Snap-on 84" Epiq Toolbox Tour

[@Kudapex]

Would you be interested in a longer, more in depth video going almost every tool? With enough likes and replies on this comment I will consider recording that for you guys!

[@jaketheharleytech]

Ye would be great. I have a super dope set up here

[@Anthony-wj6xb]

Absolutely. I'm pretty sure a lot of the tools would be just as useful for Benz, Audi/VW and most EURO'S. ESPECIALLY THE KITS.

[@erikk27a]

As soon as he said "i work on mostly bmw" i realized how he was able to afford this beautiful set up. Keep up the hard work man.

[@Kudapex]

This setup was proudly paid for by BMW N54 engines. Haha.

[@DiamondTribe]

Nah bro all of us mechanics don’t make anything worth what we actually do at the dealerships haha idk how my colleagues afford tools like this with a family I like to think it’s because they been doing it for a while

[@DiamondTribe]

@@Kudapex toolbox is crazy nice bro I work as a tech at range rover would you recommend switching to bmw🤔

[@DiamondTribe]

Or do you work at your own shop type of stuff

[@thegamingpotato6618]

⁠@@DiamondTribedef stick with range rover and jag. Moving from Mercedes in a couple weeks due to the number of techs we currently have (42) and going to jag we have 7 including me and they all make 150+ on average.

[@TheMeneltarma]

I love that you take pride and keep your tools clean. I clean all of my tools regularly and keep everything immaculate, as you do. You are protecting your investment.

[@Kudapex]

For some reason people like the bash clean tools but that’s how I am 🤷🏼‍♂️

[@markm0000]

@@Kudapex bro if I ever see a mechanic that has tools that clean I would never second guess any work they did to my car. I’m the same way with my toolbox. Everything is as clean as can be and oiled. You are appreciated by people you don’t even know. Forget the guys that say otherwise.

[@garth3743]

Total noob question, but how do you clean your tools? I didn't even know that was a thing until these comments. Soap water then some kind of oil? Annual maintenance schedule?

[@TheMeneltarma]

@@garth3743 I use Dawn Platinum 4x dish soap with a soft brush and rag. Dawn does a great job of removing old oil and grime. Just be sure to throughly dry your tools and apply new grease if necessary. I clean my tools once every 6 months or so. It largely depends on how often you use your tools and how dirty they get. I take apart my ratchets every 3-5 years, clean them, and apply new grease. You might need to do this more frequently or less frequently depending how much you use your tools and how clean you want them. It sure is nice starting a new job with perfectly clean tools. :) Hope this helps.

[@garth3743]

@@TheMeneltarma that's awesome, thank you for the thorough explanation of your process. And using dawn makes sense. Honestly, I just didn't know tool cleaning was a thing but have a few that could probably look like new... Thanks Adams!

[@berzerker812]

I’ve watched this video about 20 times now. This is hands down my favorite tool box set up out of everyone on KZbin

[@Kudapex]

Haha I really appreciate that! I’ll be posting an updated tour soon :). Just getting the box moved to a new shop!

[@BearAlien71]

What an absolutely beautiful box. Pretty much the only tool box tour video I sat all the way through just amazing! Love it No regrets!

[@Kudapex]

Thanks! Awesome to see people are enjoying it. I also sometimes have a hard to getting through most of them haha.

[@filipevieira6052]

I’m sure it feels great to look at that thing every day, what a beauty!

[@TorquedTacoma]

I’m a BMW apprentice tech and have the same colour box. Love it. Was a much needed upgrade from my 54” masters series.

[@Kudapex]

Purple is the way!

[@TorquedTacoma]

I just noticed your purple roller seat. Did you have a part number for it. Or was it limited edition.

[@markm0000]

@@TorquedTacomahe said it was rewrapped.

[@hoodrichjerry]

Im a heavy diesel mechanic and thats the cleanest box i’ve ever seen. I have a box less than half this size whilst needing probably 2 of these 🤣

[@Kudapex]

Sounds like you probably have enough tools to weigh more than the box! Haha.

