toro recycler smart stow carburetor repair. briggs and stratton 7.25 163 cc carb clean

[@fishing4dinner]

Worked perfectly! Started first pull after following your directions. Thank you! This was a free mower & came missing the 7mm and 8mm screws that hole the carb and carb bowl. So for anyone in the future missing those: I used #8-3/4” and #10-3/4” as a direct replacement

[@giovannigraham4467]

Followed your guide to the T, worked the first time I pulled the cord. Thank you for the in-depth guide. 10/10 recommend.

[@smallengineguys]

Your welcome! Thank you!

[@gwen973]

I made the mistake of leaving the gas in the mower over the winter. My weeds are a foot high. Most centers said 2 weeks. The LAST thing I want to do was take that carburetor unit off!! You saved the day & month!!! I was very intimidated. I didn't take the gas tube off or the whole carburetor. 😢 I removed the top lid, two screws to the carburetor, pryed it apart and the little thing with the ball fell out the carburetor. Poured the water out, sprayed it and let it dry for a few and ALL is WELL!!!! Your video is VERY clear and to the point!!!! THANK YOU!!!!!!!

[@AliAllawala]

My Toro Recycle 19 mower would start but die in a few seconds. Armed with a carburetor cleaner I followed your guide to open the mower for the first time in my life and clean the carburetor. 2 hours later, it WORKED!! It’s not a professionally-edited video but it saved me loads of money, time and frustration. Thank you!!!

[@TylerPayne-n2b]

My mower starts but then stalls shortly afterward. I took the carburetor apart per instructions and I didn't see any obvious sign of congestion or dirt, but after spraying it all out with carb cleaner and reassembling, my mower seems to work for now. I'll test it more tomorrow. I'm really looking forward to not hearing the air-starved moaning it's been making. Thank you for the vid.

[@samosavegetarianphiladelph7211]

You have the best and clear tutorial In this tube don’t worry about thumbs down . People can criticize GOD and we are only humans GOD BLESS YOU

[@richardkeller8766]

Best fix it video I've ever watched on KZbin. My only recommendation is to invest $5.00 at Walmart for a small 5-inch tripod so you can use and show both hands. It was only a clogged gas hose, but it was great to be able to disassemble, clean and reassemble a carb!! THANKS!!!

[@CollinCord-oq6iq]

My Toro wouldn't start. Like others I leave gas in my mower over the winter, in 30 years I have never had a problem. New mower, problem. I always leave it full however so no water can get in. It didn't work this year. Your video saved the day. I can't believe the carb just presses on and off. I thought I would have to get at those bolts that are half covered by the carb, but not so. I love your trick with the cover to get off the front catch. Wish I had known that before I messed up the label. My fault for not watching your video first. Your cleaning worked great for my mower, didn't have to use the acid, just carb cleaner. Great video, thankyou.

[@smallengineguys]

Its the gas. Use non ethanol gas

[@CollinCord-oq6iq]

@@smallengineguys Thanks for the tip, non ethanol gas is almost impossible to obtain in my country. Any other suggestions?

[@FreshStart83]

I appreciate your video it was the only one I could find that had the plastic carburater like mine. My lawn mower would only run for 3 to 5 seconds at best. I did what you showed me without using acid. I used a needle and paper clip to poke through in my jets and all ran good. Half way into my grass cutting it happened again. This time I drained the gas tank, sprayed carb cleaner in there towards the ciphening hole, cleaned my jets again, reinstalled , and now it runs like it was brand new. Thank you for making this video. I give you a 10!

[@smallengineguys]

always clean your tank and use fresh gas. a lesson i had to learn the hard way as well.

[@howardlosson2809]

My lawnmower would not start. It had standing gasoline in the bottom of the airbox. Google's best guess, float valve issue. I followed your instructions in this video. Took my carburetor apart. Cleaned it. Put it back together. Lawnmower started on the second pull. Repair cost, ZERO. Thank you very much. A very, very, good video.

