This is a great tutorial. Just as a note, Tabbed card is available now without adding a separate repository, aside from that all of the instructions here are fantastic
@SmartHomeJunkie2 жыл бұрын
Isn't the Tabbed Card great? NOTE: In the video I say that you can only show one card for each tab in the Tabbed card, but that's not entirely true. If you use a grid card, horizontal card, or vertical card within the Tabbed card, you can use multiple cards for each tab! Tell me how you make your dashboards smaller and more efficient. What cards are you using?
@linuxdocc2 жыл бұрын
Do you have an example for that?
@bat33322 жыл бұрын
The hardest part of home assistant is lack of indepth videos on HA dash board. You have taken on that challenge and provided a very uuelf video. keep on making dashboard video once in three months.
@HollyFredD2 жыл бұрын
Among the dozens of hours I spend HomeAssisting, I think only 0,5% is dedicated to dashboards... Thanks for those tips, it may help increasing this ratio 😊
@redradoa5 ай бұрын
Really interesting and useful!. Great job! I understand that you could use these approach on a regular dashboard, for a PC
@peterdigitalit Жыл бұрын
Great tutorial. Trying to build an "mobile friendly version" this helps a lot. Thank you so much.
@SmartHomeJunkie Жыл бұрын
Great that it helps!
@liorance747 ай бұрын
thank you for sharing these cards. really next level of dash board of smart phone
@SmartHomeJunkie7 ай бұрын
So glad you liked the video! Thanks for watching!
@riesmoos2 жыл бұрын
This is great for vertical oriented smartphone screens. These are nice examples of advanced lovelace cards that I didn't know existed. Thanks Ed, great job as usual!
@SmartHomeJunkie2 жыл бұрын
Thank you Ries! It works also great for horizontal oriented tablets. With the layout card, you can place specific cards in specific rows. It's really powerful. I might create a separate video those possibilities as well.
@riesmoos2 жыл бұрын
Powerful indeed. Tabbed cards, subviews, down the rabbit hole I go....🐇
@JanLankhorst2 жыл бұрын
HI, Nice examples of advanced layout options! Thanks for this.
@calgarraway95092 жыл бұрын
Thanks Ed! Great timing. I'm redoing my dashboards and I was struggling to get my multitude of devices onto my mobile dashboards without scrolling.
@stang70man2 жыл бұрын
Thank you for sharing these cards. This gets me started thinking about my next steps for my dashboards. Great job with the video and explaining these cards that until now I didn't know were available!
@petercook43502 жыл бұрын
Thanks Ed. Please may we have a video on Chips Cards?
@SmartHomeJunkie2 жыл бұрын
I'll put it on the list.
@RobvanKoningsbruggen2 жыл бұрын
thx Ed, you gave me some nice ideas for my dashboard, still a lot to do before i get something worth showing
@cle230110 ай бұрын
Hi, I really like all your videos! Congratulations! Is it possible to have a tabbed card in a tabbed card? E.g first row temperature, humity, etc. and second row with a chart per day, week, month, year?
@BallsworthBallsbury2 жыл бұрын
Ed, great video as always! Best wishes to you from Kansas City
@SmartHomeJunkie2 жыл бұрын
Wow, all the way from Kansas City. That's awesome! Thank you!
@DaveMenkehorst2 жыл бұрын
Learned a lot! Thanks. But how do you make the indentation?
@SmartHomeJunkie2 жыл бұрын
Press the tab key.
@realbryanc2 жыл бұрын
Would love to see a video on the Chip card. I've played with it a bit, but havent really seen any good tutorials on all of its functionality and how people incorporate it into their dashboards.
@DoulosXristou07 ай бұрын
Thanks for the video. I tried swipe card, but I suspect that it causes a memory leak on my android tablet that runs my dashboard. It crashes anywhere between one and four times an hour with the error message "The WeView rendering process crashed! Restarting app...". As soon as I take out the swipe card component, it stops crashing. The tab card does work though, so I'm sticking with that.
@suhaybahmed38132 жыл бұрын
I’ve made mine smaller mostly using the browser mod popup card. Will try this out too!
@SmartHomeJunkie2 жыл бұрын
Yeah, that card is also awesome. I will create a video about that one as soon as a have a new tablet.
@admk0192 жыл бұрын
I don't have the view types, as you mentioned at 5:32. I followed the insturctions from the beggining of the video.
@admk0192 жыл бұрын
Note: server restart solved 🙂
@SmartHomeJunkie2 жыл бұрын
@@admk019 refreshing your browser cache could also have been a solution.
@hvddrift2 жыл бұрын
Great Video (again 😀) I would love to see a detailed video on Chip cards. I hardly use them, but they seem powerful. bedankt
@zdenekhrubos2 жыл бұрын
Díky!
@SmartHomeJunkie2 жыл бұрын
Thank you!
@Giffelpojken Жыл бұрын
What was the keyboard command to give all selected lines a indentation?
@SmartHomeJunkie Жыл бұрын
TAB
@Giffelpojken Жыл бұрын
@@SmartHomeJunkie funny how I did not know that :D thanks!
@ernstrietbergen18762 жыл бұрын
Leerzaam, ik kan weer een tijd experimenteren dank je.
@d0ctorbanana4202 жыл бұрын
is it possible to integrate the swipe card into the tabbed card? I would like to swipe between the 2/3 tabs instead of clicking/tapping on them. Also thanks for the video! Super helpful as always! :)
@SmartHomeJunkie2 жыл бұрын
The Tabbed card does not have swipe functionality. But what you want is possible with the store card only I think.
@linuxdocc2 жыл бұрын
Danke!
@SmartHomeJunkie2 жыл бұрын
Thank you for your support!