[@drewewing7597]

This is the only toolbox tour I have seen that is up to my ridiculously high standards. Good on you bro. Very similar to mine but mines storm gray and black.

[@Kudapex]

That color combo was my second choice. Definitely looks good.

[@scrambler350]

That's a GORGEOUS toolbox. Having something that nice in a mechanic shop would give me anxiety, leaving it unattended over night and over the weekend would keep me awake at night! I'd probably want to sleep next to it for the first few weeks! 😂

[@Kudapex]

Luckily I’m in a nice clean shop and don’t have much to worry about!

[@moneymademitchh]

Cleanest box set up I’ve seen on KZbin yet 😳

[@Josh-gy2tq]

Your snap on guy must love you! You paid his house off lol

[@Kudapex]

Let’s just say he’s been very grateful with some cool collectible items!

[@tylermorris1729]

I found this video by pure chance, and boy am I glad I did. I'm a 3rd year apprentice BMW tech and the moment I heard you say "mostly BMW" and seeing that ICOM, I was hooked! Could you at all do a video review or a list of all the special and handy tools you own and/or recommend for Beemers. BMW branded and other brands of course, that would be sick and unbelievably helpful for me bro. Either way, keep up the good work. Keen to reach your level one day.

[@Kudapex]

I’ll definitely do that! You chose a good brand to work on.

[@mikemountin8984]

We all watch this man flex for 17mins

[@mikebolt9753]

Thats one of the coolest set ups I have seen. Awesome box!

[@Kudapex]

Thanks!

[@Memphis_Whistle]

Awesome video, man! Its cool to see how other techs have their stuff laid out. Ive got the same box as you in white with teal trim and a slide split top roll cart, both are full. Just ordered a locker for my 84, so hopefully i can clear up some space. You can definitely take up room working on trash trucks like i do lol.

[@RVMD95]

I’ve been a mechanic for over 40yrs. I’m also a Snap-On fan boy! I bet you get the haters telling you that you got ripped off by buying Snap-On? These are the same guys that get into a 100K+ pick-up truck at the end of the day. My tool box starts with a Mac 1700/w side box that I bought new in 1987. Then I needed more room. I would have loved to move up to a beautiful Snap-On box like yours. I had to make a choice? Do I want a super nice box that would live its life 1/4 full or an overseas box that is 85% full. I ended up getting a eXtreem tools box. I got the biggest set they had. 72in top and bottom. I need a stool to get to the highest drawers. Your tools and box are amazing. Just don’t put yourself in to much dept. To say I’m jealous is an understatement! What is the depth measurement on that box? One draw you pulled out looked to be deeper than it is wide?

[@Kudapex]

It’s 30inches deep. Thankfully all my tools are paid for. Just have to pay off the box.

[@markkinney5030]

You have a really cool box there its set really looks great! I'm a small engine tech i have the snap on masters 72'' box and i love it that is great as well. Thanks man!

[@andygilbert1877]

Very nice set up! 👌🏻 They only did red when I started but I’d go for this if I had my time again. (Retired now) That 84” with locker & hutch seems like the ideal combination to me.

[@Kudapex]

Definitely doing the trick! Thank you

[@losdc5185]

Setup up is clean! Just upgraded my Milwaukee box to the Snap on epiq 68 candy apple with black trim with power drawer and speeddrawer! It’s a game changer! Also got the hutch and led bedliner power top on Order for it too! Can’t wait!

[@Kudapex]

Naice! The workcenter definitely is a nice add on.

[@Tcorellis-j6d]

@@KudapexI’d love to get a works center for my 68 but I’m still paying on my box so hopefully in a few short years

[@DEmechanic2000]

Dude I love the box ! Can’t wait to upgrade mine to one of those one day

[@Kudapex]

Thank you! You’ll love it.

[@Ben_Pede]

Love it! I have the exact same 84" but in Orange with the stainless top. Hutch and locker are next

[@Kudapex]

Good choice!

[@JAI45624]

THIS IS A TOP QUALITY BOX AND TOOLS, NICE JOB.