[@smallengineguys]

great job glad i could help

[@rogerdavis697]

Many thanks for an excellent video. Finding a video on this particular model of Toro was like trying to find hen's teeth! Good filming and good audio instructions and explinations and thanks to you I actually cleaned out my carburetor and got the Red Barron running again! I agree with the other comments. 10/10 recommended! (Oh, and to my fellow novices, when you are carb cleaning stuff be careful not to have that little metal bar/hinge from the floater get blown away or you may have to improvise with multiple wires until you find the right gague!)

[@smallengineguys]

rut row. cloths hanger might be the same gauge. also any small lawnmower shop may have junk carbs laying around.

[@Amchestnut]

You saved me a couple of hundred bucks and, in the process, I learned something thanks to your great instructions.

[@smallengineguys]

Glad I could help

[@benb3684]

Just helped my father-in-law with this video. She fired right up. Preciate it 👍🏻💪🏻

[@smallengineguys]

Fantastic!

[@deebutler4686]

Thank you. Your video saved my lawn mower. I was able to remove the carburetor and drain the water out. You are amazing.

[@smallengineguys]

Glad it helped

[@tcullen5895]

thanks for the video. I was happy to hear the safety warnings.

[@HelenMark-m5u]

Thanks so much for this! Lots of good advice. Very clear instructions. Learned a lot

[@MrMultiSingularity]

Thank you so much for posting this. Was hard to find a good video for this mower. I just got the corroborator out and poked the holes with a needle as I didn't have acid, and it worked again. Maybe I will get the acid for next time. Thank you again!!

[@smallengineguys]

yeah i used to just poke the jets out just found acid does a better job

[@stevescarbalis555]

I followed your excellent video and my lawn mower started on the first pull - Thank YOU!!!

[@smallengineguys]

Great job!

[@travislynch5316]

I have to thank you so much for this video. Followed it step by step and my lawn mower started on the first pull. I am not super mechanical, yet was able to accomplish this easily. The toughest part for me was collecting the fresh Gas I had put in, but used your water bottle method and worked like a charm. I even had my 7yr old daughter help!!! Thank you again.

[@smallengineguys]

Great to hear!

[@marilyn9501]

I can't thank you enough for this great video! My exact lawnmower had been sitting for over 5 yrs with regular gas & stabilizer. I cleaned the carb 3 times and gas tank as it was full of gunk too. So happy I sent you $10

[@smallengineguys]

wow thank you!

[@inuyasha561]

Loved this! This was awesome I had a neighbor who gave me the lawnmower because they sent it to the shop 3 times so I took it up on myself to fix it and your video Helped so much. Definably get a small tripod for the phone next time your shooting. But otherwise the video was great!

[@metavinci427]

The sticker (bottom) peals back to let you into a slot to screwdriver that snap latch on the hood. It seems to stick back pretty good after.

[@michaelsimmons4712]

This was SOOOOOOOO helpful!!!! Best tutorial I have used. great step by step instructions!

[@smallengineguys]

glad i could help you

[@brandonweigel6309]

Video helped me figure out how to get that damn cover off. Was almost ready to remove the sticker to see if there was a hidden screw. 😂

[@mick3rmick]

This was an excellent step by step video. I have no experience but with help from friends and this video we got the lawnmower running. It saves us a lot of money.

[@smallengineguys]

nice! group effort!

[@chantelwise4595]

I have a rototiller with the same engine that I couldn’t find a manual, or video out there but on a whim I followed your direction as well as emptied the gas tank, and cleaned it and my machine started first pull! Made me feel like I should start a side job 🤷🏼‍♀️🤣 thank you!!

[@smallengineguys]

Glad I could help. YOU SHOULD IT IS REAL NICE FIXING STUFF. ONLY DOWNSIDE IS DEALING WITH CUSTOMERS. THEY SUCK LOL. sorry bout caps it turned on for no apparent reason.

