Innova Systems is an authorised Value Added Reseller for SolidWorks 3D design software. Call us on 01223 200690. www.innova-systems.co.uk
Пікірлер: 47
@velcro82992 ай бұрын
In my opinion, this is the most professional solidworks tutorial I've seen on KZbin aside another channel. I like how you explain the rational behind every step that is taken.
@thedevo0110 жыл бұрын
Very well explained, and straight forward tutorial. Clear as a whistle. Thank you very much for doing this!
@primeral7 жыл бұрын
I always come back to this video. Thank you.
@jamessbca6 жыл бұрын
Nicely Done. Thank you sir!!! (20 year solidworks user hear - still learning new tricks every day thanks to great videos like this!)
@petiegoodman46477 жыл бұрын
Genuinely appreciate these videos. I learn more from 30 minutes of video than in an entire semester of class.
@bogdanpali6 жыл бұрын
Our teacher put this tutorial in class. I think it is better this way, because we can see the exact steps
@drew488459 жыл бұрын
Great video. Very useful to see a variety of tools being applied rather than a 30 minute video about the extrude-cut feature, or something.
@PeterDiCapua10 жыл бұрын
Thank you for this video. The intersect feature really helped me out.
@karstenstigmezinirasmussen77863 жыл бұрын
Brilliant stuff, thank you very much indeed, Adam. This along with your mouse modelling video is so much better than the official SW surfacing course. There are so many details to learn from.
@ashveentube7 жыл бұрын
Thanks mate. Really helped me a lot
@alfredopollock686210 жыл бұрын
very good vid mate. Thanks it helps a lot.
@petehamilton54759 жыл бұрын
Thank you. Excellent video. Very useful info clearly presented
@shaunwiles928210 жыл бұрын
Nice video. I may have to watch it again though.
@mohamadyakteen87109 жыл бұрын
Very useful, thank you..
@connormoelmann64297 жыл бұрын
Thank you!
@hairedesigned38333 жыл бұрын
Excellent tutorial. Very well done. Thank you.
@muhammadharis83134 жыл бұрын
I wach many videos but your method is very nice thanks for sharing your experience
@patrickschloth16217 жыл бұрын
great tutorial!
@madcadskills9 жыл бұрын
Lot of useful skills here
@finnosweey7 жыл бұрын
Really helpfull thanks, this might have just saved my ass
@vladimirb30496 жыл бұрын
Good lesson for new students.
@john_p10 жыл бұрын
on that top plane trimming sketch at 10:19 if you wanted a flat section in the middle with splines that were nicely tangent to the flat face how would you do that? so that the loft builds smoothly off it.... every different way i attempt it i get errors and objections, its driving me nuts
@hibiscusflower591110 жыл бұрын
I'm back!!! When do you cut a surface with a solid?
@michaelmeisman47317 жыл бұрын
How about using a point cloud from a FARO laser scanner and creating a surface?
@TheFreestylevids6 жыл бұрын
Dankjewel
@IsaacJackiw9 жыл бұрын
If you finish your model, and then decide you want to change the overall size, is there a way to do that? Can you reset the size of that line you put in early on to rescale the entire model, or does that line only affect the sketch pictures?
@ashimgiyanani4 жыл бұрын
For my intersection as in the video, I perform the same actions as you. However, I am only able to get the small intersection area corresponding to the surface revolve even if I exclude the small intersection area. Can anyone please tell me how can I get the solid body at the end excluding the small intersection?
@pardhumandava Жыл бұрын
nice! Thank you!
@semihaksoy81825 жыл бұрын
Sir, what is the differences between surface modeling, solid modeling and sheet modeling? Please answer. Thanks in advance
@sarthak0diwan8 жыл бұрын
very useful
@harshalpatel6255 Жыл бұрын
WORKING thx bro
@shreypareek199110 жыл бұрын
Excellent tutorial. Can you also do a car modeling tutorial please.
@NikhilSharma-nz2qd5 жыл бұрын
please upload the link download for the photo
@drew488459 жыл бұрын
You could have used the scale tool on the ruler, seeing as it's unequivocally correct.
@rohanmistery6249 Жыл бұрын
Thankyou Sir 😊
@NikhilSharma-nz2qd5 жыл бұрын
please provide download link for images
@hibiscusflower591110 жыл бұрын
At what time did you make it into a solid body? (so that you could shell)
@sarthak0diwan8 жыл бұрын
+Zoe Doucette i have the same question
@nunyabizniss69348 жыл бұрын
Intersect makes it solid.
@MonkeyDLuffy-ef2yh5 жыл бұрын
When you have fully finished the surface modeling for one half of the part. That way all you have left to do is shell the half and then mirror it - giving you the completed part
@mehrdadfarimani18328 жыл бұрын
nice
@VADIMAKE4 жыл бұрын
Can you upload images?
@nhantrong86083 жыл бұрын
How copy 14:45''? Can you explain?
@sectoronetwothree4 жыл бұрын
Why use deform tool and just include that initially?
@noch838 жыл бұрын
You could have used some transparency on those images
@williamusher10 жыл бұрын
It's ping not PNG
@NikhilSharma-nz2qd5 жыл бұрын
ping format must be invented by your dad. because your dad creates generally useless things.. its PNG.