Snap On Friday Step Back In Time With New Old Stock Tools

[@epicragegaming2016]

dude finally paid off his torque wrench and parted ways with it.

[@kennethwright8081]

Nice my dad recently gave me his entire craftsman tool chest’s from the 70’s which is chalked full of old craftsman v and vv tools old snap on sockets and some Mac tools. He has an old craftsman torque wrench of this same style very cool.

[@dillonlohr2355]

I've got a snap on breaker bar from the 40s 50s era still going strong to this day

[@dillonlohr2355]

1947 ns-15

[@jimmccune568]

Bought a Snap On TQFR 250 1/2” Drive Flex Head Torque Wrench 50-250 Ft. Lb click type 40 years ago. Still works perfect.

[@Adams_Grage]

I’ve never clicked so fast wasn’t expecting this today! But on another note what happened to Mac daddy Michael

[@johnnyramirez9082]

I need my fix

[@KoonTrucking]

I’ve been busy and ain’t had time

[@timtimtim5294]

My snap on truck stopped by today as well. I bought a 1/2” split beam torque ranch and some 3/8 shallow impact sockets

[@rayparker7496]

I was thinking the same thing about Mac daddy

[@dgross361]

snappy new year to all !!!!!!!!!

[@philipbohlinger4150]

I just watched a 7 piece snap on screwdriver set ( teal hard handle)sell for $406 on Ebay. Snap on obviously needs to bring these back!

[@andrewscott8892]

I've bought a lot of nos Armstrong in the last year but it's all stuff from within the last 20 years, I love seeing old old nos stuff especially WW2 era

[@andybrooks4070]

I wish snap on went back to the old logo, it was so much better in my opinion, something about old tools makes me happy

[@lovetolearn5253]

The best thing I found in a engine was a nickel. Someone stuck a nickel above a valve to take up the clearance. I actually saved the nickel. It was the first head job I did.

[@tonythieme5067]

Have a good new year’s everyone

[@handbg6257]

Thanks for the memory lane guys ! Happy new year !

[@raymondhorton9655]

You all have happy new year with your friends and family see you all next year

[@mikemuzzell5167]

I really enjoy my load pro. And my test light. FYI solder can be use in a jam a fuse. I’ve seen me use it. Ty mr Sullivan.

[@TheTorkerman]

I still turn the microwave off at the wall today 😂

[@jaethedonttv]

Hey I love your videos brother my grandpa gave me a compression tester kit from back when he was a ford tech and he was in his 20s he’s 70 now and I’m 20 and the box looks just like that design same color I’m guessing it’s about 30-40 years old. And I just seen that paper after commenting this it looks just the same and I just heard you say yeah 30-40 that’s correct man your’e right. He also gave me a pry bar and some other stuff but those are the two snap on things he gave me I love my grandpa it’s crazy cuz I am also a ford tech now it’s really cool to have stuff from him.

[@ronanderson1816]

Thank you for the trip down memory lane !

[@jantrzesiara8095]

Was a big surprise to see Snapon Thursday

[@obsant7214]

Finally Hamilton turned in to joe and no matter wht will make it tht week forsure needs to do this again if he ever knows he’s gonna be off on Friday we love t Hamilton he’s r favorite forsure

[@georgeferlazzo7936]

Hello again Clay Thank you for another Great Video. Happy New Year's to you both and your family's.

[@bmk506]

Word is the guy is still makin payments on the torque wrench 😂

[@randysmith9636]

Love Snap on Friday, especially on Thursday. I'm trying to find the older 3/8 ratchet on a 1/4 inch frame. I love it and apparently someone else loved it as much. I hate a Fricken Theif !!! Lol, talking about old phones. I grew up at Grandparents house and they had a party line. Depending on the number of rings you knew if it was for you or the other two families on the line.

[@firsttimediesels6289]

Snap on Thursday? Doesn't have that same ring to it 🤣🤣

[@HemiCountryBoy]

Happy New Year!

[@loneflwolf721]

Happy new year to all the family here

[@phillipbainbridge9107]

That torque wrench won't take long to sell as long as it's marketed. At one time, the majority of what we used in the Army were CDI beam and dial torque wrenches.

[@jenniferfreeman1752]

Happy new year to ya'll stay safe 2022 is going to be a great year. GOD IS IN CONTROL.

[@drengskap]

So that's what the end of December looks like in Mississippi? Shee-it!

[@davidwalle5025]

I had to use dowel pins at work for fuses because purchasing would not buy any. Hamilton's truck is look a little bare. Have a great new year everyone.