[@michalk8520]

Thanks for this! I actually stopped short of taking the entire carb apart and just drained it plus took the top cap off. Sprayed it all down with carb cleaner let it dry then back together. Started right back up. Thank you!

[@smallengineguys]

Glad it helped!

[@ben_kaiser]

Removed and disassembled carburetor today per your instructions, except just dried everything out as it was already whistle clean. Started up first pull with the lightest effort. Thanks!

[@smallengineguys]

just bad gas. gas is only good for small equipment for maybe 3 weeks.

[@MrSamcroome]

Huge help thankyou, worked perfectly first pull after an hour of buffering about with it beforehand.

[@ehsvideos9006]

Great tutorial. Followed it closely and mower is running great now! I don't think it was water, the carburetor just needed some TLC.

[@dhlh1017]

Great tutorial! I could not have successfully repaired mine without your help. Thanks!

[@smallengineguys]

Glad it helped!

[@sicboy83]

Dudes a legend. Thank you for the video. Saved me some money. Feels good to fix your own stuff too

[@johnpolidan3892]

Thanks. That was a big help.

[@mariuszpawlowski440]

Thanks for help, worked in first pull !!!

[@smallengineguys]

Nice work!

[@CaseyFronk]

I have this mower. It wouldn't start this year. I changed the oil and spark plug. Added a little fuel conditioner to the tank with fresh gas. Followed this guide and it started first pull.

[@smallengineguys]

Great job!

[@tylerthomas7406]

I need a video about the linkages and governor on this specific model. I feel like I have it right but want second hand confirmation if I did them right.

[@smallengineguys]

if it runs and doesnt blow up its perfect lol i dont have one laying around but you can always go to home depot and look at a new one

[@phiko72]

The piece where the choke linkage connects to the carburetor keeps popping off of my carburetor while operating. How do I keep this thing from popping off all the time??

[@jacobldrvlogs2045]

Great guide. Made this very easy

[@smallengineguys]

Glad to hear it!

[@JoeSevy]

Great help! Cleaned main jet with Deep Creep with a straw. Started, first pull.

[@smallengineguys]

Nice work!

[@dccavazos5352]

Thank you so much followed your video step-by-step worked great, this was the first time I worked on a carburetor like this ,started on the first pull . Thanks again.

[@smallengineguys]

Glad it helped

[@frederickwhite6416]

Nicely done. Took me a half hour while watching your video.

[@smallengineguys]

Nice!

[@frederickwhite6416]

@@smallengineguys and I'm a mechanical moron.

[@smallengineguys]

lol not anymore lol

[@alensley1368]

Thanks for the info. Working on one now!

[@alexjr1090]

Followed your video and the lawnmower started up after the first pull. Amazing thank you so much for doing this.

[@smallengineguys]

Glad it helped

[@biologylectures100]

Thank you so much for this video. I followed everything you said and it started up right away. You’re the best!

[@smallengineguys]

nice!

[@ProfessorMS]

Good video and nice breakdown, though the one part you neglected was to take the white piece apart. Inside that middle tube there are about 6-8 holes that tend to get gunked up if you're dealing with bad/old gas or debris. It covers the middle shaft and the one side without the black O-ring on it, easy enough to do and often the source of issues. I suppose the acid does a good job getting in there but a lot of us are using straight carb cleaner and brushes with compressed air. As long as you've got it apart doesn't hurt to clean the inside of it - would hate to take it apart and put it back together without cleaning that out and find you've still got starting/running issues.

[@maargubr]

Just curious the “white part” you are referring to. I followed video instructions and my carb still won’t work. Carb cleaner lets the mower run for 3 seconds. Everything else checks out so that’s why I am inquiring about your comments.

