Solo Mining Bitcoin BTC with NERD MINER + Case Installation

One for the gamblers out there, who doesn't like the chance of winning the lottery? Well the chances of hitting a winning valid BTC Block are very slim, but with this low-powered USB Miner, you can do just that!!! As the saying goes, you have to be in it to win it, although I would add this isn't financial advice.
The ESP32-S3 T-Display pairs wonderfully with the NERD Miner software to display your real-time BTC Solo Mining efforts, alongside with some new screens in v2
In this video I will be unboxing the ESP32-S3 Board with built-in 1.9 inch screen and LilyGo enclosure case. I will then go through the full software installation, followed by how to install the ESP32 in the LilyGo case.
Links to grab everything you need:
◉ LilyGo ESP32-S3 T-Display Board: amzn.to/44hcuI3
◉ LilyGo ESP32-S3 T-Display Board + Case: amzn.to/3XrDnXz
◉ LilyGo Case only: www.aliexpress.com/item/10050...
◉ USB-C to USB-A Data Cable: amzn.to/43Z4lIH
◉ GitHub NERD Miner Software: github.com/BitMaker-hub/NerdM...
◉ ESP Tool: espressif.github.io/esptool-js/
Have you setup a NERD Miner / Lottery Miner and been lucky enough to win a block? If you have any questions or suggestions, please free to leave them in the comments section below
Please like, subscribe, share and hit that Bell notification to be informed when a new video drops.
Please support the channel and get yourself some Savage Attire merch here: handyman-savage-attire.creato...
Thanks for watching, see you Savages on the next one

[@adriansnary]

Thanks for the vid!

[@halfayoumi]

Thank you brother, very well informative and clear. I followed your video pause/go etc and step by step perfectly works! 3rd address was changed into 0xe000 i thnk mine not 0xo000 that is all! everythink is working perfectly, so lets score 1

[@HandymanSavage]

Thanks for the kind words, glad it worked and let's get that win

[@bialpain]

thx very much

[@Eruptandretype]

Hey what are the pin chips for?

[@Xjag]

how are these devices with verus mining?

[@user-wr5hp7mm5e]

can this mine in pool also?

[@knowman01]

thanks for this i needed the help setting it up but the only thing is my screen went black and wont turn on any advise?

[@HandymanSavage]

Maybe try re-flashing it? Or look for my new video on the Nerd Miner 2 upgrade and see if that fixes the screen issue? As a bonus, you get double the hash rate

[@Dj_drona]

How do you remove what is mining

[@katania2000.]

after i tried to program it showed me this Error:, "Error: Cannot read properties of undefined (reading 'BOOTLOADER_FLASH_OFFSET')"

[@HandymanSavage]

Try this method which is web-based and easier. As a bonus enjoy double the hash-rate: kzbin.info/www/bejne/kKS0nGWCbteLeac

[@onyinyechiukpai7584]

Which mining pool is best for the nerd Miner V2, public or ck

[@HandymanSavage]

ckpool has been fairly reliable

[@aspen6040]

After installing this the screen on my nerd miner went black and now it won’t turn on. How do I fix it this is useless now

[@HandymanSavage]

Try reflashing it, or upgrade to the latest version of the software with double the hash rate: kzbin.info/www/bejne/kKS0nGWCbteLeac

[@wetfloor426]

All I can see when I try to connect is communications port. No debug option.

[@HandymanSavage]

Try the new v2 firmware - kzbin.info/www/bejne/kKS0nGWCbteLeac

[@LIFEISTRIANGLE]

Do you receive satoshi from this thing? Or if you don’t get the block you don’t get anything?

[@logann001]

no block no sats

[@filipewilsonribeirorosa730]

Posso deixar ele ligado apenas na tomada ou tem que ficar ligado no computador?

[@HandymanSavage]

Você pode fazer qualquer um, só precisa ser alimentado por USB. Isso pode ser feito por computador ou qualquer plugue/carregador USB normal, etc.

[@user-rf1oc2to1d]

Hello im new to the mining portion of crypto. I had a question if anyone knows or has experience, so i know you have the lottery miner's running solo for the 1:zillion chance to get the block. But, for example if someone was to buy one of the miners and set it up with a pool then does your miner make anything at all?

[@MistaDollaD]

i think it would but because it only does like 55,000 hashes /sec on average i don't think it would produce very much at all and you'd have to run it for a while. it might make a few dollars if you pool mine if your lucky over time. i'm still waiting in mine but i do want to run it along with my bitaxe 1366 ultra. that hashes at a rate of roughly 1 th/s. but this is such a good tool for learning.

[@user-rf1oc2to1d]

@@MistaDollaD on the 1th/s are you pool or solo

[@MistaDollaD]

@@user-rf1oc2to1d when i get mine this week i think i will join a pool so i can get reoccurring amounts of satoshis into my wallet

[@MistaDollaD]

@@user-rf1oc2to1d probably pool both of them to get some profit out of them the nerdminer you should 100% pool with other nerdminers

[@user-wr5hp7mm5e]

Can this also join pools and mine? Please educate me on that? please...

[@thepcaa-vc3jm]

Hash rate on Nerd Miners are way to low to contribute anything of worth to a mining pool for shared payout. Your best bet with nerd miner is to use it as a lottery miner, as it only requires one successful hash to mine the block.

[@detoekomst1129]

I cant reed al 4 boxes! I can only reed the first one: 0x0000 and then?

[@HandymanSavage]

Try the new version and see if that helps: kzbin.info/www/bejne/amekgpKmib5jqKc

[@walterwhitley2834]

I followed your video and now I get audible sounds and my screen went black and wont turn on .

