So what other "crash-course" type videos would you guys like to see?
@MaddogJones4 жыл бұрын
A beginner's crash-course on multimeters... I just bought one and have no idea how to use it. Would be much appreciated.
@megamanchamp35944 жыл бұрын
OOH i know I can google it but how to modify and create your own retropie OS
@webmastercorey4 жыл бұрын
Followup around fixing common soldering errors when you run into them. And which ones can't be fixed.
@whateverfitzIt4 жыл бұрын
Great video, a crash course on components like capacitors and resistors would be very appreciated as well as ohm's law maybe.
@blakeromo4 жыл бұрын
@@MaddogJones Same here just bought one
@darosenberry3 жыл бұрын
I'm an electrical engineer, and this is the best video I've found on KZbin for a primer on soldering. Excellent work!
@N-the-Kitchen-with-Markus3 жыл бұрын
Agreed even though I'm just a ET.
@The1Music2MyEars3 жыл бұрын
Be wary though he didn't mention that tinning the tip is essential before even using a new soldering iron and after each use. Using tip tinner rather than 60 40 solder can shorten the life of your tips
@nomanfaizan56393 жыл бұрын
@@N-the-Kitchen-with-Markus b
@malachilyons77543 жыл бұрын
Why is an Electrical Engineer watching this??? 😂
@N-the-Kitchen-with-Markus3 жыл бұрын
@@malachilyons7754 nothing wrong with it cause electrical engineering is different than an electronic engineering
@amigo4558 Жыл бұрын
Soldering technology is so advanced now. I started it 57 years ago when there was no electricity at my home. During midnight, when my mother slept, I used to solder wires for my tiny transistor radio with the fire wood left at the stove. Now, you can see a variety of sodering irons and hot blowers. We must keep abrest with the development in technology in order to be a successful technician. Thank you very much for your tips on soldering.
@rlgn19503 жыл бұрын
I'm a 71 year old female who has been soldering here and there for most of my adult life, I never claimed to be an expert. Thank goodness because I just learned a few things that made me realize that I've been doing a couple things wrong. Thank you for posting this video. I certainly do appreciate it because I'm going to attempt to replace the switches in my M570 Trackball mouse.
@yallaaAIC3 жыл бұрын
Hope it went well!
@johnlamarca94393 жыл бұрын
I am also 71, and you know more about soldering than I do... Before you watched this video...
@ultraali4532 жыл бұрын
That is so cool. I'm attempting to replace switches on my mouse too. I hope it worked out for you.
@innosyde71882 жыл бұрын
A female with the name Rickie...?
@HeLrAiSiNg12 жыл бұрын
@@innosyde7188 DID YOU JUST ASSUMED HIS GENDER ?
@mskiara18 Жыл бұрын
I have been curious how difficult soldering is, so I express my thanks for creating this guide to assist beginners. Soldering is definitely an essential skill to learn.
@Alfredo-fd3rd Жыл бұрын
I so glad for what you said i really appreciated it I take my Hat off To You thank you so much 🎉 1:10 1:10
@guayabito6946 Жыл бұрын
Its not dificult at all once you learn how to do it properly, what is difficult is desoldering.
@theronleigh1980Ай бұрын
i don't have a soldering iron so i'm trying home methods. is hanger going to work?
@robertcasey73123 жыл бұрын
Terrific Video TY. Haven’t soldered in years. I just inherited the contents of an early Radio & TV Shop. It sold and repaired both. It’s been preserved and passed down over the years. The shop opened around WW II. Each item resembles a museum piece. Hundreds of radios & TVs. Tens of thousands of repair parts; bulbs, etc..+. It was my Grandfather’s shop. The shop was successful, but he pretty much kept it just for storage and repairs. He’d started installing TVs in hospital rooms. Back then patients paid rent to watch TV. He supplied thousands of TVs and collected rental fees. Here’s something shocking I learned. His TV rental customers were billed by mail. In the 1980s I asked him: “Of those countless customers how many never paid you?” He looked down as if he’d never considered such a thing, paused, then replied, “Honestly Bob, I know it was less than 5, I’d guess 2 or 3.” A different era. As a young man he tried to enlist but he’d been born blind in one eye. He spent the War learning the trade via a mail order correspondence course. He saved everything. The lessons and catalogs are so damn cool. There are even rolled up 6’ x 6’ schematics of early TVs. They’re beautifully artistic, I’m framing a couple. The family folklore goes like this: Grand Pap Ben built his own first TV. In fact the first one in the neighborhood. His parents, my Great Grandparents, had to point this amazing new invention toward the front porch windows to accommodate the overflow of outdoor curiosity seekers. I have his Shop’s working neon sign. The name of the shop circles a 2.5’ clock. We were fortunate, with five generations for years. Forgive me, I’ve gone on too long. I love him and miss him still. TY
@sarahclark4132 жыл бұрын
I read the entire comment and I’m so glad my patience actually allowed me to! My ADD usually gets the best of me but ur little story was so cute and worth it🤗
@cuda426hemi2 жыл бұрын
What are you going to do with the stuff? I know guitar geeks would LOVE old transistors, oil caps, potentiometers etc. Do you think you'll ever itemize and sell? ⏚
@3399-s5f2 жыл бұрын
share more about your grandads shop please, what i just read got me extremely curious id love to see or help you organise this group of items so other people can explore this collection, it sounds like his buisiness is also a it of a time capsule, from what year did he start trading and in what country, im from the uk, you should make a mini tv museum in honour of your grandpa ben but make it virtual, you can buy devices that scan 3d real world objects then you could upload high resolution versions of each item you catalouge hope to see this some day, let me know if you need advice or ideas i have an abundance of them!