[@ProfessorMS]

@@maargubr The piece he takes out at the 4:35 mark and zooms in on at 5:45. That's actually 2 parts, the pill-shaped base part with a tube in the middle (with the jets/ports you need to clean) and a piece that slides over it. That's the important part to clean, just dropping acid or cleaner into it may not clear out the ports inside, best to take it apart and - as I mentioned - use carb cleaner and some small brushes and compressed air to clear it out. HTH.

[@jerryvincent4727]

Thanks for the video, my mower works so good I went out and got a new air filter and spark plug!

[@smallengineguys]

Nice work!

[@gomanny1302]

@@smallengineguys pppp

[@djhotdogboy]

Really appreciate your video! I have the same mower and will be referring to your video as I remove, clean and replace the carb. Excellent job at going through the steps!

[@smallengineguys]

Right on!

[@trevorwellington4952]

Another successfully repaired mower thanks to this video!

[@smallengineguys]

Glad to help

[@Mojofoe]

Found this video and was able to get my mower running! Thank you soooo much!!!

[@smallengineguys]

Glad I could help!

[@paulzilioli5458]

Thank you for this incredibly helpful video! It was the only video I could find with the same model Toro that I own. Being a complete engine novice, I was able to get my mower running with carb cleaner only, first pull. Thanks again!

[@smallengineguys]

Nice! Now go mow the lawn.

[@bluecollartrader1791]

Thanks for the info. In my case, I think there's some sediment so the process is different than water but some carb cleaner into the main jet, etc should do it.

[@smallengineguys]

same process. clean clean clean

[@eugenemiller7999]

Excellent job sir, where can I get the 14 carrot testing acid?

[@TailFenBaits-pp1rr]

Thank you for this.

[@smallengineguys]

you are welcome!

[@Finnerski]

This video helped me out immensely! Thank you.

[@smallengineguys]

glad I could help! :)

[@YoelBermudez-gv1xi]

Tengo una igual pero no acelera lo suficiente como debe trabajar pero cuando la levanto hacia atrás se acelera y trabaja bien q puede ser eso

[@joebogle1231]

This was perfect. Thank you.

[@smallengineguys]

You're so welcome!

[@JustinBates-z3b]

Awesome thanks

[@amm5687]

Awesome video! When I was cleaning out my carb. I found a small tiny white piece with a black nose and I am not sure where it goes

[@smallengineguys]

Send a pic to my shop phone. [phone]

[@kennethwoolever5054]

Was very informative for me. Thank you

[@smallengineguys]

no problem

[@justinrogers1630]

Can you just use some hemostats to clamp the fuel line instead of draining it if you know there’s no water?

[@smallengineguys]

Always clean the tank. 1 grain of sand can clog that jet. Shortcuts make you do the job 2x

[@justinrogers1630]

@@smallengineguys good point.. no sense in doing it twice.. thanks!

[@coleo4194]

I bought this mower brand new last year. It never has ran correctly. Took it to an authorized dealer for warranty they said jets are clogged. So I followed your video. Realised I'm missing that o ring. Would that make my mower not start or die while running? Thank you

[@smallengineguys]

yes

[@coleo4194]

@@smallengineguys thank you. I will buy the o ring and see if that fixes it

[@smallengineguys]

it wont hurt it lol. but yeah it runs lean not enough fuel without it.

[@coleo4194]

@@smallengineguys 110% was the issue. Popped it in. First pull started right up and was much stronger. Thank you again.

[@kevinpicou9095]

Thanks for sharing your experience, so I can keep what little money I have! Started right up! 💥🥳

[@smallengineguys]

Wonderful!

[@davidharper6984]

Thank you so much got to be one this weekend on my mower ,,,,

[@smallengineguys]

Good luck!

