Solved - Baofeng Problem not receiving signal

[@electronbob6676]

This was a great tip for beginners like myself. Somehow I had set a tone that was preventing signal reception. Thanks!!

[@davetee3589]

You're the best , haven't used my Baofeng for years because it wouldn't transmit and only receive. Thank you

[@timmandelcorn3321]

Thank you very much. Almost sent back a second radio.

[@borninthestates]

Thank you lady. This is what i needed today. Problem solved

[@wearemany73]

I’m a bit dim and you helped me figure out why my radio wasn’t putting out a signal. Please be careful transmitting without an antenna, it can badly damage the radio.👍😎 Thx for helping me.

[@timmandelcorn3321]

False

[@therightlife9434]

You solved a real problem for me. Thank you.

[@mw10259]

YOU JUST KILLED YOUR RADIO TRANSMITTING WITHOUT AN ATTENNA. GOOD JOB

[@Gruuvin1]

Why don't you realize that a couple seconds will not hurt it?

[@davealig5968]

You're transmitting w/o antenna

[@philip8753]

i agree im a ham and tx with no ant can damage the ht

[@BLACK_PANTHER08]

what is the problem if my uv5r only working on uhf and cant connect on vhf channel

[@boogaloo62]

perfect thanks for the help

[@VirtualLunacy]

If I set my radio to a simplex frequency it seems to work okay but when I program in repeaters I can only hear the audio when I press the menu button. I bought three of these radios and none of them work properly they're all coming back

[@willtech1759]

Sir, how to fix the no signal issue? Example i try to call but not receiving of the other side because of no signal antenna indicate on the screen only signal bar appear.

[@savagecabbage7021]

My r ctcs was already off I tern it on then off again and it fixed my problem hopefully it doesn't happen again

[@mickeydavis2250]

I am getting signal and white noise but nobody talking except the weather. I have tried 2 different citys but nothing. No ham radio or police. If anybody has ideas I would appreciate

[@meTimetraveler]

my UV5R would not receive turned out to be the fake NAGOYA antenna , has blue printing on the base. I bought a real NAGOYA antenna Silver Printing, now the radio works again

[@glimor]

Do not transmit without any sort of antenna attached!

[@cymye9187]

Could you pls send us with one video , we help you with your problem.

[@glimor]

@@cymye9187 I have no problems, but thank you.

[@cymye9187]

@@glimor You are welcome , have a nice day!

[@cameronharris-aldred9594]

This dumb fuck transmitting without an antenna, then asking what your issue is 😂😂

[@BrothaJeff]

I turn it off but it keeps staying on

[@kelzagoodman]

Very good

[@patrickbodine1300]

No antennas.

[@хочувсёсам-к9й]

Nice video 👍👍👍

[@Pauloaugustogarcia1]

hello! I´m having another trouble with this radio. In my case when I turn on the radio, everything works perfect, but after some minutes I just cant hear anyone, but the PPT works fine. When it comes, I need to turn off the radio and turn on again. Do you know how to solve this trouble? Thanks =)

[@VirtualLunacy]

Yeah I'm having a similar problem. If I go to 14652 with two radios I can hear both of them but if I go on to the repeaters I never hear anyone I just sit there listening to dead air until I hit the menu button and then magically I can hear the conversation for 3 seconds. I was told these radios are hot garbage but I bought three of them anyway. I'm going to try and get my money back through Amazon

[@linkmaticelectronicspakist4693]

This is so stupid to transmitting without an antenna it may burn damage the set.

[@bradlong7941]

Stinking "privacy codes". I hate privacy codes! Nothing private about them. Some of these cheap Chinese radios go to a default privacy code once you turn them off. Always scroll through your entire menu to check the settings. Do NOT trust the radio.

[@Ma.Mal-]

keep keying up without the antennas they'll work great

[@rickramirez7710]

please upload video with higher audio. you can barely be heard.

[@kanamilife6520]

asian rulez