Solera RV Slide Out Awning Fabric Replacements and Other Secrets

[@divadyrdnal]

Ha, difference between a pro and me... you just pulled the cotter pin! I slowly rolled mine back in like my life was on the line! I got it done but the difference in confidence and knowledge is striking.

[@AZExpert]

Nice!!

[@frankshiffer588]

I've watched a few others who removed the tube and then fought with it to put it on the coach rail. I'm doing both of mine, like your method. Thanks for your videos, James.

[@AZExpert]

Thanks for watching!

[@tommytmt]

Did anyone else laugh when he opened the box of the wrong color and the crowd booed? I also loved his forced smile of pain right after haha.

[@chrisj118]

Replacing my rear slide topper today after work following these instruction. Looks simple enough, thank you for taking the time to make this video!

[@sqqqrly]

Another outstanding video. I have to do this to my class A and was worried it would be $$$$. I can do this myself for only $$.

[@coreymerritt7742]

That was nice and slick the way you did that every other video I’ve watched everyone pulls the tube off the trailer or coach 😊

[@AZExpert]

I used to do that too

[@douglasbrinkley5436]

I have the exact coach and need to replace the slide toppers. Thanks

[@garyag45]

Again good info, thanks. I won’t DIY most things I watch you folks do, but I really enjoy your videos.😎🦌👍

[@AZExpert]

thanks for watching!

[@badgerpa9]

Thanks for the education again. You really wanted to pull all of the wrong sealant off didn't you? lol Stay safe and healthy Sir.

[@AZExpert]

I did

[@addidasnwc]

Thank you, I appreciate your efforts in help us do- it ourselves.

[@AZExpert]

You're welcome

[@rickl6697]

Thanks James, great video as usual. I've got two of those on our Newmar which will probably need doing in a couple of more years. Thats the easiest looking way of doing that job I've seen yet. Our longest topper is only 12 ft. When it rains, I temporarily lower the jacks on the front or back just enough to pitch it which way I want the water to go.

[@AZExpert]

Thanks for the tip

[@philw7174]

Good things to know. Thanks James. Happy trails!

[@AZExpert]

Any time! Thanks Phil!

[@talaven]

Great video. Thank you so much. This is exactly what I needed to replace the fabric on a 15' awning topper.

[@AZExpert]

Awesome!

[@hcrffi]

👍 Great job as usual. As far as the water leak? Of course it doesn't leak. You fixed it and is better than new. Good example is the rear cap seal.

[@AZExpert]

Thanks 👍I never trust RVs to stay fixed.

[@NigelM18]

So cool, I just ordered a box. 50 ft, what a great deal!! Thanks.

[@AZExpert]

youre' welcome

[@LayloNewt]

You make things look so easy

[@AZExpert]

I appreciate that, but don't forget I did put the fabric on wrong so....

[@Tony_in_AZ]

Cool vid James. Timely too. We may purchase a 2016 toy hauler soon. No slide toppers on it. Some roof repair inspection I may have you address this fall (october or so). thanks

[@AZExpert]

Right on!

[@c.l.mcintosh624]

Thank you I bought one from your link

[@AZExpert]

Hope you like it!

[@AZExpert]

Just check the COLOR!!!

[@robertgass2505]

Well Thanks! I learned a thing or two from this video.

[@AZExpert]

Glad to hear it!

[@lauriewhittle3452]

Hi AZ. A week or so ago, I saw a video with you and a vendor talking about some new slideout awnings that are made from aluminum and it slides along the slideout and pushes all the leaves and stuff off the slideout. No rollers. I can't find that video anywhere so was wondering if you could share it. I have a friend interested in this new technology for his sliders. Thank you. Laurie

[@AZExpert]

kzbin.info/www/bejne/bmHSXmOtepaeqJo Topless Toppers

[@3740westmichigan]

Always a great job !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@AZExpert]

thank you!!

[@advancedbuildingsolutions9170]

Do you have any suggestion what to do when spring uncoiled? Thank you!

