SolidWorks Tutorial # 251: differential gearbox (Project 12)

[@kilianochs6994]

This is a great tutorial, I learned a lot. Especially I like the trick of saving an assembly as SolidPart to get a solid body of the model. However, what's bummer is the fact that the gears don't actally fit into each other precisely: the teeth collide (intersect). It would have been interesting to see how to design them so that they really match with each other.

[@daddycall4025]

I LOVE YOUR DESIGN LIBRARY

[@SromBlessed]

Great assembly. However, gears do not work properly. Teeth are interfering with each other

[@timecop1983Two]

Pro. Bravo! I wach All your videos! 👏

[@믿음소망사랑-d6i]

기계원리가 대단하십니다

[@projectiocon]

37:42

[@engmahmoud5008]

we need to hear the voice

[@ericksarmientoesteban6736]

you could pass the assembly plan so I can practice the interpretation of plans and do it myself in soliworks I would appreciate it very much. SUBSCRIBED

[@abcdefghijklmopqrstuvw4071]

Ratio wheel to pinion in the gear set is about 1.5 (For example 10 teeth for pinions and 15 teeth for wheels) In a gear set for heavy loads in trucks you need 4 pinions and teeth number in wheels are even like 16 or 18. So it is only an example in some points far away from real parts. But very nice example to do this parts for own constructions.

[@Roman-nh3kq]

Hi, thanks for your lessons! How to identify the distance between the gears?

[@hoanghathanh2502]

Cmon people. They just make a tutorial about using SW. I know the gear system won't work as a differential gearbox, just because of missing some gears (not because of the number of teeth or interfering or anything else...). The mechanical or physical is not the importance thing here.

[@CADTUTORIALmax]

Excellent, good tutorial video!

[@kumaranothayoth4932]

Excellent

[@prateekrai5469]

Awesome sir your all vedio teaches us very much...

[@TeamChickenHearts1]

So interesting movie!! Thanks a lot!!!!

[@Davee80s]

amazing

[@admtema]

Great work, but some parts of video, important to your viewers, are cutted off. It is very hard to study with missed little parts.

[@sureshjadhav9253]

Great modeling

[@omrimoshel6823]

hi, is it possible to get the blueprint of this deferential ? it could really help me in my project thanks!

[@tb-gn6ci]

i dont think the gear system will work with that modules center distance and number of teeth

[@thesakshyamrai]

U shud know solid works creates only simulations

[@КрасимирДимитров-щ9м]

It is not very difficult, to create correctly model in solidWorks. With bevel gear too.

[@КрасимирДимитров-щ9м]

needs of bearings

[@rajnishkantdas1279]

the great sw i have need a great job..

[@yazidmahroug1958]

you could pass the assembly plan so I can practice the interpretation of plans I would appreciate it very much. SUBSCRIBED

[@igorvanko1994]

спасибо :)

[@albertotti1093]

great work! Thanks!!!!

[@vuongquoc1981]

I don't understand what u do like at 7:45, u use the cut-extrude to cut the leftover circles but i dont know how to do it, u just click cut-extrude and then click on cirpattern1. And in the final assembly, at 57:00 when u assemble the shaft with the gear, i guess u can mate the shaft keygroove with the gear keyway 1st and then u can concentric, it's easier than u mate the keyway and keygroove after u concentric (just my idea), anyway, great vids, just need the voice

[@arturosototorres1721]

Good job !!

[@tialovevegasrarivoarison2070]

Hello, Can anybody explain to me how this kind of differential works?

[@yasinaksoy9638]

thank you

[@hAvv0kk635]

I dont understand what you did at 2:27 what part is that and why don't you show how it was made?

[@anjaneyakudale6685]

Can you please tell me the exact names of each part? I have to put these names in my portfolio. Thanks in advance.

[@RomanPerfme]

làm thế nào để hiện 2 thanh công cụ 2 bên vậy admin

[@Tech-nk6xw]

sir pls es video me voice ka v use kare pls. and mind blowing differential gearbox video

[@furkantoruntay2766]

kraaal biliyorsun bu işi , you know it

[@yavuzselimaydn1904]

:DDDD

[@Proximality]

Can you put it up for download? P.S I've drawn many engine components thanks to your tutorials, keep up the good work!

[@dedeufilho1]

How we can assemble the V6 engine with this differential gear box and camshaft unit and clutch ?

[@samsudinaliakbar7983]

Left right gear or 12 gear teeth in your tutorial, I tried it in Solidworks, my gear doestn't change shape,why?

[@mahfoudbabaali3379]

Sir, it's a great work, please just one question: could you tell me this differential of which vehicle? Or more than that, what is its Reference?

[@mrajsma01]

Its made up, this would never work in real life.

[@anishs9416]

What did he do at 7:50. How was the cut excluded from circular pattern?

[@thomasditsas976]

He just re positioned the cut after the circular pattern and the little obstacles where also cut. 5 years after! LOL!

