SMX Cylinder Head Gets New Valve Seats - Part 2

[@tomstrum6259]

Amazing attention to Details & valve Job looks great ....I like to finger plug Check the vacuum generator Max Gauge reading Before pumping the valve Seat.....Also, Stopping Pump & Timing the leak--up vac Hold seems to measure the Seal quality better....

[@puppygadget3189]

Awesome video Steve and ❤🦮Dewey🦮❤. Thank you and have learned a ton from the best Steve Morris .

[@ondrejconka658]

Dude your awesome love the content

[@RealLifeMatters]

Go here for the actual content... @stevemorrisracing

[@jorgeadame3623]

How thick does the seat have to be? so that the cutting blade does a good job, since I installed hundreds in 4-cylinder heads, these are very thin and I can't mark the last angle of the 5 angle blade. Excuse my English, use a translator

[@georgedreisch2662]

Would seem that additional pre-set tool holders would save considerable time, add continuity, if doing the same heads repeatedly.

[@SILVERBULLETSS86]

Is it copper nickel for exhaust and brass bronze for intake? I'm interested in material type.

[@EngineBuilder]

Steve would have to tell you for sure, but yes, our assumption is that he's using beryllium copper intake seats and copper nickel exhaust seats.

[@tomstrum6259]

Measuring the Finished valve Height After the valve Job work Seems kinda Late in the Process....Wouldn't measuring (and Correcting) Each Installed seat ring Height 1st Before Cutting valve Seats be Simpler to Avoid having to Recut any High valve Seats ??

[@beachboardfan9544]

Why the different color valve seats?

[@EngineBuilder]

The intake and exhaust seats are slightly different materials, so they have a different color.

[@beachboardfan9544]

@@EngineBuilder What are the materials and why is one use for the intake and the other for the exh?

[@EngineBuilder]

@@beachboardfan9544 Steve would have to tell you for sure, but our assumption is that he's using beryllium copper intake seats and copper nickel exhaust seats. There's some more explanation here: www.enginebuildermag.com/2012/01/valve-seat-selection-finishing-materials/

[@tomstrum6259]

Great video....One day, someone's gonna make an accurate Upward Tilting depth Gauge.....Nose centered eyeballs Read better !!

[@wps620]

Does Steve know you are pirating his content?