[@AZExpert]

I have videos detailing it

[@michaelstewart8143]

Like the heads up speed display on the highway. How many shops are in Phoenix area that handle RV parks and such?

[@AZExpert]

Phoenix is a huge RV market due to winter visitors and national parks. There are so many shops and parks.

[@brianbiggs3484]

Great video James !!! Thank you ✌️✌️🇨🇦👍🇨🇦👍🇨🇦✌️

[@BonFShaw]

My '09 Carefree toppers have articulated aluminum support arms underneath the toppers to minimize sag and they seem to work quite well. I don't think they're available any longer and I don't know why.

[@AZExpert]

there are similar ones, but those are difficult to repair and can bind up over time.

[@HappyQuailsLC]

Is there a way to safely treat with a good UV protectant whennewly replaced?

[@AZExpert]

UV protector amzn.to/3cTCxwP

[@joelshaw1961]

Do you replace the masking tape on the roll?

[@AZExpert]

no, that tape was for during when they're built at the Dometic factory to keep the fabric centered during the manufacturing process.

[@troynoall793]

What type of sealant would you use on a rubber roof? I need to seal some cracks that water has gotten in. If you can recommend one of your videos..I would appreciate it.

[@mrsmith324]

Cool video. Ok then what type of sealant do you use on a TPO white all the way through. No felt back or anything. Thank you. MrSmith

[@AZExpert]

dicor, xtrm, alpha, sikaflex self leveling

[@mrsmith324]

@@AZExpert thank you.

[@donspoor8367]

Can you walk on most slide out rooms? If so what would be the weight limit.

[@AZExpert]

most of them yes, not jump but step lightly

[@sergepoirier2665]

I’m curious as to why you don’t like the big one side slide Is it because of the middle pooling issue you mentioned Or they give more grief than you like mechanically

[@AZExpert]

mostly grief, there are three motors that are synced together so manual operation is very difficult which is the best selling point on an electric slide out compared to hydraulic

[@JosephPetersonSD]

How do you properly re-tension the bar if the fabric completely broke and the bar totally unwound?

[@AZExpert]

I have a bunch of videos on this but I don't recommend doing it yourself, risk of injury is great

[@JosephPetersonSD]

@@AZExpert I get the danger. Just trying to figure out how many turns. I’ve tensioned garage door springs.

[@tyflesh]

Another great video thank you sir! I did notice the seal didn't look to healthy on the rear cap seal so you'll probably be getting a call for a reseal job in the near future! Hope you had a great 4th...

[@AZExpert]

Thanks!

[@sailorjohnboy2325]

New Channel name suggestion, AZ Awning Expert! Bawahaha! Thanks for sharing the tips and tricks. 👍

[@AZExpert]

its funny because I don't usually do awnings very often as there are specialized companies in my area just doing awnings. But somehow I make a video about them.

[@AndrewsRChelis]

I would like to be able to buy the torsion springs only from dometic.

[@Reaglesracing44_]

my work is just down the other side of main st by the diving lady motel

[@AZExpert]

luxury?

[@Reaglesracing44_]

@@AZExpert yep 👍

[@jamespinkerman5046]

love your videos , what is the best fabric to use when replacing a slide topper ? thanks

[@AZExpert]

Slide topper fabric. lol. They come premade

[@jamespinkerman5046]

@@AZExpert Thanks , I thought that there was different grades of fabrics for toppers and awnings .

[@jamespinkerman5046]

@@AZExpert I found a 50' roll for $150.00 make your own is cheapest way to go . thanks

[@jameskrivitsky9715]

Have you ever seen the short edges sonic welded to strengthen the sides and prevent tearing during unexpected wind gusts ? Any way to weld the edges at home or place reinforcement tape for longevity ? JwgK

[@dennisbutler349]

May I ask what kind of battery powered drill you use and if you would recommend it or something else? Thank you.