@moose6152 жыл бұрын
Great story, thanks for sharing!
@elunac23622 жыл бұрын
It sounds like this can be a Historic Landmark or museum ;)
@dustinfrancisblue312 жыл бұрын
Finally: A truly articulate, intelligent, no-nonsense guy, and a very well-done video!.... Give me more!
@MD-wk3gj4 жыл бұрын
I’m 4 minutes in and realize this is the exact detail without fluff I’ve been seeking. Thank you. I’m learning a lot and already feel more confident.
@Bazza.baz2244 жыл бұрын
I've learned it's apparently called 'soddering' according to him. 😕
@hubsche14 жыл бұрын
@@Bazza.baz224 unless you're outside the US. What can I say? We're a little odd about pronunciation, sometimes.
@akpokemon3 жыл бұрын
@@Bazza.baz224 i mean...he like directly addressed that in the video but keep crying i guess
@goodun29743 жыл бұрын
@@akpokemon , yeah, ask Bazza how he pronounces "subtle": as suttle or sub-tul?
@thenextlayer Жыл бұрын
Yeah I've been soldering since I was like 10 with my dad, and I didn't know most of this. You just upped my solder game BIG TIME. Thank you
@goodun29743 жыл бұрын
A couple of comments that may be useful to newbies. Traditional tin- lead solder that is designed for electronics usage usually contains a rosin flux which is actually a pine tree type product, non toxic, and generally non corrosive and non conductive. The fumes from soldering this type of solder may be mildly irritating to your nose and throat, but the boiling point of lead is much higher than the temperatures you are soldering at and therefore any kind of lead poisoning scenario from the fumes is extremely unlikely, but you should certainly wash your hands after handling it. Lead free solder generally uses a very different type of flux made from organic acids, the fumes of which are extremely unpleasant to breathe and can be potentially toxic. Those specialized lead-free fluxes are also both conductive and corrosive and *must* be thoroughly removed from the circuit board or they can cause problems for the circuitry had some later date. Rosin flux is best dissolved and cleaned away with alcohol, but lead free type fluxes are often water-soluble and may or may not clean off easily with alcohol. Also note that lead free solder is more corrosive to the soldering iron tips than lead solder, partly because of the corrosive effects of organic fluxes and especially because of the higher temperature tip settings necessary in order for lead-free solder to flow well. Regardless of which type of solder you are working with, the soldering iron tips will degrade with time and use, so be sure to buy a couple of spares, and ideally you should buy an arrangement of shapes and sizes. For most electronics work I find that the simple conical, sharply pointed tip as used in this video is not the preferred tip shape. A chisel shape tip with a rounded, blunt end works best for about 95% of my electronics work. Get an assortment of tip sizes and shapes to experiment with. Note that high quality soldering tips are usually made of copper (or sometimes brass) that has been plated with iron or steel. Steel resists the corroding effects of solder and flux much better than plain copper does, and yet still wets to the solder well; copper is a better heat conductor, but plain unplated copper very quickly pits, corrodes and oxidises from the constant heat and chemical effects of the solder and flux. So many of the soldering tips are made in Asia nowadays, probably from a variety of recycled metals, that you might have to try several different brands and sources to get something that lasts a reasonably long time. I do like the brass wool tip cleaner shown in the video here; they work quite well and I have read elsewhere that the traditional wet sponge cleaning technique tends to cause micro fractures in the tip and shortens its life. (The springy brass sponge tends to fling little bits of solder around as you clean/wipe the tip, and so a holder with a hood over the brass wool will help contain the mess). You can use steel wool to clean the tip if absolutely necessary, but with proper tip care, maintenance and suitable temperature settings, steel wool shouldn't be necessary. By the way, the "best" way to turn the tip of the soldering iron so black and oxidised that it doesn't work well for soldering is to use it to melt and fuse plastic parts, repairing cracks and so on; a useful technique, but keep a sacrificial extra tip around just for that use. By the way, *never* scrape a soldering iron tip with a razor blade or take a file to it in order to "clean" it (as shown in some You Tube videos). Never! You will remove the steel plating and the tip will wear out that much faster. You may find it instructive to put a magnet to the soldering iron tip and see if it is magnetic to any degree. A copper or brass tip that is still plated will have at best a very mild magnetic attraction. If it's strongly