SolidCAM Tutorial Video3 (Defining new CAM part using coordinate system and stock material. )

[@neatpleats11]

Seriously, These 3 video's were the first time someone explained how Solidcam works. PLEASE do more. I have been struggling with this software and you are great speaker/teacher. I need to know how to set up a brand new machine that I built, need to go over the gpp and other text files to be able to edit the gcode if needed. I feel like you would be good at teaching us those kind of things. Please come back!

[@MajorTom97]

true story... all others are incomplete

[@CpcBob]

+1 plan and manage a second operation in SolidWorks to do second side.. adding vise would be great..

[@mukundmestry6093]

Seriously These 3 videos are awesome to start with Thank You very much sir.

[@Tool1717]

@CpcBob Thanks for the feed back. I will continue with the video series. Currently we have new employee in our Pennsylvania office producing videos. We are also moving into a new building where we will have a recording studio (dedicate room) for making videos where all the equipment is in one place. Once set up I plan on creating more of these types of videos.

[@Tool1717]

@JonBanquer Thanks Jon, I was actually thinking of going back into SolidWorks and adding a vice from the Kurt website. Then I was planning to make a configuration with the vice holding the part for the 2nd operation on the backside. I see a lot of people migrating from 2D oriented CAM systems. Knowing how to do some basic SolidWorks functions can really aid in preparing the part for applying tool paths.

[@chomsy8]

This would be the best tutorial series for solidcam but it is a shame not to continue the series.

[@MiguelZurek]

hey how do i instal solidcam into my solidworcks softiwere?

[@ranjodhsingh8638]

Where is 4th part dear ?

[@PARAMETROdotORG]

Indeed matrix49A. If you're planning to release a new video, PLEASE go straight to the point.

[@forureyesonly]

Hello there, I found you video very useful. I only see up to Video 3, what happened to the rest of the modules?

[@sulhilchaplion8447]

your video is amazing, one of the best tutorial videos i have seen , actually, i need to develop the CNC codes for a part, and i am totally depending on ur video

[@lijusuresh203]

sulhil chaplion Poda myre

[@Aelevant]

where is video 4? come on now, watched all three and there is no 4th one, which is the most important part.

[@leandromunizgoncalves2228]

Please, Send more video.

[@hiteshchaudhary5676]

Why you stoped making serese you were doing awsome please start again you can do better than this mate...

[@sulhilchaplion8447]

eagerly waiting for ur next video

[@lijusuresh203]

sulhil chaplion Poda oomba

[@killahound6545]

You don't explain how to actually use the software as it was intended and expected. Thank you for this huge waste of time.