Soft starter works with contactor

[@amullabarman8024]

Good performance.this video is talking about the line to line and wiring diagram showed

[@JaykeSapalaran-iq3qs]

Great video information 👍 thanks for sharing your knowledge ♥️🇵🇭 HOW'S THE PROGRAMMING IN SOFT STARTER? HOW TO PROGRAM THE input and output?

[@brad1716]

How would i use the contactor if I did not have a neutral?

[@rahimudinpathan4609]

VFD की कंट्रोल वेयरिंग पे भी वीडियो बनाए

[@michaelmeisman4731]

Nowhere in your videos on soft starters do you show how to wire the 2 wire connection for start and stop. I am using a remote control to turn on and off the machine so I have a 120VAC output as a signal to the soft start to start or stop. I also cannot find anywhere what signals terminals 1 through 12 are looking for. I have the unit sitting on my bench now and this information is not even in the manual. Also your 2 different videos show different wiring for the terminal 1 and 2 wiring to the bypass relay

[@daneiserman908]

Thank you I am the only one who cant get answers.

[@michaelmeisman4731]

@@daneiserman908 I have since figured all this out. The product itself works great but the instructions are awful. If I can help you please let me know.

[@daneiserman908]

@@michaelmeisman4731 Hey Mike good morning, No sir I have not figured it out. I also am using remote start 100hp and 200hp motors.Any help would be greatly appreciated.

[@daneiserman908]

@@michaelmeisman4731 If you can please help me it would be greatly appreciated. I am trying to remote the drivr also, I have not been able to figure it out.

[@matbasic4290]

Boss me i ask how many seconds before bypass contactor activate?

[@khagendranathmahato5564]

If you speak then video is perfect

[@harisinghrathore995]

Sir isi tarah Schneider altistart ka diagram bhi bataye ATS22C32Q

[@abdulwajid3584]

what about 3 & 4 no. terminals used for? Can be used for PLC feedback?

[@ATOcom]

They are delayed closing contacts and can be used at the input of the PLC.

[@danangeko8396]

If not install bypass contactor, what the effect?

[@michaelmeisman4731]

It will not work as the soft start shuts off current flow and reroutes it to the bypass contacter.

[@jeri5410]

Can we use soft starter with star delta bypass?

[@ATOcom]

Yes you can, it has RS485 port.

[@sakilaya956]

Soft starter me kha uoj hotahe

[@jeyabalanramasamy6426]

Where can buy soft starter in chennai

[@ATOcom]

This link, www.ato.com/softstarter

[@pba21]

🤔 maybe Tesla needs this soft start

[@ATOcom]

maybe....

[@rentalacdangensetofficial7260]

Hadir

[@el_automation]

Very nice! )

[@hungphong8h163]

Can I take 3 phase 380v from the output of the inverter to supply it to the soft start?

[@ATOcom]

Is your inverter used to adjust the motor speed (VFD)? Or is it just a DC-to-AC device?