magnetic then the chances are good that the entire tip is made of steel. If a highly magnetic steel tip still works well for your soldering purposes, that's fine, but generally copper or brass are better heat conducting materials for our purposes.... Regardless, lead-free solder often tends to make a more grainy, crystalline, dull looking solder joint, and the solder joint is likely to break down prematurely if exposed to extreme heat from a power supply resistor or regulator, and interestingly also tends to break down in extreme cold temperatures and form "tin whiskers", aka dendrites, that can short-circuit to adjacent parts or circuit paths and PCB foil traces (as polar explorers and NASA engineers have discovered, the hard way; Google "tin pest"). I personally prefer traditional tin- lead electronic solder with a flux core. Lead free solder doesn't wet and flow as well as lead solder, and is responsible for numerous devices breaking down and failing prematurely and ending up in the landfill. If you are just starting out learning to solder, I recommend that you start with lead solder, and only use a known, name brand product from a reliable source, such as Kester or Weller. Be advised that solder, or the flux inside of it sometimes seems to go bad if it is old and therefore freshly made product is probably better. There's also a lot of variation in lead free alloys and the fluxes they contain. Probably a good idea to buy at least 2 different brands of solder from different sources and see if one is easier to work with or gives you more consistent results. It is also a good idea to buy yourself some separate flux in paste or liquid form; but unfortunately I have seen cases where soldering flux that isn't actually designed for work on electronics is being sold to electronics hobbiists. Always check the label on the bottle to see if it has a precaution against using it for electronics work. The highly acidic ( and corrosive) fluxes designed for soldering copper water pipes are not the same as, and not interchangeable with, fluxes designed for soldering circuit boards and electronic components; nor can plumbing solder be used as a substitute for electronics solder. Be aware that there is a special-purpose "soldering paste" which is a mixture of powdered solder (typically lead-free) and flux, designed specifically for soldering microprocessors with miniature, nearly microscopic pins (or hidden "pins" on the underside of the processor chip), and therefore is not the same as plain soldering flux.
@neonlights_122 жыл бұрын
The bit about the fumes from soldering coming from the rosin and not lead was super good info. As someone who's allergic to half the known universe but wants to do soldering for projects it's good to know that A: I won't be giving myself lead poisoning and B: Any allergic reaction will probably be from a tree allergy lol
@goodun29742 жыл бұрын
@@neonlights_12 , Here in New England I frequently see some kind of pine or fir trees on my walks in the woods that appear to be bleeding sticky sap down the side of the tree. I intend to bring some home and see if it will actually work as soldering flux! My best guess says that it will, although it's probably not a bad idea to dissolve it in a little alcohol to make it thin enough to run it through a filter and get out the bits of bark first, and then evaporate the alcohol off....🙂. Anyway some people claim to be allergic to the flux fumes, so just use a fan or a shop vac, or solder in a well ventilated place, and you should be fine. Have fun!
@jalendvenn79902 жыл бұрын
Definitely good to know! I was thinking I was going to buy lead free because it sounds more safe haha
@goodun29742 жыл бұрын
@@TD75 , Thank you! That is easily the nicest thing anybody's ever said about one of my comments. I am glad to have been of some help to people. One of these days I'm gonna have to post some videos of my own, but I am an analog guy in a digital world and not very skilled with smartphones and computers, so it would be a steep learning curve for me.
@superman27892 жыл бұрын
The tip about using the round chisel shape tip was very helpful. I tried the point tip first and I wasn’t have very much success making clean solder points, but after I switched tips it was much easier. Thank you!
@nolanreitz8 ай бұрын
I’m looking to become a computer engineer, and this tutorial is going to be invaluable for me. I really appreciate you taking the time to go through every step of each type of connection. Keep up the awesome work!!
@Obsidian_Iris_ Жыл бұрын
This is the best tutorial on soldering for those who know next to nothing about it. Every other tutorial for beginners I’ve watched assumed the newbie knew what tools and supplies were needed, they just needed to know how to use them. I appreciate that you explained what the specialized substances and materials and what they do in the process.
