 308 all over the place, including elk and Shiras moose, so I’m not too concerned.