[@pranavsawant5560]

Can i get the detailed drawing of all the sub parts

[@doomslayer6918]

Hi. Where you take dimensions?

[@musabkaboush9122]

What about manual transmission gear box , with different speeds

[@omkarnade8024]

how did he change the line command to arc command without clicking any option in the sketch toolbar? @ 0:57 time

[@vipul55dave]

when u have made that line, just go to the end point of that line and automatically it will convert to arc.

[@alexisteresogonzalez6591]

What type of differential is it and what are its specific measurements?

[@khaikazama491]

how many parts are there?

[@gokhanelmas6265]

Do you open realview ? Because I opened but this view not equal your part view

[@mahdidanandeh4600]

hi, what is version of the solidworks?is it 2012?

[@romlef526]

merci

[@josemariatorresvillarreal2783]

The dimensions with which they model the differential are real measures?

[@fahad102011]

nice tutorial. bro i couldn't find iso power transmission in my design library. i am using solid works 2010

[@ben.e__9]

Hi, how do you find the 'Fit Spline' function?

[@STEROIDZZZZZZ]

Goto "TOOLS" then "SPLINE TOOLS" then "FIT SPLINE"

[@harwellmejia6465]

I wonder why the "combine" comand does not work T.T

[@aldocastillo1194]

The dimensioning of part 3 is totally incorrect !

[@sully2695]

Hi. Have a question.For this view quality need a pro video card?

[@justin60222]

Would that actually work? What is the purpose of the black part with the very large teeth?

[@brainvoicebyvishalkumar6212]

Hello, The toolbox not Configuring in my SolidWorks. I'm trying to add the toolbox but it shows "failed to create". Can you please help me with this?

[@mendezcansecoernesto1267]

hello excuse me, do you have the measurement drawings?

[@Eng-MJasim]

Where can we find a gearbox sketch with dimensions? best regards

[@Sw-tcNet]

Only in this tutorial!

[@CllAslnr]

Wonderfull

[@adrianhs6839]

Dónde puedo conseguir los planos ???

[@ddn6146]

Where are from do you take dimensions?

[@shivkumarcp]

How to get dimensions of the gear from net

[@DTYD]

sir can i get this model in dwg format

[@MostafaMahmoud-wz6gx]

?Hi what is your VGA card you are using

[@denverdacuag8632]

Do you have a isometric picture of this ?

[@leandrojr.picson58]

@ first 8 seconds the right side gear I think is turning the other way..cant you see it?

[@saidi2601]

Great Job .BUT I DON'T THINK tHIS IS A Differential at all even if it looks like a Dif.... where is its entry and exit .!!!!

[@daxterv1461]

35:02 that part doesn't work but u just skipped that part

[@johnfeldhausen5576]

what level of a computer do I need for the graphics to be up to this level?

[@JoseCarlos-zb9di]

If you have a professional card homologated by Solidworks, the function Real View, has already been activated into the software. You can activate Solid View Real View manually, even if your graphics card is not professional, and the graphics of the model will improve greatly, but will never have the quality of a professional board.

[@al-ibntasin202]

where can i find the dimensions

[@eduardopochpinto8438]

gear module must be the same!!!!!

[@shapuyzat]

is youtube ask about your solidworks lisensed so you can put advertisement on your videos.

[@3dtime3d85]

Question: How will be inserted "straight miter gear_iso" to "Part1"?

[@junqima5127]

You skipped some steps where you changed features of some extrusions and these steps would lead to error

[@kilianochs6994]

Nope, it worked for me

[@kailashsingh9737]

Very beautiful sweet sir hi good morning ji

[@Psvltt]

Hi channel , I want to download 2D sketches to practice , please show me how to do . thanks very much

[@Maconhaepaz]

Me too

[@siddharthpatel2961]

Voice kidhar hai,Designing and Assembling is good par editing to sahi se kar lete,Video cut rahi hai to function samaj hi nahi aa rahe...

[@TheZzdanielzZ]

7:45 a 7:53 ???

[@Malte-cv9wu]

i like the looks of it, but that aint no differential at all, the two smaller axles are supposed to turn the same way, not the opposite directions

[@mohammadilhamaziz7855]

i work in inventor, i need blueprint

[@mattgraham5050]

some parts are under dimensioned

[@philipyerima9168]

so it is true then best couch is not best player

[@riohieu]

This design did not use any bearings. That why, it is a wrong design.

[@xBlackThoughts]

Why do you have so much cuts in your Videos??? If it weren't for these cuts, your videos would be super awesome......

[@fredmila]

I cannot watch instruction videos without voice and annoying music (OK, you can switch off the music). Within the first 5 minutes I lose concentration and within 5 minutes I am sleepy.

[@jyotiranjansahoo7316]

Gears are not meshing properly

[@KumarHemjeet]

Try changing no of teeth,module and center distance.

[@satheeshs1150]

See drawing pl

[@furkantoruntay2766]

gears is wrong ! this is a big problem for analysis