@jjsolis8259 Жыл бұрын
I just replaced the faulty cord on my old Sony MDR-7506 headphones with your help, particularly the "wire to board" section of your video! I am forever grateful to people like you who offer advice and tutorials to those of us who can't afford professional repairs or replacements. Thanks a million!
@tavarisjones5512 жыл бұрын
Your first tip was crucial to me to learn to solder. I initially thought that you got solder on the tip and almost "painted" it onto the wires. Learning that you heat the wires so that the draw/wick the solder in place was a game changer for me and led to work that was very passable :)
@Porkleaker2 жыл бұрын
yeah once you see desoldering using wick and flux it makes more sense just in reverse 👍
@HardWhereHero11 ай бұрын
Good to hear, I am hoping for the same so I can start fixing graphics cards and consoles.
@JustMamba2 жыл бұрын
3:02 So many beginner videos use this technique. It was really frustrating trying to replicate. In the end I got it working but it was a pain. After watching your video I went and did a similar build to the one I did before. Not only was it way faster but alot easier to get the solder to sit the way I wanted it to and used alot less solder.
@Chuck_Carolina2 жыл бұрын
Solder flows to the heat. There is a thermo-nuclear bond that happen when to touch a wet solder tip to a part. Once you make that bond heat flows into the part (a pad, a through hole whatever); now just get those two parts to get into this heat and let the joint happen - and get off the joint. Give it the heat, add a little solder when you see the bond happening and get off of it. Easy-peezy
@justinbeathe5524 жыл бұрын
Thank you. Seriously. Nothing like learning from a person who knows what there doing and takes pride in there craft.
@trumpatier3 жыл бұрын
they're* their*
@mikeburns3662 Жыл бұрын
I’m retired and just starting out to try to see if I can do some board repairs. This is by FAR the best and most concise tutorial I have seen explaining soldering. Nice job & thank you sir!
@Lep_193 жыл бұрын
Excellent video, helped get me from never holding an iron to finishing my first electronics project. The one thing I'll say that I'm kinda surprised wasn't mentioned in the video and doesn't seem to be very frequent in the comments: keep things ventilated! The wisps of smoke that come off the iron are mostly flux fumes, and they can cause chronic respiratory issues (namely asthma). The lead in leaded solder is most dangerous if flakes of it (like, say, the ones that tend to come off the tip of your iron when you clean it) are ingested or inhaled, but soldering with it also produces some lead-based fumes that are equally dangerous with enough exposure. Make sure the space you're working in is reasonably open; open a door if you're in the garage, a window if you're in an office, etc. If you can, use a carbon-filter-based smoke absorber to pull those fumes away from your face and to keep the air cleaner. If you don't have one (or ideally even if you do), use a desk or household fan behind or to the side of you to push air away from you and toward the open window/ventilation.
@StevePorter_au2 жыл бұрын
Really glad you mentioned rosin core solder. I've seen so many comments about soldering where people say you have to use flux. I worked for years doing electronic repairs on telecoms and radio gear and before that, electronic assembly. I never once used flux, because all the solder I used was rosin core. Even when I was trained in high-reliability soldering, we never used flux.
@CaptainDirt19994 жыл бұрын
Finally! A guide that's both broad-spectrum and specific on each individual subject from a reliable source. Thanks a ton!
@nizarsami2432 Жыл бұрын
this is the best video I've found on KZbin for a primer on soldering. Excellent work!
@ericyokie1423 жыл бұрын
This was great! I've never soldered before and ordered an adapter board for my pi with unsoldered components, because I've always wanted to solder and was determined to do it myself. With your help, I got it right on the first try! Thank you. I can now connect Atari 2600 controllers directly to my RetroPie for a more authentic feel 🙂
@jb6789012 жыл бұрын
Glad I stumbled upon this channel and specifically, this video. I just bought a venerable Nakamichi SR-2E receiver with the famous Nelson Pass "STASIS" amp (c.1986, EXC+, $120). My plan is to buy the capping kit ($60) and recap the whole thing, bringing the unit back to better than original spec. Aside from some TLC to the innards, this tutorial is a big help in preparation for this DIY job.
@itwsntme2 жыл бұрын
After watching countless soldering videos making it look easy, trying and getting no results whatsoever, this one finally gave me all the information I needed in a clear fashion. I was able to reproduce all the exercises, except that last board on board one, which I'm not interested in at the moment. I have several projects that I had been putting off because of lack of confidence in my soldering, that can now tackle. Thanks so much for this.
@markodriscoll3660 Жыл бұрын
Cant believe I only found this channel now. Should keep me occupied for the next couple of months. Excellent content.