[@lovetolearn5253]

My dad has that big as ignition analyzer at his shop, it works and everything. The freaking thing is huge. The one he has is about the size of clay's box without a locker.

[@KoonTrucking]

Yeah they were big back then

[@rajonchiaro1535]

You guys are the best Have a Great New Years and I can't wait to see more videos

[@WizzRacing]

That damn cheat sheet for the Spit beam. Is worth paying for a week class on ow to use them... I had a customer come in. Said he blowing fuses on his GM... I get the top off the fuse box to see what was going on. Once I got the fuse box apart.. It had a 9mm bullet right through the wiring inside it...I took a picture and gave the bullet to the customer.

[@marcusloftis2779]

I have that in 1/2”.

[@jamienixon2185]

That style of wrench is the only way I know of setting a rear end

[@jefferysmith5280]

Times definitely have changed...party line lol

[@heavymachinery2843]

That valve spring compressor is nice 😍

[@rodhagen9393]

I won't drink and drive but I won't walk either. It's -26f and then the wind puts it at -35f

[@eric63377]

Next he'll have a four gas analyzer on that truck for sale lol. I have a penumatic valve spring Compressor it's way nicer. Great video Happy New Year.

[@treytop5227]

The nerve of some people. Hamilton walking around in short sleeves and short pants. I just came in from plugging the truck block heater in, thought the cord was going to snap off, not snap on! 28 degrees below 0 as I watch this.

[@KoonTrucking]

Cold 🥶

[@jduv6455]

Drinking 🍺 rn. Appreciate the video. Been doing other things, lately. Glad to see y'all. 🍻 #keeponkeepingon - Joe deertay (Joe dirt movie reference)

[@Toolaholic7]

Finally bought a long reach 3/8 14.4 cordless long neck ratchet last week,dealer had them in stock.Will be using it next week for the first time.Even shown my dealer one of these videos too.Last tool purchase in 2021

[@charliegardner8537]

Gentlemen you all have a happy New Year been enjoyable watching

[@brandong1990]

I've got a 1/2" drive dial torque wrench from sk its super old but it's my favorite for cylinder heads because you can watch the torque slowly increase and you don't get that burst of energy at the end from the click

[@jeremykinsman704]

Great video, see ya'll next year.

[@hilltopmachineworks2131]

Man that beam style torque wrench is sweet. I would grab that in a heartbeat if I was on Hamilton's route.

[@mikepierce293]

Happy new year

[@joshmiller8663]

I have that valve spring compressor.

[@joeyesparza5995]

Happy New Year’s day

[@marcoruiz409]

Good stuff guys!

[@andrewkarppinen4348]

I still have an old beam style torque wrench like that. I think its a Craftsman. Nobody knows what those are any more. Went the way of the 8 track player.

[@angelcomeaux5767]

Sorry I'm late very late happy new year to yall

[@chrismartin4334]

That is a CDI torque wrench out of the city of industry in Los Angeles. My dad was the plant manager there for many years and probably personally handled this torque wrench. Really cool

[@bigairtrix2]

I love me some snap-on "Friday" videos.

[@nickvvesci8047]

Flip the metal box over and look on the bottom side, should be the part number for the metal box and a date stamped in it. I'm very curious, im gonna say 78

[@cassiuspuckett8789]

Happy new year Clay. Hope 2022 is much better than 2021 for you and your family......

[@ronaldjohnson1474]

Ah, the memories! Knew what the white box is immediately. Always have a laugh watching kids trying to push the buttons on rotary phones. Better yet, I have a Scandinavian push button phone that use a calculator-type keypad.

[@EATSLEEPFARM]

I love my power probe but you gotta have a test light handy aswell. Just because a circuit shows voltage doesn’t mean it can carry a load. I’ve got a stackable banana jack on my test light. I can plug it into the cord of the power probe that way I can always have clean power and ground.Those two things at your side you can fix and find a lot of electrical issues.

[@KoonTrucking]

If you don’t have a load pro you need one! Those things are the cat’s meow when checking circuits and loads. Well worth the money kzbin.info/www/bejne/fX6ZkGqneKl2oNE

[@EATSLEEPFARM]

@@KoonTrucking I don’t but that’s funny as I’ve been kinda eyeing um here lately. Looks like I need to pick one up👍

[@nickmcgee3258]

Hey clay, next snap on Friday can we see all the hi-viz products Hamilton has ? Love the videos !

[@dougrobinson8575]

Power probe makes the snap on one

[@SPMech1]

Happy New Year Clay to you and your Family ! ! ! !

