SMT TRAINING 1

[@rohansikarwar2849]

Sir aapne bahut achha Kam Kiya hai

[@gobberrit3474]

@10:20 NEVER teach a bad/dirty/damaged fiducial!! Usually a fiducial that looks dull and dirty like that is rare. So if u teach your contrast/brightness using a bad fid like that, the machine will misread or even fail the good fiducials in the future. This will compromise placement accuracy. In stead of teaching the bad fiducial, go get another pcb and use it to teach a good fiducial. Or you can eject the pcb, take an eraser from a pencil, and rub the eraser on the bad fiducial. This will remove oxidation and make the fiducial shine like it is supposed to so the contrast between the pcb and fiducial is better. Just remember to wipe the eraser debris off the board thoroughly. U don’t want it ending up in your solderpaste . Also, when using machine to teach pcb height, make sure you have the board supports set perfectly.

[@JohnDoe-qj8nm]

Kick it out and run it again sucka

[@RameshKumar-vl8et]

1. Tolerance 2. Threshold 3. Ruler offset 4. Surch area 5. Lighting level 6. Lead number 7. Ruler width Plz sir explain

[@MithuKumar-w2f]

Sir kiss chijj se banate hai

[@rohansikarwar2849]

Sir yadi ye video Hindi Mai hoti to hum aur achhi tarah samaj sakate the yadi aapp kuch kar sakate hai kuch kijiye sir jab aapne 1 video Mai Desi word use Kiya to bahut achha laga lekin aage badane par sare Arman jaise thahar see Gaye hai sir I am worked in production department in vvdn but I want to learn the knowledge of smt . Sir your work is excellent but with language problem

[@joeporsche1767]

Thank you so much for the video.

[@bhushanthakur5469]

Did this machine is used in news paper production

[@ExtrymGamingLTU]

Thank you kind sir. This was very informative

[@dalicavalier9862]

Merci beaucoup pour votre aide.

[@mehmetalicankurtaran3798]

Which machine does it belong to?

[@India-Tamilnadu]

Sir pls upload Fujii NXT Pick and place machine programming videos

[@ssb8star303]

Sir hind me video ko banao

[@iqbaltamboli286]

Sir Dek Machine operating ke bare me bataye

[@iconca]

nice explanation !

[@pradeepsingh-ep6cm]

Sir please make video in hindi

[@ksasi22]

I am sorry, I don't work in the SMT department any more. I don't have access to the machines any more.

[@ranjanpradhan3442]

sir, how I trained on smt opareting machine, any center. I am in pune

[@ranjanpradhan3442]

sir plz tell me

[@ksasi22]

Hello Ranjan, sorry for the delayed reply. I do not know any training centers. I got trained from the guy who installed the machines for us. Good luck.

[@harshadpatel493]

nice explanation

[@shtrughanaprasad3560]

Sit please provide in hindi language 🙏🙏🙏

[@shtrughanaprasad3560]

Sir...

[@laximikantnaik9286]

how can i contact u...need talk to you

[@ksasi22]

Email me [e-mail]

[@seenusamy1350]

Hi Sir I am seenuvasan SMT Fuji Machine in Sarvo Axice Error pls help Details

[@India-Tamilnadu]

Hi that problem solved ?

[@JohnDoe-qj8nm]

Just say ok. Thats what i do lol

[@rameshvarma8742]

Sir ji hindi me explain karo na

[@ashengge]

这是三星吗

[@ksasi22]

这是Manncorp