@hollythompson77762 жыл бұрын
I didn't know anything about soldering before your video, now I do. Thanks for a clear, easy to understand video that gave me a very good understanding of basic soldering! Great start for a newbie!!
@mimetist_oficial2 жыл бұрын
Thanks a lot for sharing! It is so hard nowadays to find a video that is informative, right to the point and not filled with ads/promotions.
@tonydiorio3748 Жыл бұрын
Ive always just winged soldering and learning through trial and error, but this definitely filled all my knowledge gaps. Love all the tips and tricks. Thanks!!
@Gee-Dee-q1e2 жыл бұрын
I've watched this video in the past, but must not have been ready. I'm back into having the need to efficiently solder, and re-watched this video. A lot of things made more sense to me this go round. Thanks for all the care in the instructions. You, sir, have earned my subscription more than twice over.
@charlesconnelly12793 жыл бұрын
Very helpful to a beginner and I haven’t started yet but am sick of not being able to fix my own electronics thank you
@dookieshoes88 Жыл бұрын
I just did my first project involving soldering using this guide. Thanks for the help!
@LelandHasGames4 жыл бұрын
This is an excellent video and there just isn't enough videos about soldering. I know voultar has quite a lot of content based around soldering and stuff but, he never really goes into detail about all of the little stuff. You nailed this one, dude.
@rhainpaulino51783 жыл бұрын
Please get me a new video end teach me to use soldering iron
@maccmedina13662 жыл бұрын
Very informative, after 4 days of practice I am now able to solder much more efficient as of now. and I enjoy to work that is related to soldering. Thank you so much, Please continue to upload more video such as this or any kinds of project.
@elijahwasmuth71224 жыл бұрын
Also, thanks Wermy for introducing me into this hobby. I saw the minty pi lite and I was really exited to build it! I enjoy watching your videos! Thanks
@alancharles678910 ай бұрын
Oh deep joy! I’m a British bloke 71, so I was tickled that you got the pronunciation of solder out of the way so soon! I have been putting off a crucial job on a model railway I am building because it means soldering. Your crash course was just pure gold, from the blindingly obvious (meaning I didn’t see it) point that you heat both pieces and introduce the solder to the two hot surfaces. I am so fired up now. thank you so much!
@kardoid12349 ай бұрын
I am 43yrs old, and when I was a little kid my dad always had soldering equipment lying around even though he never soldered. I would always try to fix broken remotes or electrical equipment with a lose solder, my mistake always was melting the soldering wire on the tip of the solder iron and dumping a huge drop of solder on to what I was trying to fix…. And now it angers me that no one corrected me and seeing how easy it was.. lol. I could have been a soldering king by now 😂
@joebrackenborough10512 жыл бұрын
Haven’t been soldering properly and now it’s upped my game amazing thank you
@ianmontgomery75342 жыл бұрын
i think a useful addition to this would be tinning the iron tip before actually using it to solder for the first time and re-inforcing tinning after you finish (in a production environment you tin much more often). Also static protection should be mentioned as it is not all that hard to ruin an ic with a static discharge.
@blessingsjoelssen24992 жыл бұрын
You're a lifesaver mate! I had no idea smaller soldering wire existed, yet I've wondered why the new boards always have neatly soldered components, now I Know!
@keningilbert3 жыл бұрын
Wow incredibly beyond helpful video. Cleared up decades of confusion in a few minutes. Thank you. I can’t wait to buy a soldering kit and get started on a couple of projects I’ve been putting off for years because of intimidation.
@tonyenkiducx Жыл бұрын
Thanks for the video. I've not used a soldering iron in 20 years, and with this handy video I did quite a fiddly ESP32 wiring job and it all came out great first time!
@haydenhiggins33124 жыл бұрын
Thanks for the great video. I have been working on a drone project and have a problem with the solder not melting quickly on the motor controller. This video helped
@larryfulton76192 жыл бұрын
I’m 76, haven’t done any soldering since Exploritory Shop in High School…this tutorial is very well done!
@altoidstincan81664 жыл бұрын
I love this channel. I got a soldering iron for my birthday and I love it. Thanks for the new hobby, wermy, and i hope you do well in these trying times.
@mikesantimore69712 жыл бұрын
You explain yourself so well you're a good teacher
@HNXMedia2 жыл бұрын
Hero level video! Exactly what I needed with no BS and a TON of useful information!
@ahmad.mozaffar6 ай бұрын
The best video about the topic: short, clear, organized, and super informative. Thank you so much
@leonardodeluzio4 жыл бұрын
How serendipitous! I just started a null 2 project and was looking for soldering advice. Perfect timing!