[@cblack1863]

Those water pump style adjustable pliers are from IPS, a Japenese company. They make a few soft grip pliers like that. Another handy set is thier combination pliers. They also make some really nice extra long adjustable needles, straight & 45°. Very high quality, yet extremely affordable brand. Check out Fujiya & Tsunoda for quality Japenese pliers as well. Nice, clean set-up man, thanks for the tour!

[@Kudapex]

Thanks for the recommendation!

[@mikepappas6415]

Killer set up. I appreciate all the Snap On!!!

[@fireerik]

Fellow foreign tech here, beautiful box

[@brandonwelshsr.8696]

That box is sweet !!!

[@megadhanuja]

Hey man, just wondering what the part number was on that spread socket for the strut mount?

[@Kudapex]

It’s a Hazet 49121. There is also the 49123. Looks like I have the Audi/VW one by accident but it works on BMWs too.

[@MarioMyers-q7i]

Hey nice color can write down we're did you get that snap on mini computer ,from and programs from?

[@kdtxtooldad]

Great tour brother! Awesome setup you have keep it up 💯

[@Kudapex]

Thanks I appreciate it!

[@andrewr6861]

Who makes the fuel pump lock ring tools? The pliers are IPS soft-touch water pump wh-250s.

[@Kudapex]

I’ll have to double check. They actually came with an aftermarket performance pump I had to install on a customers car.

[@MicksMechanics]

Awesome setup mate That’s my dream box in the exact colour I’d choose Unfortunately being a mobile mechanic with only a very small garage at home that thing would take up too much room And most of my tools are in my truck box

[@Kudapex]

Tell me about it! I had it in my home garage when I was switching shops and it’s way too big.

[@ccooper04]

2 weeks ago I got my epiq 84 in as well and love it. Need to go thru and organize a little better, kinda just offloaded my work truck into the box and got to work so haven’t had much time to go in and organize it the best.

[@Kudapex]

It’s waaay too much work

[@ccooper04]

@@Kudapex I know what you mean. I’m just going to take it day by day and organize as I go. Already have the 3 top drawers organized just need to get a few rails to get the odd sockets together. Wrenches I’ve got tool box widget for them and it’s cleaned up.

[@Ares_Ibarra]

WOW beautiful. 👏🏼👏🏼👏🏼

[@ryanyoungs2622]

Looks fantastic

[@T6Tarek]

Those pliers with the white grip are IPS pliers. They are a Japanese tool company they make some great pliers. Tsundoa is another great Japanese plier company. Cost effective and just as good as snappy

[@Kudapex]

Awesome to know! Mine are getting a little beat up so maybe I’ll get some more. And they’re on Amazon!

[@markm0000]

IPS is sweet I have the big and small plastic pliers. So good.

[@760DaCHOSN1]

Sick box! This purple looks awesome, debating on a red one. What worktop is that? Looks like that bed liner one but it’s smooth. Did you get it like that or did you add something to smooth it out?

[@MrTBoner911]

Very nice setup. Thanks for sharing.

[@Michael66633]

VERY nice box.

[@natelax45]

Wow this is great, what do you use to clean your tools and the box ??

[@Kudapex]

Wypall Cleaning Wipes for the tools and Adam’s CS3 to clean the box

[@rubicon3929]

Nice box, I have one like your, the only different is mine is black and all the long drawer is one big long one , 2 bank not 3 bank like your. Mine top drawer has socket rack, I just have too many too tools, so it's packed full with no cases inside.

[@Tcorellis-j6d]

Nice love the color love the set up my only question and it’s personal but I’m asking with good intentions … What the hutch run you on top of the box I bought my 68” epiq for 9k and the thing holding me back is the extra several thousand to buy the hutch. Paying 50 a week for my box was too low so I upped it to 100/wk but by doing so can’t afford the hutch/work center because it’s so much debt via snap on as I was told by my rep

[@Kudapex]

I actually purchased the entire box together when the Rock n Roll truck came by. They tend to offer the best deals. I got a discount on the box and locker, and they threw the workcenter in for free. I borrowed from the bank to avoid Snap-ons crazy interest rates. Might be something worth looking into. I used Snap on credit to get the deal and rebates, then paid it off immediately with money from the bank. Owing the bank is much more flexible.

