How any teeth are on the rear sprocket on the axle?
@owenchabot Жыл бұрын
@@nitan12339Go to 3:46, it shows how to drive it. Not hard at all! 👍
@Blakeyrobinson85811 ай бұрын
WHY IS IT TWO THOUSAND DOLLARS
@owenchabot11 ай бұрын
I’m 5’7
@dwainbertoncello56468 ай бұрын
Nice job, young man! I totally enjoyed every minute of this video. Keep up the great work!
@owenchabot8 ай бұрын
Much appreciated! Thank you for the kind words. More on the jeep coming soon!
@stevo55218 ай бұрын
Put rubber washers on each side of the bolts that hold the windshield. That should solve the windshield rattle. Nice video.
@owenchabot8 ай бұрын
Thanks for the tip! Glad you enjoyed it!
@dodgeme1986truck6 ай бұрын
Place camper/topper/tonneau cover self adhesive foam tape between the body and frame wherever they meet as well and some sound mat to the medium to large body flat panels it near completely negates the body vibration noise also it's better to use the rubber washers everywhere the body mounts to the frame (it'll prevent the body from wearing and cracking where fastened to the frame).
@bluebird80043 ай бұрын
Mate, this is an honest and clear review. You insights are well thought out and easy to understand. Stick with this, you're killing it. Love from 🇦🇺
@owenchabot3 ай бұрын
Thank you! Glad you found it helpful!
@MManiac91110 ай бұрын
This is a great video! All the extra info people like me want to know before buying.
@owenchabot10 ай бұрын
Glad you got some good information! Also, I’ve been trying my best lately to reply to comments so don’t hesitate to ask questions!
@dalehammond17498 ай бұрын
Very well done video. After watching a bunch of videos it appears to me that having some mechanical experience with this type of machine is crucial to owning one of these. If the purchaser is unable to maintain his mini Jeep, a repair person on hand to fix and/or upgrade is almost essential.
@owenchabot8 ай бұрын
You’re 100% right. That’s the whole reason I got this, to obtain some mechanical knowledge. I might look into buying a Chinese ATV with a little more power to step things up a bit.
@DanielGarcia-zz9eg10 ай бұрын
if only it came with 4x4
@owenchabot8 ай бұрын
For real 😆
@dodgeme1986truck6 ай бұрын
I am thinking about converting one to shaft drive and 4x4
@grovest.villain88595 ай бұрын
“Guys it’s not gunna drift why would I show you” camera cuts off 😂😂 that was gold brutha. Best mini jeep videos by far. I watch youres every time cuz im gunna purchase one here shortly . Good stuff man 👌🏻🤟🏻
@owenchabot5 ай бұрын
Thanks bro! Just saw your comment. Maybe I’ll try to see if I can make another on it in the next week or two. 👍😎
@steveo6018 ай бұрын
There’s an English KZbinr who did a 1000 mile trip from Salt Lake down to the southern border of Utah. Drove it over brutal terrain and broke some of the frame welds. I would say if you’re going to do crazy off-roading to re enforce it. Also get an engine temp gauge. He blew his first engine running over 200 for too long. Couldn’t get it cooled down. That thing looks really cool!
@owenchabot8 ай бұрын
Yeah I’ve watched his whole series on it, he’s hilarious. 😆 Good things to know!
@dodgeme1986truck6 ай бұрын
The trick is it needs an oil cooler to make it last longer by keeping it cooler
@waynebrown5428 Жыл бұрын
I just purchased the GR2 mini jeep. Some minor problems but all in all it was worth the price. Thanks for sharing.
@owenchabot Жыл бұрын
No problem!
@owenchabot11 ай бұрын
@@victork9938 Basically the main issues for us were that the brake lines were installed incorrectly and were too short. (The old lines were so short that it kept the wheels from turning to full range.) The other issues were because of the vacuum fuel pump (a piece of junk lol) so we installed an electric one and a fuel pressure regulator set to 3.5 psi. Other than that everything is pretty much fine!
