sonoff ifan 3 Light & Fan Controller Unboxing, Wiring Installation, Wifi Configuration & Alexa Voice

[@firedispatcher]

Thank you so much for this video and the below help you gave to the google home question for fan or light on/off separately. I'm a little techie, but their install instructions are horrible. I found out how to set up to WiFi by reading a iFan02 instruction and lot of guessing. Thanks again, Paul

[@sweetness6048]

Would this work with a exhaust fan

[@farmerbob339]

Since mid-summer 2021, there has been an iFan04-L which is the US version with the proper Caps for a 110-120 volt fan.

[@jacobvarghese7597]

ifan02 missed the feature to save previous state when power goes off. Do fan03 have that feature ?

[@deepakcoolm]

Can we control the fan speed using google home/ alexa ?

[@Techlogics]

Yes, it will work

[@pohchangchew8497]

Does it work with DC fan?

[@premprem9634]

Nope

[@vishvpatel1225]

can we use regultor for fan speed

[@Techlogics]

No

[@aabidaslam9936]

Can you kindly tell me if you can also make this work with switches as well

[@Techlogics]

Switch control will not work.

[@CursoPortugues]

My fan also has the hood function, how do I install it?

[@utkarshmalyan2088]

Can i also controll the fan speed with this device???

[@Techlogics]

Yes, 3 speed control available (Low, Med & High)

[@EudaemonVideos]

So after wiring up with the original manual wall switch/dial, but they don't seem to work anymore? Also, the RM433 RF remote seems to work in proximity even without pointing its head at the iFan03. Could you test if it works while resting on its base plate on top of the iFan03?

[@Techlogics]

Yes, The manual switch won't work anymore. And the remote is working with RF frequency so no need to point the remote to the Ifan3 device. The remote will work from other room also within 10~20mtr radius

[@EudaemonVideos]

@@Techlogics Thanks a lot, this is very helpful! Did the iFan03 wprk with DC motor fans too? Also, reviews were that the low and medium speeds were too slow, but not sure if it was okay at 220V (current at 173mA and 453mA respectively).

[@nordmann8161]

Hi, I installed the sonoff fan 03 and afterwards I put on my light toggle. The result is that the sonoff 3 is beeping. The light is working. The fan is not working. Furthermore I can't find the device in the ewe link app. Can you help me? What is the problem? Many thanks in advance.. Thomas

[@Techlogics]

I think its a firmware issue, Try reset the device and start configure again

[@PavanSmart313]

@@Techlogics how to reset the device??

[@adrianTNT]

could you fix it ? I have a similar problem, it beeps but I never find it in the eWeLink app 😕

[@eplandi]

thank you

[@Sparks0001]

Thanks for the video, can you control the fan speed with Alexa too?

[@babinjebasamuel6107]

App working without Wifi or not

[@Techlogics]

Without wifi/internet APP will not work

[@maxnankervis8246]

Ive added one of these to my google Home, but it only comes up as a light called “Dining fan” and turns on both fan and lights, is this “Normal”?

[@Techlogics]

Example: set your device name to "Living Room", Ask google home to search for new devices. Then call from google home like "Trurn ON living room Light" / "Trurn ON living room Fan"

[@alexdiwayne3362]

I had this problem before now is more complicated. If l put on app lights on then l need use a one of pull cords down if l want a fan l need another pull cord down and on the up saying lights they are on but they not options fan on app don't respond at all. If u have a contact to u. I will message u directly

[@smithinm3217]

Remote is not working after connecting wifi