[@lloyddalton59]

You rock sir

[@holvin81]

I emptied the old gas. I cleaned out the fuel tank. I disassembled the carburetor and cleaned it out. The oil seems fine, I just topped it off. The spark plug looks in good condition. The air filter looks clean. When I pull the cord it won’t even start. I’m gonna put some of the the specs down below. I’m gonna change the air filter and the spark plug just to see if that can fix the issue. Just curious if you have any suggestions on what else could be wrong. Specs: Toro Lawnmower 22" (56cm) SMARTSTOW® Variable Speed High Wheel Mower (20339) Engine 7.25 ft-lb Gross Torque** Briggs & Stratton® EXi 163cc w/Ready Start® - no need to prime or choke. Just Check & Add feature - no oil change required

[@smallengineguys]

this needs 3 things to run. spark compression and fuel. first thing i do is take off the air filter then squirt carb cleaner in the carb and try to start it. if it starts then shuts off its a carb. if not next i check spark. new plug check spark. has spark then its a compression issue. check compression. check your kill cable. is it pulling the on off lever far enough to start or is it sticking or stretching. does the recoil pull back. if so then its a bad flywheel key. let me know what you figure out. more info would be helpfull.

[@smallengineguys]

also its an auto choke on this carb. is it sticking closed or open? check under airfilter the flap should be closed at first then open when it starts. try proping the choke open with a pen. also change the oil. it is easy. and it is only 3/4 a quart. if you put in a full quart it is overfull and will smoke bad or not start.

[@holvin81]

@@smallengineguys i sprayed some carb cleaner and it started but then it turned off after 5 seconds. I’m thinking the carb is the problem.

[@smallengineguys]

@@holvin81 yes the main jet is still clogged

[@holvin81]

@@smallengineguys I got it to work finally. It was the main jet inside the carburetor. I swapped it out with the one I received from Amazon. It started right up on the first pull.

[@jasonlow8987]

I went through the whole process. Put the carburettor on, attached the fuel line. Then gas started flowing through the carburettor where the orange gasket is and air filter plate is attached and would not stop. Any advice on why that would be happening?

[@smallengineguys]

needle valve is leaking under the float. take apart try again.

[@ronnblaha4755]

Great video. Thanks! When you put the plastic air filter housing unit back on the lawn mower (14:40), did you have to out the rubber hose back onto the nipple on the plastic assembly?

[@smallengineguys]

yes of course. if it came off it goes back on. unless yours is damaged it will run without it it is more of a cali emissions thing

[@ronnblaha4755]

@@smallengineguys Thanks. I wasn't sure if it was on to start with. I assumed it was, but just wanted to make sure.

[@sherirobison7952]

Thank you so much! Great directions!

[@smallengineguys]

You are so welcome!

[@donaldharrison7821]

Thank you

[@smallengineguys]

You're welcome

[@chemiklyenhanced]

Appreciate it, man. Mower works now. 🤟🏼

[@smallengineguys]

Right on!

[@jomudesimedia]

Very intuitive. Thank you! Can you please recommend a different acid that may work? It appears the 14k you’ve linked is unavailable. Many thanks!

[@smallengineguys]

amzn.to/3MTKFwE

[@mikeleija9710]

As soon as you take off the air filter cover, you expose a ?vent? That comes from the fuel tank. I’m having fuel dumping onto the air filter and saturating it. What could cause this? I first thought I was missing something but my ?vent? Opening looks just like this one in the video.

[@smallengineguys]

IT MAY BE DIRTY TRY SPRAYING CLEANER THREW IT. IT SHOULDNT DO THIS. IVE NEVER SEEN IT HAPPEN. o sorry bout caps. this is the second time ive heard of this ill have to get one cut it open and see what makes it tick. ill let you know.

[@myshoesfelloff]

Any luck finding out this leaking issue from the vent... it is happening to me too... leaking gas right onto the air filter and flooding the engine

[@kdilli6426]

I did all of this and put it back together. Ran great while for a few minutes, but then when i started mowing it did it again. Any idea what else it might be?

[@smallengineguys]

did you use brand new bought today fuel? you may need to do again. 1 grain of sand will mess it up

[@kdilli6426]

@@smallengineguys yes new gas after empthing the line. Could it be the sparkplug or the fuel line filter?

