Ultimate SolidWorks Tutorial 2021 for Beginners (In depth explanation) Part 3

[@with-Aryan]

*Watch the Full in-detail video here* bit.ly/SCPMiniSeries

[@anantgupta9406]

Really very good video...i learn solidworks from videos from various sources but ur video really help me to learn basics which i haven't seen anywhere on KZbin.Videos of goengineer and solidworks r of very high level which barely helps me in preventing basic mistakes.Thanks👍

[@with-Aryan]

@@anantgupta9406 Because I have been tailor fitting my content for absolute beginners for the past 12 years. About to relase the 4th episode but if you don't want to wait the whole thing is already on my website. just go and watch them now bit.ly/SCPMiniSeries

[@anirudhkumar5532]

@@with-Aryan I am unable to access the webinar through this link all that is shown on my screen is a blank page and thanks I really learned a lot from your videos

[@with-Aryan]

@@anirudhkumar5532 courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA

[@travisw9071]

@@with-Aryan hmmm

[@CuriouslyConstructive]

Love that you stress the sequencing of desinging in Solidworks. As a self taught designer it took me a couple years to really grasp the importance of proper sequencing on the build tree for complex designs. Wish i would have found you 8 years ago, lol

[@with-Aryan]

introduce me to those whom you care for

[@AbhishekKumar-pf9zf]

@@with-Aryan sir , when I am designing this hammer only,after the section view while drawing that rectangular part.that rectangular part isn't drawn in the cavity part and it gets drawn on one of the backward face of the sectioned view. Even if my origin is at the centre of the circular cavity

[@TechieTard]

1 week ago, I bought solid works, found your channel, now I'm building hammers. You are a great teacher, I don't doubt I'll be purchasing a course of yours if you have one to purchase.

[@with-Aryan]

Only the best course out there! Link in the description, you’ll appreciate and love my course, go check it out

[@SarahMcQuaide]

Thanks so much for your videos- you're a fantastic teacher. I'm a mechanical engineer brushing up on fundamentals and really appreciate your tutorials.💪

[@with-Aryan]

you're welcome, glad you liked it. Don't forget to check my webinar

[@hibbertadonikam6815]

you're the goat. I learn more in 3 episodes then my entire class last semester.

[@with-Aryan]

haha, that's how I do it. You are welcome

[@David_HX]

Ryan, At 3:30 you select the Right Plane/Front Surface of the "Hammer Head" and describe (and show) getting a Small Orange Arrow to be able to Grab and Drag the Hammer Head left to right while noting the 2.5mm Hole stays in one Place and doesn't move with the body of the Hammer Head because the Sketch is not Fully Defined - I don't get that Small Orange Arrow when I click on the Hammer Head Surface (any of the flat surfaces) What setting needs to be enabled to get that Orange Arrow ?

[@with-Aryan]

Instand 3D on your features tab

[@vc7128]

One of the best training videos series I have ever watched. Very fluid. You are awesome. I will definitely watch the detailed videos on your website. Thank you very much.

[@with-Aryan]

It never gets old to read such good compliments. Thanks

[@tinytuny97]

20:48 It's Mjolnir :D, Thank you very much for these valuable videos🙏

[@shovkatsotivoldiev]

Aryan, you have a talent of teaching. Wish you all the best!

[@MRcrissoldier]

You are a great instructor good Sir! Thanks! I was able to follow and digest your tutorial, the reasons of using all the commands covered since the part 1!

[@with-Aryan]

I'm glad you liked it Phil

[@jmcalales3905]

Thank You for Always Giving Value! I am Super Amazed on How You Explain everything Calm and Collected. More Blessings to your Channel! Looking Forward to Learn More In-Depth until My Goal of Becoming a CSWP!🤗🤗🤗

[@with-Aryan]

you gotta come on board and enroll in my course, otherwise you are missing A LOT! Click on the link and enroll today, trust me on this one

[@mondriaan]

Very clear view on the topic of origin, thank you

[@with-Aryan]

Glad it was helpful!

[@condor1696]

Thank you so much this helped a lot!!!! You saved my life

[@with-Aryan]

Glad it helped!

[@vasanthkumar-iv8qo]

Very Good explanation regarding constrains it is very useful

[@brendanforkan2994]

Brilliant really great presentations thank you.