[@AZExpert]

I use a very old and outdated Craftsman Nextec. I have a complete Milwaukee set, I just have the feel of the Craftsman from almost 13 years of use so I prefer it until they finally die.

[@dennisbutler349]

AZ Expert Thank you. My old B&D just died and noticed just what you said. The way you wield it around that drill seems like an extension of your hand, but I thought it looked like a Milwaukee. I think I’m getting a 20v Dewalt for Father’s Day in a packaged deal with a drill/driver & impact driver. Thanks again!

[@tikkitutu101]

Great tutorial.

[@danmadden1080]

Great info - thanks James !

[@AZExpert]

Thanks!

[@robertburgess6100]

Great work as always!

[@AZExpert]

Thanks

[@pauljordan756]

Great info as always. Did you sonic weld the inserts into the fabric? Thanks for sharing your insights!

[@AZExpert]

no, thats how it arrives in the box

[@TerrydeAlaska]

Will AIM wholesales sell to the general public without an account?

[@AZExpert]

no it's wholesale only

[@NigelM18]

Use his link, buy it from Amazon. Easy and cheap.

[@Brian-os9qj]

Pays in the shade, thx man

[@billcullifer]

Great video, thank you

[@AZExpert]

Glad you liked it!

[@TJ-qz6hr]

9:35 That look you make when they give you the wrong parts.

[@AZExpert]

lol

[@TomSpurlock]

Nice tutorial. You've convinced me to NEVER buy an RV with a long slide.

[@AZExpert]

LOL, if you don't need the space...

[@Yukonjackman1]

What about putting a few beach ball there up

[@AZExpert]

it will work just don't forget them

[@KevinCoop1]

Thanks James!

[@AZExpert]

you're welcome

[@TheBandit7613]

Wind, YUK! Been so windy this year. I hate wind.

[@AZExpert]

It's the worst

[@pguy9852]

how do I schedule work with you?

[@bimmerboard]

I added the Lippert Solera slide toppers to my fifth wheel slideouts, but the fabric didn’t last two years. It totally disintegrated and fell apart on all three units that I installed. I’ve only put about 2,000 miles on the RV in those two years, so they weren’t abused. I just can’t believe the poor quality vinyl fabric the Solera units supplied. My regular awning fabric has lasted 18 years and is still going strong. I expected more than a lousy two years from the Soleras. Has anyone else experienced such problems with the Solera fabric?

[@ronniecardy]

Cool fix

[@AZExpert]

thanks

[@kipcarroll5644]

Very helpful. Tyvm

[@AZExpert]

Glad it was helpful!

[@DonniePhipps]

Good job!!

[@AZExpert]

thanks

[@mattmeyer6471]

so do you not like dicore?

[@AZExpert]

In the right application. Winnebago is the wrong application due to the silicone sealant they use.

[@tomallen1725]

Why black, instead of white? I would think white would be cooler.

[@AZExpert]

it's a full body paint job and white would look weird

[@SpykersB]

I was gonna ask the same thing, lol. So then, I guess to be expecting to see white on these new 5th wheels, since manufacturer’s are going back to white bodies, non- body paint. Cheers 🍻

[@frankmitzen2008]

The transition strip looks to need some dicor on the corner

[@papajoej]

That looked easy enough.I'm quite sure it wouldn't go as well for me(LOL)

[@AZExpert]

well it didn't go great for me either :)

[@rtjautomotive]

Doesn’t matter where you put the screws. Never fails something happen s and they magically disappear

[@AZExpert]

yes, and I find them with my tires.

[@hillbillyrv]

You make mistakes too? I thought it was just me.....ha ha

[@AZExpert]

only constantly, it seems to me RV tech work is 99% hiding your mistakes. :)

[@hillbillyrv]

@@AZExpert lol

[@strangecraft5861]

First

[@AZExpert]

very quick

[@mandtgrant]

Please don't do those stupid thumbnails. I like your videos, but I won't watch any with those stupid thumbnails. I don't think 15 year olds watch these anyway.

[@AZExpert]

I like them.