@boorandras97232 жыл бұрын
Earlier I made my dashboards pretty convenient for us, but now I could slightly transform that with using swipe-cards. Thanks for this idea :)
@TheNikesh852 жыл бұрын
Hi, Could you use Swipe card to swipe between the tabs as well? I've been trying but not able to. Mind sharing me the details if I've done so??
@wietsecornelissen89942 жыл бұрын
Great video! one question on the lay-out card. i followed the exact instructions but it doesnt show any new views in the dashboard (only the standard ones Masonry (default), Sidebar and Panel (1 card)). I can see the resource file and it is also in visible through file editor. Did you come across this issue as well?
@wietsecornelissen89942 жыл бұрын
never mind - found the issue :) i had two different resources for the lay-out card for some reason. removed both and reinstalled via HACS. works now
@fredrikpalsson31692 жыл бұрын
Great video!! One small Q: what is the key command you use to get many row’s to move at the same time in yaml? Thanks!!
@SmartHomeJunkie2 жыл бұрын
It's the TAB key.
@m.romaithi62172 жыл бұрын
0:54 hoe to add two horizontal card on the swipe card? Thanks
@SmartHomeJunkie2 жыл бұрын
Not sure what you mean. The video explains how.
@m.romaithi62172 жыл бұрын
@Smart Home Junkie Thanks for the quick reply Mr. Legend :D At 0:54 (Right DB card #5), you can see that there are two mini temperature graphs beside each other and you swiped left to show two other graphs.
@SmartHomeJunkie2 жыл бұрын
@@m.romaithi6217 Yes, the video explains how to set that up.
@brianadriaanse3058 Жыл бұрын
Dankje Ed!💯
@photelegy2 жыл бұрын
Wow, nice. Thank you very much!
@Spin3l3ss3 ай бұрын
Can you make a card that only shows which lights/devices are on? Or is it even possible? Im starting this weekend to install home assistant
@SmartHomeJunkie3 ай бұрын
See this tutorial: Yaml and Jinja Course Episode 7: Creating your own sensors kzbin.info/www/bejne/sHvKaoysgrCejq8
@eduardobodega58862 жыл бұрын
excellent tutorial. very useful. Thank you
@michaelb.92572 жыл бұрын
How did you get these small place using -graphs into your side? I really love them! By the way, I also love your videos! :)
@SmartHomeJunkie2 жыл бұрын
I'm not sure if I understand you correctly. I used the sensor cards for this.
@michaelb.92572 жыл бұрын
@@SmartHomeJunkie Thank you! I will try them out :)
@Tntdruid2 жыл бұрын
Very cool, i need to redo my dashboard. It's a giant mess 😂
@SmartHomeJunkie2 жыл бұрын
Redoing your dashboard is a neverending story I'm afraid ;)
@christian16032 жыл бұрын
A strange one... I nested different tabbed cards into a swipe card. This works fine on my phone/tablet (android)...but not on my laptop (windows). I can swipe but I can't change the values of the entities ? Bug ?
@SmartHomeJunkie2 жыл бұрын
🤷🏼
@christian16032 жыл бұрын
@@SmartHomeJunkie Found it ! Seems hold_action on a mushroom entity card (not the template-card) gives the problem ?! Changed it to tap_action and now it works on any device.
@SmartHomeJunkie2 жыл бұрын
@@christian1603 That's great to know!
@macroy0079 ай бұрын
Hi! And thanks a lot fore youre tutorial!
@loovanloon38842 жыл бұрын
Why is a tab only able to contain one card? Or am I wrong about that?
@SmartHomeJunkie2 жыл бұрын
See my first comment. You can use more cards if you use the grid, horizontal, or vertical card within the tab.
@JesseProjects2 жыл бұрын
Thanks for the great videos, I've been getting lots of great inspiration from them. If I may ask you to take one small thing into consideration? I like to fall asleep to calm videos like yours, after saving them to watch again in the morning and make notes. However, your "subscribe" bell at the end shocked me awake last night (apparently I wasn't yet asleep enough to care about the one in the middle). Is there any chance you'd consider finding a less jarring sound for that animation? Your whole vibe is VERY calming, and that chime (even during daytime viewing) doesn't (to me) seem to fit in. Thanks again, and have a great day!
@SmartHomeJunkie2 жыл бұрын
Thanks for the feedback! I will look into it. On the other hand, it might be good that people wake up to subscribe 🤪
@famvansloten28812 жыл бұрын
In de tabbet card, kan je daar ook de swipe card gebruiken?
@SmartHomeJunkie2 жыл бұрын
Yes you can.
@famvansloten28812 жыл бұрын
Tabbet card erg nuttig. Enkel krijg de custom:mini-graph-card er niet in. Heb je misschien hier een oplossing voor
@grimelke38542 жыл бұрын
Hi, first great vids for Home Assistant! have a question off topic for Dashboard! Q: is it possible for HA (latest version) on a Raspi 4 starting up from a mm2.ssd to add a second SSD for to use as a NAS???? Thanks in advance for youre answer Ed Groet, Frans
@SmartHomeJunkie2 жыл бұрын
I never tried that. But, I do think (assumption here) a Raspberry Pi might be a bit too weak to be a full-blown NAS.
@19papafrank662 жыл бұрын
great video thanks
@temyraverdana64212 жыл бұрын
Amazing, what else! Thanks
@videolan2 жыл бұрын
Great stuff - really useful and well done. Must check on some of your other videos. - Many thanks.
@SmartHomeJunkie2 жыл бұрын
Thank you!
@biegstal2 жыл бұрын
Ed, thank you for this broader explanation. I’m not a fan of JavaScript because of vulnerabilities. Are there other types of dashboards/cards to avoid Java scripts?