[@with-Aryan]

Thank you for watching man!

[@khadzh1994]

Yeah definitely your lessons are valuable. I cant say i am that beginner but i am about to chek all of your lessons from the first one till the end , cos i really want to learn it and i really like that software and i would like much more than surface. Your explanations are fully understandable! You are great instructor :) Keep doing it! Greetings!

[@with-Aryan]

Happy to hear that!

[@12823matthewkao]

Great instruction Aryan. I am learning solidworks for bioreactor design.

[@with-Aryan]

Glad to hear that!

[@vininovaski132]

BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)

[@with-Aryan]

Glad to hear it!

[@securehacker1171]

The Best teacher that I have ever seen🥺

[@with-Aryan]

Thank you!

[@sabrynamejri4997]

Thanks a lot for your efforts and I will do my best to keep up

[@with-Aryan]

That’s the spirit

[@nii_055]

So informative, thanks a lot!

[@with-Aryan]

Glad it was helpful!

[@jahanzebali589]

SUPER HELPFUL!

[@with-Aryan]

Glad it was helpful!

[@MarkParks-r8x]

at 6:23 you click on the bottom left hand corner to move the whole rectangle around. When I click on the lower left hand corner I can only move that one point. Why cant I move the whole rectangle?

[@with-Aryan]

because it has dimensions assigned to it. an dthe only parameter left to fuly define it, is the location

[@wahibjavedmusic]

Thank you for this! Super cool video! A+++

[@with-Aryan]

Glad you liked it!

[@franczx437]

Hi Aryan, one question how do you move the cube in the minutes 15:32 - 15:44 i like that smoothness, its possible in all versions?. Everything else is superb.Thank you for all your work.

[@with-Aryan]

with a Enterprise 3DConnexion

[@cjpaish]

Hi Ryan. I do not have the arrow you show at 3:30 and cannot drag my cube. can you tell me what's wrong?

[@with-Aryan]

at the same time frame, look at the menu up there, there is an option called "instant 3D", that must be active so you can do it. If still not possible, let me know so I tell you where the issue can be

[@spazzwazzle]

Good videos and I was able to remake the part in 2 minutes after following slowly the first time. Only thing is that you originally showed a 10"x10" cube with 1" diameter hole and 1" radius edges, but later changed the cube's dimensions to 10mm while keeping the holes and radii in inches. I'm using 2020 solidworks and I'm also getting lost a bit when you're able to define the handle's dimensions to the edge of the hole when it snaps in place; I had to do that manually like you showed in the last video. Did I do something wrong there?

[@with-Aryan]

Thank you for so closely following the instructions. I have to see your part. send it to [e-mail]

[@mattmills1407]

Thank you, you are awesome!

[@tonygombas491]

very informative thank you so much

[@lolooochpubgm7574]

thank you so much dude you're a god

[@with-Aryan]

Thank you for watching man!

[@viralagricultureworks1710]

How to make bucket conveyor assembly with motion?

[@with-Aryan]

what do you mean?

[@siyabulelatshali1012]

Your videos dude 😭😭😭😭. Amazing

[@with-Aryan]

thanks!

[@electroenclosures8947]

Good day i am a beginner on solid works I am still going trough your videos, is it possible for you to do something on a enclosure as I work for a enclosure company

[@with-Aryan]

What’s that

[@Vs12321]

Thanks Aryan! this is very helpful and i found it in the right time. quick question, for some reason I can select orgin point, I can drag the sketch to orgin but can't select it in any other scenario, any idea what can be the cause?

[@with-Aryan]

never faced this scenario. you see the origin but you cannot select it?

[@Vs12321]

@@with-Aryan correct, could be a bug maybe?

[@David_HX]

When trying to follow your steps Ryan I seem to be missing what Plane you are sketching on and my orientation in TriMetric ends up being different - as in: Your extruded example (HammerHead) model is positioned in a view on the Left extruding back (Mid-Plane) to the Right and mine is opposite. Then when I sketch what is to be the Through/both Cut Hole for the handle it is on the side, not the Bottom - Please provide more clarity of what Plane or Surface you are Sketching on so as to be able to follow your example precisely. The confidence gained by seeing my result matching yours can be improved. Otherwise, very clear step-by-step instructions are well followed, and, sometimes experimented with to see what happens "if/when" I try something different depending on what Pop-up options may come up - Still contemplating if I should drop 1K for your full course or not -

[@with-Aryan]

David, send me a screenshot of your issue to [e-mail] I'll have a look

[@David_HX]

@@with-Aryan ==== I'll go through and re-do the Model - Thank you for the fast response Ryan - david

[@David_HX]

​@@with-Aryan ==== Screen Shots and .sldprt file sent

[@with-Aryan]

@@David_HX will check soon

[@angongky5056]

How to reverse engineering in solidwork without feature mesh to surface sir??