@waynebrown542811 ай бұрын
@@victork9938 gas was leaking out of the overflow tube. Saferwholesale sent me a new carb, still need to install. The front brake lines had zip ties holding them to the frame. I put some saddle grip connectors on with self threading screws. The shifter keeps getting loose. I tried lock tite on the bolt but didn't work. Going to drill hole and put cotter pin in. All in all, very happy with it.
@waynebrown542811 ай бұрын
@@victork9938 no problem. Did you purchase one?
@andrewradom37728 ай бұрын
Great review young man
@owenchabot8 ай бұрын
Thank you!
@buster1789 ай бұрын
Keep your eye on the chain that it doesn't hit the side of the motor. The sprocket comes loose. Something 2 washes on the inside For spacers and a large on the outside drilled for the mounting holes.
@owenchabot9 ай бұрын
Good to know, thanks! I’ve heard about that, how the sprocket might want to rub up against the side of the motor.
@buster1789 ай бұрын
@@owenchabot Yah, Apparently it can rub a hole in it and damage the motor. But your video was well done
@owenchabot9 ай бұрын
@buster178 Thanks bro! If you want to, stick around because I might have a new video on the jeep sometime tomorrow!
@denischon6595 Жыл бұрын
Thanks a lot for the video. It was very helpful and detailed . You got me questioning whether i should actually buy it 😂
@owenchabot Жыл бұрын
Glad I could help!
@TheTriplelman8 ай бұрын
very cool, I'd wire the horn under the steering center, and weld a golf club carrier on the back to replace the tire and can.
@mikefowler3014 ай бұрын
I would laugh (in a good way) my AS! off if I saw that out on the golf course.
@chadakoin111 ай бұрын
Good job on the video. A rag or some foam rubber placed at contact points of jerry can will solve the rattle.
@owenchabot11 ай бұрын
I think so!
@dodgeme1986truck6 ай бұрын
Topper/camper/tonneau cover foam tape if installing the fuel can just for looks works the best if installed for actually use rubberized undercoating or truck bed liner works great
@dodgeme1986truck6 ай бұрын
Another option is double bubble rubber tailgate weatherseal tape
@dorei9235 Жыл бұрын
Very informative. Makes me want one.
@munkman20466 күн бұрын
i just bought the green xpro ranger, i live up on a mountain! we get snow every year, i was thinking of putting snow trax on the rear, buying a complete axel kit from amazon! whats your thiughts on this? whats the true length of the rear axel? appreciate any info! thanks bud , love ur video , it influenced me to buy the mini jeep, love the little ranger ,
@owenchabot6 күн бұрын
Yeah man! When I get a chance I’ll measure it. Also there’s a KZbinr named Carter Sharer who did that same thing with the tracks. Sick idea!
@GlmToto3 күн бұрын
Is it hard getting in and out of? I’m 63 with bad knees and back. 5’3” 185lbs with pretty poor physical fitness
@PROMETHEUS_VII Жыл бұрын
If Tom Holland and Michael Cera had a son, you would be him.
@OMC-xp1wq5 ай бұрын
The gas can bracket should have had a rubber gasket to stop the vibration. You could use a bike tire innertube (cut to fit) to reduce or stop the vibration on the gas can.
@owenchabot5 ай бұрын
Yeah I think they skimped on the bracket for sure. Good idea though!
@kronoswolf833510 ай бұрын
try to put a leather strap on the jerrycan strap that should fix the noise that your having.
@djharrington59957 ай бұрын
Good video, leaves you well informed, and i'll take the dive into ownership today
@owenchabot7 ай бұрын
Awesome!!! Congrats on your purchase. Hope you enjoy!
@dodgeme1986truck6 ай бұрын
If you do buy one look into getting and installing an oil cooler kit with a thermostatically operated fan as these engines will overheat when running hard or idling for extended periods of time (more than 5 minutes at a time) as without an oil cooler and fan they can run in excess of 200°f causing engine failure.
@MattC787 ай бұрын
I just got mine a few days ago. It is exactly like yours. Same brand and everything. Have you had an issue with your horn not working? Mine also the shift indicator does not stay lit up, and does not even light up at all for 3rd gear. Do you have any idea what my problems could be?
