How To Install Acura TL Brembos on a RSX Type S

  Рет қаралды 4,101

SnowDrift

SnowDrift

Күн бұрын

Пікірлер: 24
@its__wesley9494
@its__wesley9494 Жыл бұрын
no way finally new upload
@Googleuser1990
@Googleuser1990 Жыл бұрын
Did the Calipers come painted or did you have to powdercoat? If you had to powdercoat then how do you get the Brembo decal? Lastly if you did have to powdercoat do you have to completely Strip the caliper apart and then technically rebuild it? Thanks !
@urielortiz3667
@urielortiz3667 Жыл бұрын
Just got mine back in the mail. Definitely needed to see this!
@SnowDrift
@SnowDrift Жыл бұрын
Thanks for the feedback
@ArnoldConchas
@ArnoldConchas 4 ай бұрын
Did you have to change out your Brake Master Cylinder? If not, is your pedal lower? Which spacer brand are you using?
@SnowDrift
@SnowDrift 3 ай бұрын
No specific brand on the spacer. Just whatever I found on Amazon with quick shipping. I did not upgrade anything that I did not show in the video. The pedal did not change positions.
@ArnoldConchas
@ArnoldConchas 3 ай бұрын
Thanks, any vibration with the wheel no longer hub centric?
@SnowDrift
@SnowDrift 3 ай бұрын
@@ArnoldConchas I’m still running my rings.
@enzodepalma5610
@enzodepalma5610 Жыл бұрын
my only question is did you use the original rsx banjo bolt or did you get a tl banjo bolt?
@SnowDrift
@SnowDrift Жыл бұрын
The stoptech lines came with a new one. But the kit was made to attach to the factory caliper. So by that logic they should be the same for both.
@Heisman-wh6hr
@Heisman-wh6hr 5 ай бұрын
great video man
@SnowDrift
@SnowDrift 5 ай бұрын
Thank you. Hope it helped!
@vietbboi813
@vietbboi813 Жыл бұрын
So the wheel will no longer sit on the hub?
@DavidEstrada5336797
@DavidEstrada5336797 11 ай бұрын
Wheels don't sit against the hub they sit against the rotors....
@vietbboi813
@vietbboi813 11 ай бұрын
Wheels are intended to sit on the center bore of the hub. Which extends past the rotors. Otherwise the wheels are resting on only the lugs.
@kartman707
@kartman707 8 ай бұрын
Get aerogenics spacers with this upgrade
@Madrid-ee8qf
@Madrid-ee8qf Жыл бұрын
What year are these TL Brembo?
@SnowDrift
@SnowDrift Жыл бұрын
2008 I believe
@danielkaminske5048
@danielkaminske5048 Жыл бұрын
What wheel and specs do you have to clear the larger brakes?
@SnowDrift
@SnowDrift Жыл бұрын
17x9+22 RPF1
@danielkaminske5048
@danielkaminske5048 Жыл бұрын
@@SnowDriftthank you. I like it.
@Vtec588
@Vtec588 Жыл бұрын
How the car feel with brake bias does these improve over stock i want to do this on my rsx but i read on some reddit post that feel worst over stock type s brake?
@SnowDrift
@SnowDrift Жыл бұрын
I did not have that experience OEM RSX Type-S Brakes VS TL Type-S Brembo Upgrade kzbin.info/www/bejne/pZm9pXideNiMh7M
@KylePutman
@KylePutman Жыл бұрын
Woah. Hey stranger
OEM RSX Type-S Brakes VS TL Type-S Brembo Upgrade
7:32
SnowDrift
Рет қаралды 2,6 М.
TL-S 4 piston big brake kit- From Dc5creations
15:44
DC5CREATIONS
Рет қаралды 5 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
THIS IS A MUST HAVE PART FOR LOWERED RSX,EP3 & EM2 . SLIDER & RISER INSTALL!!
14:08
How to Install ANY COLOR LED on RSX Climate Control Lights
20:50
Lue Detailing
Рет қаралды 30 М.
$500 Brembo setup for DC5 (RSX) TL Type-S Brembos
7:54
Acura RSX Front Lower Control Arm Replacement DIY
11:00
Random Rebuilds
Рет қаралды 5 М.
The Acura RSX is Better with a WING! | OEM DC5 Spoiler Install
15:45
HOW TO: Honda K Series Valve Adjustment (Honda Master Technician)
34:34
RSX Progress Sway Bar and VooDoo LCA's Installation How To
20:10
Worlds First RSX Rear Big Break kit (Brembo)
24:18
LumberJack LifeStyle
Рет қаралды 7 М.