[@rayellis7262]

Love the tour and layout. My new side cabinate has just arrived but no gas strut😢, is there a part number on your strut?

[@Kudapex]

I’ll try to see if I can find a part number. Is yours an Epiq? It should have come with it.

[@emperor_fisher5263]

Absolutely gorgeous

[@Kudapex]

Thank you! 😊

[@danmorris7894]

@Kudapex, Do you happen to have a part number or anything for that wireless charging flashlight? I'm interested in maybe getting one.

[@Kudapex]

ECFLPRA350 :)

[@Dirtmodmaniac]

I have a wicked snap on addiction but I just can’t see pulling the trigger on the condo box from them . I agree with him on the cordless ratchets just buy the long neck ones . I have 3 of each cordless tool they make and I rarely touch the short 3/8 .

[@squigglymunchkinmechanic]

Aww man just beautiful mine will soon look like that setup 😍

[@szozda44]

What are those red magnets you used in the locker for the cans?

[@Kudapex]

It’s one of these but I cut the 4 section apart and put them in the bottom of the can holders: shop.snapon.com/product/Flexible-Magnetic-Tool-Storage-Accessories/Flexible-Magnetic-Mat-(Red)/FLEXMAT

[@iancoghlan6053]

This collection and tool boxes is worth most people's morgates lol, one hell of a setup for sure

[@Kudapex]

If I had a mortgage, I’d never be able to afford this setup that’s for sure.

[@randywatson1296]

Damn. Deep pockets congrats bro. Keep up the good work. Over $200k for all of that

[@dillz0001]

That Snap-On hat come free as a promo with the box?🤣 Very nice box.

[@Kudapex]

My coworker got it with his scanner but didn’t want it haha!

[@ohiopipper3956]

That snap on brake caliper tool looks interesting. I have the mac ratchet one.

[@Kudapex]

It’s been great so far!

[@JCamacho404]

What’s the model/part number for the 1/4“ ratchet with bit holder ?

[@Kudapex]

I believe the one you’re talking about is the TXM72

[@JCamacho404]

@@Kudapex Thanks for replying. Yup. That's the one. BTW we need more videos.

[@LilasTools]

It's a beauty!!!!

[@PedroHernandez-iz8ef]

I’m thinking of getting a purple box but with green trim..🤔 did you think of any other color trim with the purple?

[@Kudapex]

I was torn on black or titanium but I’m happy with my choice!

[@bananabreds]

bro gets a sub for sharing like all of my hobbies

[@Kudapex]

Haha thank you very much! Working on trying to get some new content out.

[@Toyotatech86]

What’s the part number to that flip 8-10 socket??? Need it!

[@Kudapex]

S6810 😊

[@Toyotatech86]

@@Kudapex 💯💯💯

[@jasonvredenburg4839]

Really kick ass set up... Nice

[@Carpy87]

Hello you say you come From a classic 78 was it just a cab or stack ? to this and you still have loads of space even coming from me haha. My 78 stack is full and want to go to just a roll cab but concerned wouldn’t be big enough and don’t want to go hutch and locker etc Thanks

[@Kudapex]

It was just a box, no stack. My 78 was literally overflowing onto the top. The Epiq box alone holds waaaay more. I don’t expect to fill it any time soon.

[@Vector1621]

Exact setup I want Happy for you man enjoy it How much for the box minus the tools??

[@Kudapex]

Thank you! Around $25,000 CAD or approx $19,000 USD. Roughly 50% off the retail price.

[@Vector1621]

@@Kudapex how did you get it so discounted? Any unseen damages? Lol I feel like that’s the only way our snap on guy will discount anything lol

[@Vector1621]

And all 3 pieces for 19?!