@owenchabot7 ай бұрын
Yes I have! What a coincidence as I’ve been dealing with the same problems too. I’ll have a chance to look at it tomorrow. It could likely be a faulty electrical connection as I’ve ran it through mud puddles and snow. I’ll get back with you when I get more info!
@owenchabot7 ай бұрын
Ok I fixed the horn problem! If you look under the red horn button, there are two wires: a green one and another that’s either white or black. Make sure both wires are touching that switch and see if it fixes your problem. Hope this helps!
@MattC787 ай бұрын
@@owenchabotCool, thanks man, I will check that horn fix. I appreciate the help. Let me know if you figure anything else out..
@dodgeme1986truck6 ай бұрын
There is also an adjustment inside some of the horns bodies themselves that requires a small screwdriver to adjust
@scratchragestudios9884 Жыл бұрын
Thank you for the info on the jeep. Good stuff. Also, do you think it’s possible to upgrade the engine?
@owenchabot Жыл бұрын
Not too sure since this one is a rear-engine. Currently we are installing an electric fuel pump which gives it more fuel to the motor and hopefully more power.
@dodgeme1986truck6 ай бұрын
Yes best mod to start with is an oil cooler and thermostatically operated fan
@dodgeme1986truck6 ай бұрын
Then you can get into chain ratio changes adding a few teeth to the axle sprocket will give it more torque especially helpful if you want to pull a small trailer (lawn mower trailer size) or carry some gear with you
@justinsane712811 ай бұрын
Good review bro
@owenchabot11 ай бұрын
Thanks dude! Glad you enjoyed it!
@JamesFlippin5 ай бұрын
Excellent and very useful video!
@owenchabot5 ай бұрын
Thank you!
@REVNUMANEWBERN10 ай бұрын
NEW to looking at these so sorry for what may be stupid questions, there appears to be different companies making these: a) Is this the REAR engine model? If so does the design appear that if the motor clapped out you could rig a Harbor Freight engine in it as a replacement? b) I'm looking at it as a CHEAPER way to pull my pull behind grass cutter, do you think it would pull such on level ground with ease?
@owenchabot10 ай бұрын
Yes, there are various companies. The two main brands are Coolster and X-Pro. All other companies seem to copy from them. Anyways, Coolster jeeps have a front engine with a chain that goes all the way to the back. They have less features than X-Pro jeeps and are more expensive. Looking at the X-Pro jeep, they can be found on Amazon, they have more features, and they have a slightly upgraded motor (9.5 n•m torque) that sits in the back. To my surprise, the X-Pro jeep is slightly cheaper! Lastly the jeep has a 3 speed transmission with an impressive 1st gear. The trails we drove on have steep hills and it gets up them just fine. Depending on the weight of your attachment, it may be able to pull just fine. P.s. these aren’t stupid q’s at all! I enjoy answering them cause I’m sort of a car nerd… Hope all this helps :) -Owen
@casperwnihlen2 ай бұрын
How much does insurance cost
@peterbedrosian6227 ай бұрын
great video
@owenchabot7 ай бұрын
Thank you!
@kipohara59928 ай бұрын
Hey Owen, I'm looking at one of these at Tractor Supply here in Connecticut, the one I'm looking at has the engine up front under the hood like a regular car does, but noticed yours in more under the seat........what's the difference if any other than location?
@owenchabot8 ай бұрын
I’d say the likelihood of the chain falling off may be higher on the front engine model but I’m not certain. I think you’d be just fine getting a front-engined model. Some people with the front motors actually find it a bit easier to steer when out in the snow. Hope this helps!
@dodgeme1986truck6 ай бұрын
It's basically a toss up between the two but if you do get one use a zddp additive in your engine oil and a must if it's going to idle or be run full throttle for 5or more minutes is to add an oil cooler and thermostatically operated fan
@ATLRCFlyer7 ай бұрын
The jerry can rattles because you didn't put the two plastic protection bands over the steel bands.
@owenchabot7 ай бұрын
Yes we added those bands later.
