Рет қаралды 56
The JAYCO SN 532 Plummer Block Housing is designed for bearings with an adapter sleeve, suitable for shaft diameters ranging from 20 to 140 mm. Made from cast iron FG 150 (IS 210, 1993, Grade 15), this housing meets the manufacturing standards of IS 14347 - 1996 and ISO 113 - 1994.
Horizontal split type with two oval-shaped mounting holes
Felt seal and grease lubrication
Economic replaceable unit, requiring minimal maintenance
Suitable for general industrial applications with moderate load and speed in relatively less hostile environments
Optional Features (Available on Request):
Four foundation bolt holes at the base
Four cap bolts
Labyrinth seal
End cover for closed-end applications (material: C.S. Gr. 280/520, IS 1030)
Solid base for heavy load applications
Material Options:
Cast steel or Spheroidal Graphite Iron (ductile) for severe load applications, supporting approximately twice the load of grey cast iron housings
Interchangeability:
All housings are supplied as non-located type. For locating type, a suitable Locating Ring-FRB must be ordered separately.