@VaskoKasko Жыл бұрын
I'm studying this in highschool right now and this video's been a great help in realising I solder in the incorrect way you described. Thanks for the advice!
@elijahwasmuth71224 жыл бұрын
for those who want to get into it but don't like soldering, I was the same but when I got a minty pi lite kit, I loved it. It may take a few times to get strong connections, but once you do it a few times, you will get the hang of it.
@sethwoodruff34944 ай бұрын
Thank you for adding a leaf to the tree of knowledge. This video has been most helpful.
@ALGH21013 жыл бұрын
I was definitely an “icing squeezer” when I first tried, and was “taught”, to solder. Your definition of the correct way is perfect, and couldn’t be more simple. Yet, it’s misunderstood by so many. And just FYI, your guess for why some people even try to solder that way, is just lack of being taught (or even told) what to do properly. So yes, people that you see do it that way (since I was one of them) do it for the exact reason you wondered why, because we (or I...) just thought that’s what the people who showed me meant, not know that this is not the way to do it, at all. At first I used to wonder how the hell people did it this way, until I found out I was just doing it all wrong.
@bsndragonАй бұрын
This is a great video! I am in need of soldering my expensive headphone wire that broke off from the connection to the driver and I was hoping I can get a good idea of how to do this without feeling like I'm about to cause a fire hazard in my house. Thank you so much for making it accessible and easy to understand even for such noobs like myself. Much appreciated!
@skatersurfersnowboarder35452 жыл бұрын
Would love to see a crash course on Desodering! Seems fairly frequent for repairs or changes to fix old electronics. Seems common to add an extra "solder ball" to prevent static or something similar Btw Thanks! Great starter course
@WickedMuis2 жыл бұрын
What I've learned to use is the desolder pump, look it up. What it basically does is, once you melted the solder you hold it near and you release it, causing it to quickly vacuum away most of the solder. Simple and cheap. There are obivously fancier tools and better tools, like vacuum desolder guns etc.
@BPoweredLove4 ай бұрын
8:55 That middle finger placement under the work area is WILD! Love it. Great video. Thanks!
@thomasgarrisi54796 ай бұрын
In addition to being knowledgeable, you're a good teacher. That's a much rarer skill.
@therealtoast.1 Жыл бұрын
Quick tip: if you are gonna solder something new and the solder is not melting add a bit of new solder and then try to melt it again and it should work :)
@pibbles-a-plenty1105 Жыл бұрын
I've been soldering everything imaginable in electronics from vacuum tube boat anchors to surface mount postage stamps going on 65 years. Your video is an excellent introduction to the art of electronics assembly and wiring. 👍
@blackhawkthepirate4 жыл бұрын
Thanks for sharing your tips! I’m self-taught and definitely missed some of these things while learning.
@infin1ty850 Жыл бұрын
I was taught how to solder copper pipe when I was young and i picked it up for electronics in the last year or two. I still feel like i know nothing, so I absolutely love these types or informational videos.
@jeffreyrodriguez33563 жыл бұрын
My favorite part of this video was that it did not take 45 min to explain.
@petewoodhead522 жыл бұрын
Wow, thank you. I've watched a few shooting videos on KZbin. This was by far the most comprehensive. Much appreciated.
@LoiteringReaper2 жыл бұрын
For 8:30 another method is to use liquid flux to add more fluidity for the solder to melt along with through the hole when heated. Extra tips: 0) Wear eyepro; flying bits from snipping pieces, fumes, general safety. 1) Drag upwards when adequate amount of solder has been melted for a nice cone shape. Using liquid flux helps. 2) After solder has cooled, use a nylon brush plus 99% isopropyl alcohol to clean and shiny the solder. 3) Use the solder to cover the soldering iron tip, and dab into the cleaning container to apply a protective coating to the tip after you're done soldering. 4) Wash hands w/ soap and water every time you're done; don't want an eye infection from rubbing your eyes or face with dirty hands do you? *Correct me if I got anything wrong & I'll edit my comment.
@HFilipinos2 жыл бұрын
Just what I was looking for! Can't get the solder melted when trying to put the wire in (only worked once, and was just thinking about getting some liquid flux). Is this usual or am I doing something wrong?
@tonioclassico2547 Жыл бұрын
Just a beginner here. This video was outstanding and just what I needed to start from. Thank you.
@jameschambers99695 ай бұрын
if 8 year chinese children can do it, so can i
@andrewsha48435 ай бұрын
This gave me confidence
@goodun29744 ай бұрын
I started soldering at about age 10 or 11 and the first thing I remember fixing was changing a filter capacitor and rectifier diode in one of my father's radios. I don't even remember how I knew to do that, perhaps something I learned from reading Popular Electronics magazine.