@ATLRCFlyer7 ай бұрын
@@owenchabot did it help? And overall are you pretty happy with the mini Jeep? I'm looking into getting one myself. That's how I found your video
@dodgeme1986truck6 ай бұрын
@@ATLRCFlyer a necessary mod is to add an oil cooler and thermostatically operated fan especially if running full throttle or idling for 5minutes or longer (they really should come with them) Also you will need zddp oil additive as the rocker arms operating the valves are flat tappet... And only ethanol free fuel... Make sure the rear axles bearings get greased alot of sellers don't do this during their pdi and it wrecks the axle bearings. Go through every fastener and make sure they are tight a good thing to do is add rubber washers to all the body mount hardware, truck camper/topper/tonneau cover foam tape between the body and frame wherever they meet as well and some sound mat to the medium to large body flat panels it near completely negates the body vibration noise.
@dodgeme1986truck6 ай бұрын
Another great mod is to convert to a group 24/27 dual purpose battery especially if you plan to add a winch as the stock battery just isn't big enough and will become unusable after only a few uses. Also it is a good idea to add a master power disconnect between the battery and all electrical components
@bryangrim602111 ай бұрын
Cool video. Thank you. Can it pull a little lawn wagon or trailer? Does it have a hitch (hole) on the back for this? If not, Can one easily be added?
@owenchabot11 ай бұрын
It’ll pull something small, I’m not too sure what the weight limit is, it all depends on the speeds and terrain you’re wanting to tow on. However I don’t think a hitch ball or hole should be hard though.
@dodgeme1986truck6 ай бұрын
Some do have a hitch some don't depends on who made it... If the one you buy doesn't have one you will want to make sure that the hitch attaches to the frame at the rear swing arm mount (not the swing arm as these swing arms tend to break while towing at the axle(known issue) also if towing it will need an oil cooler with thermostatically controlled cooling fan added (best to install even if you're not going to tow with it) as the engine oil also cools the wet clutch and idling or running hard for more than 5 min. can overheat the engine... You will need a zddp engine oil additive as well since it is a flat tappet (built into rocker arms) engine. And run no ethanol fuel (ethanol destroys the fuel system quickly).
@yvngkat23687 ай бұрын
Have you had any problems with the chain rubbing the engine in the back ?
@owenchabot7 ай бұрын
Despite some horror stories I hear from other people, I haven’t had any issues. I think the problems come when people incorrectly swap sprockets.
@dodgeme1986truck6 ай бұрын
Alot of the sprocket issues come from the sprocket getting loose as well as warpage from overheating (best mod to prevent this is an oil cooler and thermostatically operated fan especially if running full throttle or idling for 5minutes or longer at a time (keep the engine oil between 100-150°f any hotter and the oil will degrade rapidly and allow the engine to overheat and warp) honestly they should come with oil coolers
@tomschloesser47874 ай бұрын
It's like a Power Wheels on steroids. Haha!
@kyle_coetzee Жыл бұрын
Can u post more about the mini jeep please
@jeffmonroe63174 ай бұрын
I think a break in period for a new engine is 100 miles.
@jimmywallace2687 Жыл бұрын
So it will do 40 mph? (in video it looks like 30 was maxed out) Would love to see it do some small hill climbs.
@owenchabot Жыл бұрын
It’ll do 40 mph pretty easily. I did the test on a hill so that’s why it didn’t hit 40. We did a pretty good hillclimb test in another video on my channel.
@somecarperson Жыл бұрын
i assume this thing comes with all the tools and such and instructions you would need to put it together
@owenchabot Жыл бұрын
I think it has most of the tools but I suggest having a drill to speed up the process. There is a video for assembly though: kzbin.info/www/bejne/rH-1YWl8pMeBe5Ifeature=shared
@somecarperson Жыл бұрын
@@owenchabot Thanks
@1983thunderbird8 ай бұрын
Excellent video .......good job!
@owenchabot8 ай бұрын
Thank you very much!
@1983thunderbird8 ай бұрын
@@owenchabot you're welcome! I do have a question, it looks like the hood is plastic but is the rest of the body made of steel ?
@owenchabot8 ай бұрын
@1983thunderbird Yes the hood is plastic. The body is some kind of polymer.
