SOLIDWORKS Tutorial "Mold Design" (10/10)

[@ladyakuno7488]

You saved the day. I have an instructor (I use the word loosely) assigning projects in sw but we were never taught to use it, only inventor. This one in particular is pretty difficult for us noobs. Someone in class found your video. It's excellent. Great views, explanations, the step by step was perfect. Can't thank you enough. :)

[@EvgeniKuperkhand]

Thank you very much. Very good job. Great !!!!

[@escaleetor]

Thank you so much Sir! This video made it a lot easier for me since I'm not really a fan of SolidWorks Tutorials! HAVE A NICE DAY!

[@yanirdahari569]

thank you so much

[@kandasamyrajan]

Thank you very much, it made my life easy, otherwise I will have to go through the solidworks built in tutorial step by step to understand the subject which I hate.

[@madeinhome3005]

nice video.easy to understand making of mold design.

[@glintongfernandez1845]

i am getting redundant loops error while creating shutoff surfaces in this exercise, any solution? After having a look at it i figured in mine i had two circular edges highlighted for each button why is it?

[@MadhangowdaS]

draft is showing error ( the edges are in red ,what to do)

[@noadsmusic7370]

thank you

[@lissethkatherineramirezant4585]

I have an error when adding the shut-off surface some of the loops appear redundant. who can I fix it?

[@randominternetguy3537]

hi, my model did not automatically select the correct loops (it selected some redundant and contact loops) do you know whether it could be one of the settings in solidworks that makes it do that. i have repeated this tutorial several times in order to make sure i have not missed/did any steps incorrectly.

[@vatsal1857]

hey i had the same issue...did you found any solution for that?

[@randominternetguy3537]

@@vatsal1857 yea, when selecting the splitting line, it chooses the wrong one, you have to select the line that connects the 2 perpendicularly aligned faces.

[@vatsal1857]

@@randominternetguy3537 thanks man it worked out for me

[@glintongfernandez1845]

@@randominternetguy3537 should we do it manually or is there something i should correct so that the software selects the correct one automatically

[@randominternetguy3537]

@@glintongfernandez1845 no clue. It was just a fix I found for a class I took in hs. We went to use a different program the next year. It was garbage imo. It was more efficient but much more difficult to use and mess around in. I gave up, failed the class, and barely got my pos paper for graduating a POS hs.

[@MrTorres904]

Still helpful to this day

[@imanyounesi183]

perfect

[@mirasrafalironok9133]

Where are other previous 9 Tutorials? I couldn't find it.

[@Ines_Slimani]

hi, did you find the previous 9 tutorials? i'm looking for them also

[@abdullahcelikkkk]

@@Ines_Slimani A little bit of trying and here is kzbin.info/www/bejne/pnnWp4mtqbOKpNU

[@inesslimani4634]

@@abdullahcelikkkk I'm thanking you

[@abdullahcelikkkk]

@@inesslimani4634 not at all

[@DASISolutions]

@@abdullahcelikkkk Just to be clear, there aren't nine other tutorials all related to Mold Design in this series. This tutorial is the last part of a top ten tutorial list here: www.goengineer.com/2019/12/31/top-ten-solidworks-tutorials-on-youtube/goengineer-2/quick-tips/ Hope that helps!

[@humbletotodile]

I still have no idea what the fuck point you clicked for creating a plane to mirror the parts