[@smallengineguys]

it could be the plug. is the cable for the kill handle moving freely?

[@Nick-pq5sh]

Great video! My gas is leaking out of my filter area now after taking carb off. Any tips or suggestions? Is my float bad?

[@smallengineguys]

maybe but more likely is you didn't push it in all the way. take back off make sure it is in properly. I've only had 1 bad float since this model came out.

[@philiptodd2529]

Did it all step by step. Same issue. Starts then dies immediately took it apart a second time. Still won't stay running

[@smallengineguys]

make sure the oring between motor and carb is installed in carb before you install it

[@sergioarana1309]

Do you know if they same carburetor on the 21" Toro Recylcer (6.75 torque, 163cc, model 21320; 103M020083F1)? Is the carburetor model number on there somewhere? Having issue with gas mixing in with oil. Suspect issue with float/needle. Given the plastic (on needle or seat), are those parts serviceable/ replaceable or would you need a whole new carburetor? Mower is only a year old but brief talk with shops suggest carburetor issue not covered by warranty. Don't see sense in paying $80-125 for service if can swap out part for $33. Thanks for any input!

[@smallengineguys]

If it is a plastic carb with no primer bulb its the same

[@JoeYoung25]

I'm wondering if mine needs either a new carb or just cleaned. I have 2 of these mowers and one starts right up on the first pull every time and then runs fine with good power. The 2nd one is 1 year older (2017) usually takes 2-3 pulls and sometimes more. Once it's running it can't cut grass even if it's dry and I'm only cutting 1/2" of grass. If I try mowing anything more than that it will sounds like I'm mowing 1ft of grass and a lot of times the mower will die and then is really hard to start up again. Is this a carb issue? could the choke on the carb be the problem?

[@smallengineguys]

Clean the carb

[@JoeYoung25]

@@smallengineguys That's my plan for tonight and I hope it's dirty so I feel better about it at least. Do you really think it could make it run so sluggish?

[@smallengineguys]

@@JoeYoung25 yes but could be a valve or plug too

[@JoeYoung25]

@@smallengineguys just cleaned th carb good and it didn't seem to change it at all. I think it has something to do with what xintr the throttle unfortunately this throttle is automatic so how do you troubleshoot that? Do you have a video of anything similar?

[@neilwilliams2947]

What do I use if I don't have 14k acid test? I am working on my carburetor following your steps as we speak. Can I use a couple small drops of muriatic acid?

[@smallengineguys]

Pull a wire out of a wire wheel or wire brush and poke out the holes and rinse well with brake cleaner.

[@chrisruef9221]

Just finished up. Thanks for putting this together. My filter is on order. Should be good to go now. Where did you hear about the acid idea. I like it. I'm going to buy some now to have on hand

[@smallengineguys]

realized it one day when i was testing gold and found a bad bit that was brass.

[@chrisruef9221]

@@smallengineguys mower started with a gentle pull. Good feeling to fix it yourself. Thanks again man

[@smallengineguys]

great job!

[@buddyblack9801]

excellent video! thanks!

[@smallengineguys]

Glad you liked it!

[@robertlarry8196]

I have the same mower. It's been over filled with oil and now it doesn't crank do I follow this procedure or will it be something different?

[@smallengineguys]

so the oil has gotten in the cylinder. drain oil till it is at correct level. then pull spark plug. rinse cylinder with carb cleaner. pull engine over till nothing is coming out of the spark plug hole. rinse spark plug reinstall try again. you will have to clean cylinder and plug many times but eventually it will start. when it starts let run till it stops smoking.

[@jamesdyer7535]

sorry seen link to acid, but any info for ordering the parts would be appreciated

[@smallengineguys]

plug amzn.to/3GjbgQ0 filter amzn.to/3INZqPE let me know what else you need

[@michaelgearhardt9725]

Hey @small engine guys, question on that little tube that runs from the gas tank to the top of the air filter box. On my mower that is leaking out a lot of gas. Is there not supposed to be a plug on it?