@1983thunderbird8 ай бұрын
@@owenchabot ok thanks for the reply 👍
@derrickshepherd3472 Жыл бұрын
Cut a foam pool noodle and put it around your gas can strap😉
@owenchabot Жыл бұрын
Good idea!
@NothingToNoOneInParticular Жыл бұрын
How tall are you for size comparison.
@owenchabot Жыл бұрын
I’m 5’7 and the jeep is just fine. I ride with the seat one notch from the back so if you’re taller you can move it as you need.
@michaelangelo75118 ай бұрын
I almost bought one. But I was skeptical after seeing all the negative reports. The problem is the insecurity of the Chinese motor. If it were a real Honda I would not have hesitated and there is no repair depots anywhere near. If is has problems the owner is S O O L .
@owenchabot8 ай бұрын
Yeah it’s not exactly like a Honda or Can-Am at all. You need mechanical knowledge to own these.
@michaelangelo75118 ай бұрын
@@owenchabot thank you!👍🏻🇺🇸
@steverugerguy96068 ай бұрын
What kind and weight of oil does it recommend?
@owenchabot6 ай бұрын
Either 10W-30 or 10W-40. Depends on the climate of your area.
@dodgeme1986truck6 ай бұрын
Avg daily high temps Below 32°f 5w30, 32-80°f 10w30, above 50°f+ 10w40
@kotorspottingYT Жыл бұрын
THE COOLEST MINI JEEP EVER
@owenchabot Жыл бұрын
It actually may not be as chill as you think lol, it has surprised me!
@kotorspottingYT Жыл бұрын
@@owenchabot I meant coolest srry
@owenchabot Жыл бұрын
👍
@micanzdablio27626 ай бұрын
Is this available in the Philippines?
@owenchabot5 ай бұрын
I’m not sure
@annereiner842410 ай бұрын
something you could do to avoid breaking brake line is downshifting and using the engine to slow you down. All semis do some sort of this to save on their brakes.
@owenchabot10 ай бұрын
We recently figured out that the reason they blew is because they came from the factory being too short in the first place.
@dodgeme1986truck6 ай бұрын
If replacing one brake flex hose you really need to replace the other sides brake flex hose as doing only one can cause the front brakes to operate unequally.
@bbaaspencer16 ай бұрын
I see people on mini Jeep’s will break the rear axle . It’s too small for the weight
@TheMariposaEffect10 ай бұрын
I know you mentioned it was quiet, but would you say it’s quieter than say a ride on lawn mower? Trying to decide how much this will irk our neighbors if my son takes it out in the woods.. 😂
@owenchabot10 ай бұрын
Oh it’s super quiet. Quieter than a lawnmower for sure.
@kuil10 ай бұрын
About the same as a small motorcycle
@dodgeme1986truck6 ай бұрын
You can also add sound deadening material to the underside of the body panels and foam truck camper/topper/ tonneau cover tape between the body and frame wherever they meet as well as rubber washers between the body bolts and body panels to really quiet it down
@tobadsosad10409 ай бұрын
Hey bud did it come with oil already loaded
@tobadsosad10409 ай бұрын
I can't find the dip stick
@owenchabot9 ай бұрын
@@tobadsosad1040 Dip stick is on the side of the engine, it’s a plastic knob I think. It comes with oil but it needs to be changed after the break-in period.
@dodgeme1986truck6 ай бұрын
Don't forget to grease the rear axle bearings they come dry.
@tarrahhern99754 ай бұрын
Good job thank you
@owenchabot4 ай бұрын
You’re welcome!
@duaneulman991511 ай бұрын
Thank you 😊
@markburton86808 ай бұрын
What the max weight capacity?
@owenchabot8 ай бұрын
Max weight is 350 lbs
@cadilakisrodcustom6 ай бұрын
So i picked one of these up today, and can smell what i think is clutch while driving, anyone else have this?
@owenchabot6 ай бұрын
Just happened to see your comment. What does it smell like? In fact I think we could be possibly having clutch issues, too.