[@Flatfourmotorworks]

Out of curiosity, how is the monitor mounted to the hutch. And if you are using the snap on mount, is the monitor center in the hutch?

[@Kudapex]

Yup I used the snap on mount. It’s very solid. And yes you’ll be able to get it centered.

[@Flatfourmotorworks]

Interesting, I wasn’t able to get my monitor centered.

[@malicemike6875]

id love one of these, so when my moms bf uses my tools he can just leave the entire tool box in the rain instead of a few tools :D

[@winotiger123]

Let me know when you start using your tools.

[@Kudapex]

Every day!

[@eliluna9000]

Is that monitor all in one? If not what do you use to get windows on it?

[@Kudapex]

I have a pc in the locker

[@IamFrinzy]

Im about to start wrenching soon, and this would box would be a dream to have. How many years have you been a mechanic?

[@Kudapex]

It’s taken me about 10 years to acquire what I currently have.

[@coreyv3071]

Angle wrenches are amazing! Don't know how I got by without for so long.

[@Kudapex]

Super helpful in tight spots or on oil cooler lines!

[@A1ViViD]

That socket drawer is heaven lol, noticed some missing ones but fucking amazing

[@Kudapex]

Its changed a bit over the last few months. Maybe I’ll do an updated tour at some point.

[@shanebloomfield5356]

Awesome set up 👌🏻 all red tools always! What do you think of the air hammer? Keep thinking about picking one up!

[@Kudapex]

Definitely go red since it’s what they usually have in stock lol. The air hammer hasn’t let me down yet. Always glad I got it. I believe it’s the second most powerful on the market just under the Astro. But the Astro is really big.

[@chrisdehn5492]

Air hammer is great, lots of power when using hi-flo fittings but also great for finesse work with the variable trigger

[@dustup2249]

It's so pretty. I simply adore boutique man caves! Are you really going to buy jewel encrusted BBQ skewers for that Snap On gas grill you ordered to accessorize your salon--- err--- garage?

[@Kudapex]

I think I’d stick to companies that actually make bbqs lol

[@redmesa2975]

10:15 I have the 5’ long pry bar. I call it Sweaty Betty

[@ozzmann3217]

Very nice setup haven’t seen many people with the snap on foam for so many different sets pretty dope

[@mike_0213]

I would hate to know how much everything cost you, a lot of people can't afford Snap-On so they go for some lesser brands but I would love a set of Snap-On sockets at least. If I wrenched every day for a job I would most likely be in debt with Snap-On. Thanks for sharing, this tool box was freaking great!! I am currently in a 5 draw tool cart right now but looking to upgrade to a full size tool box at some point in my life.

[@Kudapex]

Thank you! It’s taken me about 10 years to build up to this so take your time!

[@cptdavidwebb]

That was impressive.

[@hotrodgreg504]

What brand of socket organizers are you using?

[@Kudapex]

The 3 row organizers are from snap on but I believe they’re made by Olsa Tools

[@hotrodgreg504]

@@Kudapex ok, I just noticed that they didnt skip any sizes and my sunex socket sets dont either. Couldnt find any holders with numbers on them that did the same.

[@tonycroteau9264]

Awesome setup great video 👍

[@Rendonlxi]

On the locker light what you end up doing I just got mine for my locker it’s the same bs. There only one light option for the locker ? Magnet has to be on the switch to be on. lol Beautiful box btw mine is the same except black with gloss black trim

[@Kudapex]

Snap on customer service sent me out the correct one for no charge. Just contact them :)

[@100mphFastball]

Very impressive.

[@Kudapex]

Thank you very much!

[@yandelrosado547]

Purples so dope I want a box but don't know if it's worth it

[@justintapat4159]

Where do you get that drawer organizer that holds your cordless tools ?

[@Kudapex]

It actually comes with the box. It’s the power drawer.

[@Mxsintoni]

What mat do you have on the work surface

[@Kudapex]

Just the Bedliner top

[@Pmemox]

Can you share the link to buy the monitor mount you have?