[@HandymanSavage]

You could try the following: 1) reflash it again or 2) upgrade to the newest version which gives double the hashrate - kzbin.info/www/bejne/kKS0nGWCbteLeac

[@Wurstsuppe100]

does anyone know how to get to the dashboard of the nerdminer ? If I want to change the network later, how do I do that ? Is there a dashboard or another web interface ?

[@HandymanSavage]

It's very easy to do. Simply press the reset button (on the bottom) of the Nerdminer. When while it is restarting, press and hold the top orange button until you see a Pairing screen. Then simply go to your phone, connect to the NerdMiner WiFi and the Config page should auto load. From there, as per the video, you can change the Network and Pool settings

[@Wurstsuppe100]

there is no dashboard. Press the reset button it restarts the configuration

[@acey4994]

Does your pool show any stats both ck and zsolo show nothing for me

[@HandymanSavage]

Did you get "Not Found" when entering the BTC address in ckpool? I would have expected something even after a day of solo mining. I might dabble with other Solo pools to see how they compare

[@acey4994]

@@HandymanSavage I just get 0 for hash and workers but used the same address to mine to before with another miner.

[@HandymanSavage]

Try now, i think ckpool was down all day, it looks to be working now

[@regiocoin1340]

My NerdMiner is working perfectly, but I want to access the configuration again, where the wallet is placed, network password, etc. and I don't know how to do it, I don't see any app or find on my cell phone networks. Where can I find this part, I want to review the wallet I wrote, thank you! WiFi Manager, minute 4:05

[@HandymanSavage]

Did you manage to get into WiFi Manager to do the config?

[@theclaybeartravels3596]

It doesn't work for me. I put it my info over and over and just will not connect to my wifi. I am not sure what I am doing wrong.

[@HandymanSavage]

Couple of things to try. Which WiFi band are you connecting too? If using 5Ghz, try 2.4. Also, maybe try the new version of the software and get triple the hash-rate: kzbin.info/www/bejne/amekgpKmib5jqKc

[@theclaybeartravels3596]

@HandymanSavage it was just a matter of logging into my wifi setting and re-enabling the 2.4ghz. I had it disabled becasue it was interfering with the 5ghz. I forgot I disabled it because it was causing my Tv not to see my wifi network with both 2.4 and 5 going at the same time.

[@AllBikesGreatAndSmall]

If you're lucky and you actually mine a bitcoin, does it auto send it to your wallet?

[@HandymanSavage]

Yes, you provide your BTC receive address when going through the setup, which any winnings would be sent to

[@AllBikesGreatAndSmall]

@@HandymanSavage awesome. Thanks for taking the time to reply.

[@henriksandfr2529]

Hey, I can not get it to connect to wifi. The screen on the lily is telling me: - Waiting to config use this wifi to setup The screen on my phone is telling me this: - Saving credentials - Trying to connect ESP to network - If it fails reconnect to AP to try again nok any luck connecting to my network. What am I missing? any advice? thanks:-)

[@HandymanSavage]

What Wifi band are you connecting to? Must be 2.4Ghz to work with the Nerd Miner.

[@Bird1984-jr8qc]

Thanks. It’s is running now. Great video.

[@onyinyechiukpai7584]

How can I win a block, if so how do I collect the block

[@HandymanSavage]

You win a block my simply mining. If you win a block it is automatically sent to your bitcoin address which you enter in the setup

[@JamesKo-uq4ol]

How do I know how much BTC that I have mined?

[@HandymanSavage]

If you hit the jackpot, you will see the Valid Blocks area of the screen say "1"... that's when it's time to party

[@DIY0815]

flashing does not work for me. after selecting the files and then pressing on programme, only the message Leaving appears. I can set the port baud rate. Does anyone have a solution?

[@HandymanSavage]

Have you tried different USB ports and also different USB Cables? -You'll be surprised how you can lose many hours because a cable has gone faulty but still connects

[@DIY0815]

​@@HandymanSavage Serial port WebSerial VendorID 0x303a ProductID 0x1001 Connecting.... Detecting chip type... ESP32-S3 Chip is ESP32-S3 Features: Wi-Fi,BLE Crystal is 40MHz MAC: ec:da:3b:xx:xx:xx Uploading stub... Running stub... Stub running... When I remove the USB cable and switch it on again, I no longer see the LilyGO logo on the display. Is the original LilyGo software available for reflashing?

[@Wurstsuppe100]

Use the flash tool from the bin folder to do this

[@blaqkfrozste8750]

I followed the instructions now the screen wont turn on?

[@HandymanSavage]

Try the new version: kzbin.info/www/bejne/amekgpKmib5jqKc

[@blaqkfrozste8750]

@@HandymanSavage Thanks for the reply I was downloading the wrong version all good now :)

[@ednilson50]

My Nerd Miner is 0.00 kh\s, could you help me?

[@HandymanSavage]

Is it permanently at 0.00 kh/s or fluctuating up and down? If fluctating, try adding a fan, see my other video. If it's permanently 0.00, try a different Pool, or upgrade the Nerd Miner to v2 - look in my recent videos.

[@user-lu2qw4ul6d]

how to restart thank you

[@HandymanSavage]

Press Orange button on the bottom for a few seconds, it will restart

[@oparedez]

is this Lottery ? Im looking for Mining only with no Lottery.

[@djmerlin2]

then the are loads of videos about that

[@G9G9GGGGG]

No bitcoin for black job

[@mohamedharriet]

Now

[@mohamedharriet]

His available on TELEGRAM user name below 👇….

[@mohamedharriet]

*@Earncryptohack*