@cadilakisrodcustom6 ай бұрын
@@owenchabot it smells like a hot clutch, im hoping it's just breaking in since it only has about an hour on it.
@GAAedits Жыл бұрын
What does it cost?
@owenchabot Жыл бұрын
$2,000 on Amazon but that doesn’t include shipping ($400).
@GAAedits Жыл бұрын
@@owenchabot thanks
@ronbaker660011 ай бұрын
nice job
@cjwolf2510 Жыл бұрын
40mph or km?
@owenchabot Жыл бұрын
40 mph!
@LCSQSB4 ай бұрын
So it is not 4x4?
@owenchabot4 ай бұрын
It’s not, it does have a solid rear differential but someone should do a 4x4 mod soon though.
@everydaybladesinc5 ай бұрын
One thing to note. It’s a Chinese clone Honda engine not a real Honda engine.
@محمدحجازي-ل7خ9 ай бұрын
How much
@owenchabot9 ай бұрын
$2,000
@hphillips74258 ай бұрын
Good video
@owenchabot8 ай бұрын
Thank you!
@jacksonmarshallkramer50878 ай бұрын
A 450cc Motocross bike engine needs to go in it.
@owenchabot8 ай бұрын
😂😂😂 that would be sick
@RollieKid9 ай бұрын
👍
@mrrussianspy51242 ай бұрын
bro imagine modding that thing
@owenchabot2 ай бұрын
Haha that’s exactly what we are doing right now!
@mrpoofthekoala Жыл бұрын
Hello There! 🐨
@owenchabot Жыл бұрын
Hello 👋
@kpolak809 ай бұрын
já to chci pro sebe a to mi je 43 let :-)
@johnnytherock12497 ай бұрын
Bruh I live in Namibia I don’t know how to get jeep
@owenchabot7 ай бұрын
Try checking your local dealers for more information.
@johnnytherock12497 ай бұрын
Thnx I will try
@moparjr89 Жыл бұрын
diffently not a honda engine
@austintx_planespotter8561 Жыл бұрын
Seriously I can get a mini Jeep at the price of a camera Len???
@owenchabot Жыл бұрын
That’s right!
@NathanielShorts-u6b9 ай бұрын
people who think he looks like a actor from dhar mann
@geraldmiller52608 ай бұрын
I got a real classic Jeep for less than this price.
@owenchabot8 ай бұрын
That’s great!
@DenverDuncan-zm74 ай бұрын
Koel Jeep
@stevebradeen8924 Жыл бұрын
Seatbelts wouldn’t rattle if you wore them
@repsol61988 ай бұрын
Or just unbolt them and throw away !
@dodgeme1986truck6 ай бұрын
They actually really shouldn't be worn without a rops
@williamglasco44557 ай бұрын
DONT KNOW WHAT YEAR THAT JEEP IS IVE GOT ONE THATS 9 MONTHS OLD DOSNT HAVE EVERYTHING THAT ONE HAS WAS TOLD IT WAS A METAL BODY AND ITS NOT ALREADY BUSTED A FENDER HAS SMALL MIRRORS WHOLE THINGS FALLEING APART ITS A PIECE OF SHIT😢
@sandie17986 ай бұрын
Ummm…This isn’t a Real Jeep, so I’m just wondering what kind of driver you are. I imagine that if you had a metal body, it would be creased, dented and bent…instead of cracked; which still wouldn’t be pleasing to look at. I think the metal one is sold at Tractor Supply.
@Gruuvin14 ай бұрын
Not 4wd and $2500! America is screwed when cheap Chinese junk is too expensive.
@adameq73038 ай бұрын
i can drive manual so im better than 80% of americans! im 13 :)
@owenchabot8 ай бұрын
Dude that’s sick bro! I learned at 14!
@adameq73038 ай бұрын
@@owenchabot nice👍
@saidjsai770 Жыл бұрын
ilikebro,myanmar
@joewildwest22418 ай бұрын
that’s not a honda engine, chinese less clone
@owenchabot8 ай бұрын
Yes, it’s a clone from a Honda engine but still very similar.
@repsol61988 ай бұрын
If it had a Honda engine it would cost double the price !