[@michaelgearhardt9725]

at the top of the screen at 16:09 in the video

[@smallengineguys]

Its a vent. It shouldn't leak. Ive never had one leak. Try cleaning it out on the tank side maybe. Strange. Ill dig one up and see.

[@michaelgearhardt9725]

@@smallengineguys perhaps it's leaking because I overfilled the tank? I have started researching this problem and people complain that it leaks when you tip it on its side

[@smallengineguys]

yes it will leak on its side. maybe dont fill it so much.

[@The3speedautomatic]

Can I use regular unleaded rather than the E10 that it calls for?

[@smallengineguys]

yes way better using non ethanol

[@neilwilliams2947]

I have the same exact lawn mower with the same model number and mine are 27T. tourque.

[@smallengineguys]

ok

[@BADD1ONE]

"Smart stall". You got that right

[@smallengineguys]

Stow lol. If it is stalling clean carb.

[@lockemup_jr6451]

I have the same mower and every time I start it up, it dies back down. I replaced the spark plug, and it still dies down. would the carburetor be the problem?

[@smallengineguys]

yep

[@lockemup_jr6451]

@@smallengineguys awesome. I followed your guide in the video and it started right up and ran better than before. Thank you so much!!

[@smallengineguys]

nice!

[@terrybrown8695]

Mine started on the first pull after following your steps, Thankyou!!!!!

[@smallengineguys]

nice! great job!

[@jamesdyer7535]

very good video, where do you get the acid you used for the carb? also is a there a link to ordering parts for this engine?

[@smallengineguys]

acid amzn.to/3AO5qVL let me know what else you need

[@ramejaber8803]

Thank you so much for the video :)

[@smallengineguys]

You are so welcome!

[@bepnewt]

Fantastic. Thank you.

[@smallengineguys]

Thank you too!

[@sherirobison7952]

Is14 k gold testing acid really the product you use?

[@smallengineguys]

yes it is

[@jeffreyrhodes665]

Thank you brother

[@smallengineguys]

No problem

[@scottbowling58]

Why no fuel filter?

[@smallengineguys]

Fuel filter is a fine screen built into the tank. So again clean and dry tank.

[@scottbowling58]

@@smallengineguys Thank you. I was tempted to put one in the rubber line. Do you see any problem with doing that?

[@smallengineguys]

no just isn't a lot of room for one

[@scottbowling58]

@@smallengineguys Any way that you could think of that debris could clog the carb unless it went through the screen that's suppose to stop that?

[@smallengineguys]

@@scottbowling58 gas turns into tar. Ethanol turns into gel. Fuel line dry rots and crumbles inside.

[@edwardrossiter9612]

I ordered a replacement jet and it’s the exact same size and will not fit into the carb!

[@smallengineguys]

use old jet just clean and poke with thin wire

[@randelrobbins1408]

Very helpful

[@smallengineguys]

glad i could

[@DaveCarson2112]

If you are here you probably already own one of these lemons. I have the same gas cap issue, however it's not the rubber seal, it's the tank itself. New gas caps and/or seals will not tighten down. I also have the plastic carburetor issues. It's my second cut of the season and this piece of junk has to come off again. The dealer keeps saying "bad gas" but all my other lawn equipment fires right up with the same "bad gas" which I bought two weeks ago. Absolute junk mower, expected more from Toro. Stay away, far away.

[@smallengineguys]

Dave i dont make these. Anyone that watches this video already owns one. Not sure what your trying to accomplish here but you may be on the wrong video for warnings.

[@Tubachatu]

Thank you 🙏🏽

[@smallengineguys]

You are so welcome

[@nathtimcina]

Thanks

[@smallengineguys]

No problem

[@TomPittendreigh]

don't record against the wind