[@Kudapex]

Here you go! shop.snapon.com/product/Workcenter-Accessories/Monitor-Mounting-Bracket/KATVBRKT

[@jspen1730]

Definitely a snap on fan boy....your snap on dealer mist love you lol

[@Kudapex]

I’m a bit of a sucker for having all the same brand. Almost a part OCD thing. Not a financially good idea in this case lol. But if someone makes something clearly better, I’ll always buy it instead. Snap-on is also the only truck that comes by our shop. (We don’t see many more brands in Canada).

[@jspen1730]

@@Kudapex it's very impressive I'm not going to lie..

[@brandonwelshsr.8696]

We have snap on truck that comes every week and Matco truck that comes 1 every couple months lol

[@nickcove7355]

What do you use to clean the tools and box ?

[@Kudapex]

Tools I use Wypall Cleaning Wipes. The box I really like Adam’s CS3. Both keep everything looking nice and new!

[@crossroadgaragellc]

Awesome setup!

[@Kudapex]

Thanks!

[@sdsubietech1354]

The monitor mount where did you get it again?

[@Kudapex]

Snap-on KATVBRKT

[@victorzarate570]

Can you show what is the part number on the snap on mount please thanks

[@Kudapex]

KATVBRKT

[@soledadmonstabreh]

This would be my dream set up. If I ever do upgrade from my Matco 5s triple bank. 😂

[@almightyracing]

How long did it take u to squire everything? And how did u decide on what to buy

[@Kudapex]

I acquired everything over the course of about 10 years. I’ve always tried to buy when the tool was on sale or promo. Basically just kept buying as I discovered what I needed for certain jobs.

[@almightyracing]

@@Kudapex thanks for getting back with me. I love the purple Epiq setup with all red tools. Combo is sick. Keep up the great work

[@Rawspeedgarage]

That’s a damn nice box

[@Kudapex]

Thank you!

[@camachoiscool]

Where’d you get the mini box from?

[@Kudapex]

My dealer had a few on the truck one day. It’s call a Micro Box. Can find it on the website.

[@xXQUIRKY1992Xx]

Those teslong bore scopes are the best on the market for the money

[@Kudapex]

I’m still surprised how much abuse it’s taken from being twisted etc.

[@xXQUIRKY1992Xx]

@@Kudapex yeah great bit of kit, and the scope it's self is replaceable

[@tylermorris1729]

Which camera head size and cable length would you recommend? I'm looking at getting one very soon. I'm also a BMW tech, if that helps narrow it down.

[@flyeaglesflyyy]

This is what not having a girlfriend, a life, and racked up in tool debt with a good paying job looks like 😂sad thing is, I'd still be totally fine with all of this.

[@Kudapex]

The no girlfriend/wife part is key 😂

[@carltorres513]

I totally agree 😂

[@markm0000]

Big respect.

[@hhattingh]

Once you've spend time with and Epiq everything else just feels horrible and cheap. Noce setup and I've gotten some nice ideas from this tour. Thanks!

[@Kudapex]

My coworker bought my classic. It’s kind of scary how much worse it feels to me now.

[@SAMPLETEXT285]

0:57 is the only box from snap on i can currently comfortably afford at the moment lol

[@Kudapex]

Even that thing is a bit over priced 😂

[@nemanjaopacic7949]

very nice setup 👍👍

[@jaymechanic1228]

Amazing toolbox man!!! Where did u get the 8/10 flip socket???? Suscribed from the uk

[@Kudapex]

Thank you! S6810 is the 8/10. Or 106FLIPSET is the set! Both are Snap-on.

[@lesmoor001]

roughly how much dose that setup cost ?

[@Kudapex]

Entire box with tools?

[@jasev587]

What monitor is that ? And what is it tethered to ?

[@Kudapex]

LG 32QN600. I think I got it around Christmas time for like $250. Pretty good deal for a 32” 1440p monitor.

[@andreidanuts]

What is the part number of blue point stubby bits?

[@Kudapex]

BLPBSS40. I think VIM Tools might be the same kit.