@genantamtam93644 ай бұрын
Nope, you are wrong
@GlorifiedGremlin4 ай бұрын
They have an unfair advantage with those tiny little fingers
@TronBonneVonne3 ай бұрын
@@goodun2974*soldering
@Moximus356 Жыл бұрын
AWESOME Video! Loved, great pace, speech too, did not put me to sleep like some other ands i really appreciated the sheer objective focused speaking, no fluff.
@Ellipsis115 Жыл бұрын
Notes: 2:56 Don't drip. Heat up both components and use the solder to fuse them together. Dripping will get you a "cold" connection sometimes.
@colenotesthecocoabuttaquee847611 ай бұрын
I freaking love you sis. Thank you for your service in reminding me of a lot of things, teaching me new things & sharing your wisdom.
@akpokemon3 жыл бұрын
I wanted to do a single soldering project and I'm realizing over time (even before finding this video) that i need to keep buying more and more and more stuff ... geez lol
@alcameron60713 жыл бұрын
But once you have all the little trick stuff, it will make your soldering jobs a lot more fun.
@nintds9703 жыл бұрын
Man same i thought i had it all covered but now im over a hundred bucks in tiny pieces of metal
@tvheadcontent2 жыл бұрын
I learned how to solder from a after school program in elementary school. Everything you went over makes sense and I appreciate the help.
@briangoldberg44394 жыл бұрын
tip tinner actually shortens the life of your tips. best method to preserve your tips is to melt a blob of solder onto the tip just as it's cooling down so it covers the tip and forms a blob on the end. when you go to use the tip again it will be perfect.
@tookitogo4 жыл бұрын
Brian Goldberg Yep! The instructions for tip thinner even say to then thoroughly clean the tip after use, then immediately re-tin with solder.
@theimprovisedmanfriends2042 жыл бұрын
I'm still learning to make it turn into blobs, I'm just snapping the solder when I heat it. No blob action whatsoever, doh!
@briangoldberg44392 жыл бұрын
@@theimprovisedmanfriends204 it's all about controlling the heat. turn the iron off and grab the blob just as it's cooling down
@theimprovisedmanfriends2042 жыл бұрын
@@briangoldberg4439 Thanks so much for your reply, it's something I'm really interested in as I enjoying repairing stuff.
@briangoldberg44392 жыл бұрын
@@theimprovisedmanfriends204 sure! good luck
@prerecordedresponse9884 Жыл бұрын
It's so refreshing to find an instructional video with 0 filler, clearly marked chapters, and easy to follow instructions. Thank you for all your effort. Your video helped me a lot!
@UncleZeiv4 жыл бұрын
Just wanted to say that this video is incredibly informative and well made, it deserves many more views! I will now go and attempt my first soldering exercise... :sweat_emoji:
@teabreak4t2 жыл бұрын
Excellent video . This is the best guide I have seen on You tube for beginners trying to learn soldering techniques.
@jeremyklinger26913 ай бұрын
Don't let those people giving you a hard time about how we pronounce solder know about the words "could" or "would," it might break their minds to see a word where the "L" is silent!
@RetroRiders_250R_MagazineАй бұрын
“Caulk” 😂
@OneMic33 ай бұрын
This is really a well detailed video on soldering tips and electronic supplies. Thank god for KZbin.
@FlextheJuvat3 жыл бұрын
How about a video that goes a little more in depth with tip maintenance, flux types & usages?
@capistor13 жыл бұрын
I wanted to say the same. My tips are unusable after one week of soldering.
@billstiles2803 жыл бұрын
Flux is used in for transfer of heat... use it sparingly but just enough. It’s a necessary evil. It leaves a sticky brown mess after soldering that can be cleaned up with 99.9% tech grade isopropyl alcohol and and acid brush after a few cleanings. The 91% from Walgreens works too but it’s whatever is available. Make sure you get under the components you solder. As far as tip maintenance... if the soldering iron is on for a few minutes while you figure out your next move... blob some solder on the tip. Have a “solder dump” (a small metal container with a DAMP paper towel)... when ready to use the iron again, give the iron a small tap into your solder dump OR use a lint free “tech wipe” to lightly brush the excess solder you blobbed on earlier to lightly brush into your solder dump. *recommended because you don’t want molten hot solder flinging all around you. Use a wet sponge to “ thermally shock” your iron and begin to solder by touching a small amount of solder to the side of it and make a solder bridge between the pad, your component and the fresh solder. Your solder joints should look shiny, smooth and concave. Minimal amounts of time should be spent on the board in regards to heat. Flux is key. Cleaning is key. 600 F to install max. 650-700 F to remove
@sujitkumarsingh3200 Жыл бұрын
I have been soldering here and there from when I was 11. But this video taught me new stuffs. Great video.