[@abhirupdas4637]

HI this is a really cool video, for me when i tried to create the handle there seems to be a gap between the cut extrude and revolve base on one section.. Any tips here

[@with-Aryan]

I just replied back to your email.

[@nasrahmed6236]

You are realy great engineer Thank you so much

[@with-Aryan]

Thank you

[@TheMehryar]

Great video, as always 👍

[@with-Aryan]

Glad you liked it bro

[@binoytk5144]

great videos

[@with-Aryan]

Glad you like them!

[@raveollorza1877]

Worked, thx

[@with-Aryan]

You're welcome!

[@mohammedumar6779]

Great as always 👍👍

[@with-Aryan]

Thank you Mohammed

[@ruangtamadun3958]

Awesome program

[@with-Aryan]

Yes it is

[@Kenneth91619]

Both my sketch with the boss-extrude and the sketch of the circle with the cut extrude are fixed yet when I go and cut my plane in half and select top plane and enable sketch and select corner rectangle it will only attempt to snap to origin point and on my model I don't have a mid point or edge point on the half circle like you snapped your too. This results in my new square being under developed and not fix. I don't understand

[@with-Aryan]

did you try to right click on it and see if you see "select midpoint:"?

[@risyublom8712]

Thanks Aryan! Great video, but I have a question. I was unable to select the red origin and could only select the blue one. When doing this I got an error saying that the program failed to create my fillet. Is there anything that I might be doing wrong here? (I am using the 2022 version of solidworks btw)

[@with-Aryan]

I cannot follow your question. Which part of the video are you trying to replicate and you fail? plz give me the time mark

[@risyublom8712]

@@with-Aryan I followed your instructions at 18:01 but was unable to select the sketch origin. I also received an error about the fillet tool for some reason

[@with-Aryan]

@@risyublom8712 post a loom to your issue here and I'll help you once I see the issue myself community.solidworkstutorials.net/c/helpdesk/

[@munkhbaatarbatbold556]

Thank you.

[@with-Aryan]

You're welcome!

[@coolsuraj026]

sir u dint tell how to make complete sketch symmetric to axis system x and y

[@marinajg3]

Thanks so much

[@with-Aryan]

No problem

[@stanleyfei8045]

You video is very good

[@with-Aryan]

Thank you so much 😀

[@ibraheemkhan9116]

How do you move the screen like that so smoothly?

[@with-Aryan]

With the 3D Connexion Enterprise. I will do a review on it soon

[@sameerk12982]

You can also use shift + arrow keys

[@with-Aryan]

@@sameerk12982 yes you can, that'd give you 90 degrees at a time

[@pramithdesai6535]

Can i access the webinar now I am unable to get any waiting time after i register for webinar

[@with-Aryan]

Yeah of course

[@Bluefox1978]

The hammers name is Mjølner in Danish and Mjólnir in Old Norse

[@Bluefox1978]

Wish you luck trying to pronounce it… 😁

[@MRcrissoldier]

Question: why did you placed the circle in the origin when it is a sin to define the entity in the origin 2. If i remove the relation of the circle and origin, how can I relate the circle to the cube

[@with-Aryan]

wait what? who ever says it's a sin to place your circle on the origin is following a croocked advice! You should do that as a matter of fact. 2- You can select the midpoint on the edges of your cube and assign Vertical/horizontal relation to your circle, but my recommendation is to stick to the origin

[@vasudeokatdare6530]

HOW TO DRAW START-STOP -START LINE BY USING MOUSE ONLY. PLEASE GUIDE !!

[@with-Aryan]

hold right click move it to the left fast

[@veramann]

Even though I have a high resolution computer, I can't see some parts of the screen. Some words are still fuzzy.