[@robertzerafa4806]

Fantastic as always Clay, I really enjoyed it as always😀

[@6548ww]

I prefer the needle gauge Torque Wrenches over the Digital ones I do have a 1/2 inch it came from Sears bought back in 1996 still looks and works like New

[@Toyotas_n__Tools]

Anyone still call a couch a davenport? Hahaha

[@BouncingSparksJ]

I want one of those black and grey jackets so bad. 😔

[@mramseyISU]

Have you guys been digging around in my dads shed? Got a flow meter for the bench laying around too?

[@ianthompson2802]

75% of my use with a power probe was me and my coworkers shocking eachother with one

[@paulmendenhall5226]

You can check the date by the serial numbers

[@larryborkstrom3580]

That's a great blast from the past

[@justinsmet]

Worst electrical is doing on mixer trucks because everything is by oskosh and have to follow their plans and figure out what wire goes to what plug ect.

[@livinctry]

First comment it’s gonna be a great episode still!

[@harlemd6101]

Happy New Year fellas! Here’s to 2022, when hopefully all tools will go BLUE!!!

[@workingmanpatriot8760]

Too sets in a metal box, see koken!

[@jaG-zc2yr]

Do you think it's better to but the sockets and wrenches in individual instead of buy the kits and sizes you never use

[@phillewis1768]

Another great episode of tool time with Clay and Jovan. How do I get in on that tool box give away?

[@KoonTrucking]

It’s for his route customers

[@willm6701]

Random question my dealer didn’t have an answer to but why the heck can’t I get a 12pt 5/16 impact socket from Snap On? Got one random chrome socket because they don’t make it in a impact.

[@jeramy2398]

Doesn't it have Snap on's date code on it like ratchets have?

[@sledsports]

It's not a Snap On beam. It's a CDI. CDI before Snap on acquired them.

[@KoonTrucking]

It’s not a snap on

[@sledsports]

CTA what??

[@EdAtoZ]

Koon, Got the Capri 8pc Pro WaveDrive wrench extractor set for Christmas. Today I got time to check them out using my Hex Allen set and I found all open end are fine but one boxed will not fit on the Hex Allen, it was the 9/16". Called Capri and left ny name an number but no callback today.

[@bayareaghost8103]

Just bought a custom 68” epiq and I’m wondering how long it’ll take to arrive ? My snap on dealer doesn’t have an estimate

[@donotrobme9295]

Depends if u start making payments and tips to dealer. Helps

[@anthonydamico5830]

Figure about 2 months.

[@futurecollector]

How much for the Torque Wrench?

[@roadtoad3484]

Can you do a video on scanners for diyers? I would like to spend between 100 and 400 dollars.

[@KoonTrucking]

Launch CRP123 for basic stuff and more expensive Launch for more in depth. Worth the money all day

[@fire8014]

New to your channel. Can you ask if I could buy just a power drawer kit for my KMP1033 in Snap On Red. Just a side note we have a Snap On dealer that shows up when he wants and only on day shift. I work for a 24 hour working shop in Oregon.

[@tyroneallen8064]

I have been wondering about mac truck he tired of u tube

[@KoonTrucking]

Been busy

[@SrgMisterNetMan]

What happened to the Mac truck

[@jsa8368]

Clay, is Mac still around?.. haven’t seen any vids of him for a few weeks

[@KoonTrucking]

Yep just been busy

[@jimc8041]

No more Mac Tool Thursday’s?

[@KoonTrucking]

Been busy

[@johnkolbjr8375]

What did that shop owner get for his employees?

[@madmanb1999]

Where's Mac Daddy Mike been?

[@kuruptprez21]

Hey clay I got a question for Hamilton so you know he was talking about shops being closed today so how does he go about payments from people that pay cash? Will he make them make a double payment next week or just let his customers continue making their regular payments?

[@Mike-ub1tc]

I pay cash to my dealer if I don't see him still set money out and pay next time I see him . At times text him chase him around to pay

[@kuruptprez21]

I always set aside money to pay my snap on dealer too. Only time I don't actually don't pay him is when he doesn't show up. I would meet up with him if he was close to the shop but he is usually out of town on his other stops. But either ways I paid them off Friday mainly because last time I talked to them they told me is they lose me as a customer it is what it is. So I definitely see how their outlook is.

[@KatoandSara]

We are trying to place your accent.

[@KoonTrucking]

Mississippi

[@KatoandSara]

@@KoonTrucking I win. I guessed it. 😊