Sonoff 4CH - 4 Basics in one

[@HunTomiBp]

Zsír volt ez is, köszi! Üdv.: Tamás, Stockholmból

[@stevew9945]

Another good video keep up the good work, looking forward to the pro video

[@ronnierayan6610]

i know it's kind of off topic but do anyone know a good site to watch new tv shows online ?

[@lincolnamari3486]

@Ronnie Rayan I use FlixZone. You can find it on google =)

[@r5bc]

In my opinion the major difference between 4ch and 4ch Pro is the RF433 support, that the 4ch don't have.

[@VrajeshR]

I see 1 Neutral input into the device and you have connected the switches to same Neutral backside.. Will I be able to take wire output from neutral from the device's each slot to each individual switch?

[@pralishaadhikari9232]

Hi, how can I set a loop timer for the 4 CH Sonoff, i'm having a really hard time. Expecting your reply!! 🙏

[@ovi_s]

Hi. What Sonoff device can I use to open my gate from the remote and if it is dark to turn on lights? Thanks!

[@csongorvarga]

You need a CH4 Pro, because it has a dry contact output and the garage door use that. For dark, there is no light sensor in sonoff, but you can restrict the light scene by time at least.

[@ovi_s]

@@csongorvarga Thank you. I'm thinking of making a scene. When the gate opens turn on the light and I can put a twilight senzor on the lights cable.

[@csongorvarga]

@@ovi_s yes, that is a good idea!

[@gondezo]

Is it safe if I connect the output directly to Air Conditioner on each channel ? Is it have auto cut off when we have an electric short? I want to use this type to control 4 Air Cond

[@csongorvarga]

The 4CH has a 10A relay for each channel. That is around 2200W. This depends on the air conditioner, but it could be too small. I would check the rating of your unit. And no, this does not have any over power protection.

[@gondezo]

@@csongorvargait's about 4A for each unit.. So, what's your suggestment to protect the over power or any electrical short? Do we need to install circuit breaker on each output channel?

[@bogdan1802]

Hi! Quick question, on 4CHPROR3 how do you reset it to factory defaults? I have a strange situation, it has the default firmware on it and when i ask to turn on all lights only 3 turn on, one remains off. If i go and turn on specifically that channel relay it works just fine. any ideas pls?

[@csongorvarga]

Uh, sorry I have no idea. Try the itead forum...

[@lacaval]

Great video! Can i use a Sonoff TH10 parameters (temperature and humidity) to control a 4CH R3?

[@csongorvarga]

Yes, by setting up some scenes.

[@Webseries548]

How to two way switch connection switch board ​@@csongorvarga

[@csongorvarga]

@@Webseries548 How do you want to do 2 way with this?

[@arasykeysha]

Can this device connect to smartlife?

[@csongorvarga]

No, Sonoff's eWeLink app only.

[@mathiasodabaajonye7762]

please I want you to educate me which password will I input on the app during pairing mode, I don't know my phone wifi pa ssword 2.is hotspot password the same as wifi password?

[@csongorvarga]

It is the password you specified on your router. Or the password set by your isp when they installed the router.

[@giorgiorastrellone646]

i have connected 4 irrigation's evalve solenoids to sonoff 4ch pro. But my version is probably older and i don't have interlock mode which would be useful for time saving of the garden irrigation. Imagine that I have to cover 4 garden zones but I have to do it one zone at a time. With the interlock i could irrigate all the zonez at the same time..

[@csongorvarga]

I am not sure if older version existed from the pro model. Create a manual scene like I did which cycles through the outputs one by one.

[@poukhangpanmei5315]

How to connect the phne?

[@peterkiraly6843]

Awesome. Could you tell us how this pairs and runs with google assistant? Because they sold me a couple 20 dollar xiaomi cameras saying theyre compatible with assistant but really.. they arent

[@csongorvarga]

Yes they are. Works with my Google Home devices.

[@rudiexx420]

@@csongorvarga So in Google Home app, it shows four separate switches, right?

[@csongorvarga]

@@rudiexx420 Yes, it does. It shows the name of the individual gangs as it is named in eWeLink.

[@belairxy]

What about loop timer

[@satyam-raikar]

Can i connect it with Manual Switchs+Sonoff

[@csongorvarga]

No, it does not have a switch input. Unless you take it apart and solder wires to the built in switch manually.

[@Webseries548]

​​@@csongorvargatwo way switch work?

[@baniloro-rh1uq]

Blutot???

[@csongorvarga]

No blutot

[@dandiki]

Im always scared that Sonoff products blow off in places that i put them and cause fire! Especially after i watched AvE vid!

[@csongorvarga]

Yes, most of EU households have 16A breakers, which will not protect a 10A Sonoff. This is why many people prefer Shelly which (not all of them) have a 16 relay.