@Summermail882 жыл бұрын
The "squeezing icing onto a cake" part was the most helpful part of this video....THANK YOU for explaining!!! I couldn't understand what I was doing wrong...(I had watched a couple of other videos, which didnt explain what they were doing really, and I'm like, well that looks easy enough....NOT lol my connections never would.....connect....😂) Im so glad I came across this video!!! FINALLY it all makes sense....yay!!!
@hippynurd4 жыл бұрын
You should only get 63/37 solder, particularly for beginners because it has no plasticy state, its sometimes called eutectic, because it goes straight from liquid to solid and vice versa. 60/40 is close, and will work if you are a little bit more careful, but the easy/best is always going to be 63/37
@VickiBordelon Жыл бұрын
Thank you for walking through the basics!! I was struggling because I didn’t have an understanding of the basics. I successfully made my connection as soon as you explained the heating of both the items I was needing to fuse together!!
@anshulsingh8326 Жыл бұрын
POV: You watched Iron man movie
@habtamusium8646 Жыл бұрын
I happy at this presentation even if I am not good at English but I could listen clearly today. many many thanks .
@gordoncorry38022 жыл бұрын
Great demo mate. This was my only exposure to how to solder and it was enough to have a go and fix my device. Very happy
@tiolion2 жыл бұрын
Thank you so much, I had never done any soldering in my life and with your tutorial I was able to replace the Oscilating Crystal in my original NUS-001 Snes and It's back to working like a charm!
@JaH-qu4yjАй бұрын
I’m learning how to solder in my product design class and I found it really interesting because I had watched my dad do it before and I’ve always wanted to try and thank you for teaching us ❤
@BrentBrewington2 ай бұрын
Super helpful how-to! I’m finally diving in and this is all I’m watching to get started
@Vik1919Ай бұрын
As someone who loves to fix and clean stuff, you have my thanks. I always wanted to learn soldering. I also learned to use Multimeter properly thanks to Engineering Mindset. This skill is a great investment. Not only will I save money, have fun but I'll be able to fix stuff that I couldn't before.
@Snake3692 жыл бұрын
Wow this is EXACTLY the video i've been trying to find to learn how to solder wires to my teensy board. thank you
@evanwalker92982 жыл бұрын
This was very informative for me and I’m confident I can apply it to my needs. I’m not an electronics guy but need soldering skills for my hobby of restoring old motorcycles that use vintage ignition magneto systems with breaker points. Soldering is needed when replacing components like breaker points, condenser and/or source coil. Not a big deal compared to your electronics work here but I plan to do lots of them and want to perform quality soldering work. Thanks.
@ZeroReign2 жыл бұрын
This is a great introductory video to soldering and exactly what I needed getting into the hoby. Thank you for the crash course
@Franita012 жыл бұрын
WoW! I actually stumbled on this video. it's like finding gold on a walk to the park, your explanations are clear and precise and totally easy to understand. wish I had discovered you 12 months ago . Thank you
@s-volt98142 жыл бұрын
Best soldering video on youtube hand down. THAAAANKS!
@jmehastings13 Жыл бұрын
Great video. You really broke it down for a newbie and took away a lot of the anxiety I have regarding soldering. Thanks
@austin99299 Жыл бұрын
Thank you. Excellent coverage. As a beginner, I feel much more equipped to get started. Also, your comment about not approaching it like cake icing is priceless.
@miguelguerreiro5280 Жыл бұрын
I have been doing cold soldering for a couple years, and now I get why! Thanks!
@Laner72 жыл бұрын
thanks so much, ive been wanting to learn for literally years
@samrodshenassa31062 жыл бұрын
Wow, short, comprehensive, and to the point. I've been soldering all my life the wrong way. You nailed all my questions. And thank you for the flux demonstration on the raw wires. Turns out, I've been doing it all wrong all along.
@livetohash61527 ай бұрын
I watched this and a few other vids, n went from bird poop all over my boards to beautiful points in a few days. ... Thx so much! I still use flux on all my joins, n just spray it off after. Keeping my tip clean was NEVER a thought, but now I'm Capt Clean after every touch 🎉🎉 I even go as far as to mark my solder roll every 5mm with a sharpie to be sure I don't just feed it in like a madman 😂
@cosmicbrambleclawv25 ай бұрын
Just did my first solder project today with no experience and not having bothered to refresh myself on youtube videos 😂 surprisingly it went perfectly 💜 Definitely watching this fully after a good sleep though :)