[@michaelperkins5619]

Hey man trying my hand at learning and I'm having an issue, I can't get my sketch to link to the origin point, and sometimes when attempting to move my sketch it'll distort it into shapes that are out of alignment with what I'm trying to accomplish. any tips would be great!

[@with-Aryan]

It could be that your snapping option is disabled. I have addressed this in the webinar (link in the description). I recommend watching it. If too busy, look for it in your settings (search for snap)

[@David_HX]

Your Sketch has not been "Fully-Defined" yet if you can grab a line and move it to distort the sketch -

[@moneshm754]

explain the mouse controls

[@with-Aryan]

too early in this series. Will do in future episodes. Thx

[@awsome6182]

Thor would be proud of your Mjolnir model

[@with-Aryan]

lol

[@dr360ethan9]

U BEST!!!

[@with-Aryan]

you are the best too!

[@7amadama]

I wanna say thanks ... But i tried the free webinar and it says page not found idk what happened

[@with-Aryan]

Good day, Sorry for the technical issue, send me an email at [e-mail] and we can work things out there.

[@mrdark3060]

GOD!!!My broo

[@with-Aryan]

yo! thanks for watching

[@jipjip213]

my xy axis indicator does not have a snap-to star like yours

[@with-Aryan]

Watch my webinar ( link in description) it's about your snapping options. Or just go to settings and look for snapping options.

[@Garfi28]

My circle was not fully defined. When you drew it, you didn't explain that you locked the diameter of the circle with the right mouse button.

[@with-Aryan]

I did not do such a thing,

[@ΑλεξανδροςΠλιατσικας-β9σ]

I keep getting an error telling me the sketches cant be updated bc solving them would result in invalid geometry

[@with-Aryan]

at what point?

[@giodiagon2409]

For once, the software is actually really useful

[@with-Aryan]

it really is

[@vabzzz]

In the *10 mistake video* I can't go back or forward 10s incase I daydream, its really good tutorial but not having this feature takes the worth out of it and also can't watch it again

[@with-Aryan]

I'll send the webinar replay to your emial adress

[@asaholey]

Fusion 360 is more efficient than SolidWorks. In fusion, when sketching a rectangle you can add dimension in one go

[@with-Aryan]

i wouldn't say that. You are refering to one feature that you like. it would be a drop in the ocan for both. they are way deeper than that, and cannot be compared like this

[@asaholey]

@@with-Aryancreating rectange and adding dimensions in solidworks takes 2 steps. You cant extrude 2 intersecting lines in solidworks

[@quickdiy8127]

Is it a dumbass idea to define all features to the origin for a part, like treat it as the only datum in gd&t ?

[@with-Aryan]

it varies case to case, sometimes you do want to base your components relative to each other. So yes, it is not the necessarily the best way to define ALL features to the origin all the time

[@rudreshkhunt6281]

I learned a lot from you, but I think you are faking people particularly in the free sessions after watching the webinar, as I watched full webinar but there is no free course available , I am really sorry if you felt wrong... But this is reality...

[@with-Aryan]

Good day Rudresh, I'm sorry you did not have a good experience but it looks like a technical issue on your end. Since I have a FREE MINI COURSE, send me an email and I can sort things out.

[@AjaysrinivasUjjini]

It's Mjölnir ⛈⛈⛈

[@with-Aryan]

Pardon my pronunciation.

[@waqashassan8700]

any one who purchased mini course?

[@with-Aryan]

about 6K people, and it's free, nothing to purchase

[@objection_your_honor]

Why do we need to see your head in the video taking up screen space? Isn't your big watermark not enough?

[@with-Aryan]

people have different request, you dont like it this way, noted!

[@mariolucrezi2195]

When your girl says she has a good side^^^

[@JuanAvalosNetworkMarketing]

I wish its get work

[@with-Aryan]

it will

[@aldublin6043]

You talk too much, referencing tangent thoughts/ideas not centric to the lesson, and use too many shortcuts that "beginner" users (who are watching your "Tutorial for Beginners") cannot/do not know how to follow.

[@with-Aryan]

thanks for the feedback

[@veliyldrm3180]

Hacked i guess

[@with-Aryan]

?

[@shreyankpalekar4604]

😆😆😅😅 ads

[@with-Aryan]

oh no! Which one? :D