Sonoff RF Bridge 433 works with 433MHz RF Remote, RF Door Sensor and RF IR sensor

The Sonoff RF Bridge can convert 433MHz RF controlled devices to be App remote controlled devices. It supports to learn with 433MHz RF Remote, thus you can control those 433MHz RF devices (like 433MHz RF switch, RF socket, RF bulb) on the App EWeLink. Besides, it can work with 433MHz RF curtain switch, 433MHz RF door sensor,433MHz RF IR sensor and more. By working with the RF sensor, the APP can receive alarm notification messages.
The RF Bridge is compatible with Amazon Alexa and Google Assistant.
Buy Sonoff RF Bridge 433: www.itead.cc/s...

[@Iteadstudio]

Update the latest firmware for RF Bridge 433, you'll even see it has supports schedule/countdown/loop timer for the RF Remote, it also supports to turn off the alarms so that it won't push any detection message when you are home.

[@MrDoncarlosp]

Please help me, I need to do what you say and I can not do it. I need to turn off the door sensor and motion sensor notifications Monday through Friday between 9 am and 7 pm. I added the sensors to the bridge and the RF remote control, but I can not configure for the control to turn on and off the alarm notifications. I have the latest version of firmware 2.7.0. I would appreciate your help. Greetings.

[@goodvideos4119]

Can I learn RF remote signal of an unbranded LED Strip using this SONOFF RF Bridge and control the LED strip using the SONOFF bridge by passing voice command to Google home mini or Alexa?

[@antonis7785]

Can I use this module to open/close my RF controlled garage doors?

[@先生陳-b7r]

DW2-RF before can be learn,but now can't,when i press other rf433 button ,the rf receive led light on, means it receive the rf433 signal,but not learning,is that a software bug?

[@ibancorominas3233]

There's any way to control blinds an pair the RF Bridge with the Harmony Hub device?? Thanks

[@florincostea184]

I plan to use 4 pir sensors and one rf bridge, so I need to know how the ewelink app is working. Can you receive the notification with the phone in stand by mode (in your pocket)? How much it will eat the phone battery in one day?

[@BigBBradley1]

the RF Brigde is great, but you should add ir and the next version. and i have 2 off the uk light switches i cant use no neutral wire so maybe update for the uk.

[@lynnkenney]

The switch must have the neutral wire to power it. This is not a UK issue.

[@goodvideos4119]

Can I use SONOFF RF Bridge as an universal RF remote?

[@ginstuttgart8223]

Hi, how to use PIR2 with Lamp B1?? I have a lamp, but not this socket.....lamp B1 does not have a loop time which can also switch off the lamp

[@markallenbusa2381]

Can This device control the Sonoff Wireless Switch without internet using the 433Mhz feature of the smart switch?

[@johnnyboy0069]

Hi, i am trying to set my door sensor to turn signal on when contact is broken but it only seems option to turn on when the contact is brought together, btw i am only using basic sonoff switches, do i need the rf ones??

[@astroplutonium]

Is it possible to use Digoo siren with the sonoff Bridge?

[@stephane4237]

Bon j'ai ouvert le mien que je viens de recevoir il était sur "on"... Donc ça doit venir des prises que j'ai acheté qui sont en 433,92 mégahertz, mais qui doivent sans doute être à code tournant ou autre protection du genre. C'est un pack de 3 prises télécommandablent de chez Action, model Flamingo. Elles sont compatibles avec la prise mère connecter sur HOMEWIZARD qui était aussi vendu chez Action aussi. Du coup grâce à la prise mère je peux les contrôlés et grâce à l'application par le web, mais j'aurais voulu grâce au bridge rf , les contrôlés avec Google home ! 😟 Bien déçu que ça ne fonctionne pas !

[@joelai86]

Hi, I bought sonoff bridge together with 5 door sensor and 1 PIR, however my sonoff only can connect 4 device maximum (4 door sensor), how should i do?

[@Iteadstudio]

RF Bridge can support at most 4 alarms, so you need to buy one more. Please submit a ticket on www.itead.cc/contact-us if you need further customer service support.

[@easwaran83]

Can we have an Ewelink Scene, were SONOFF B1 (LED bulb) is triggered with specific brightness & Color when Sonoff PIR2 Detects a Motion. (PIR2 is connected via Sonoff Bridge) . Please let me know

[@Iteadstudio]

Hello, you can setup scene with PIR2. Once detects a motion, it can turn on or off another device. But we don't support such a scene with B1 as you mention.

[@easwaran83]

Ok. Which Means it cant even ON or OFF B1??. Please let me know

[@Iteadstudio]

The sensor's alarm can trigger a simple turn on/off another device. The brightness/color can't be triggered, you have to set on the app.

[@note421]

Is that possible to use door sensor to postpone and trig the switch. For example, I use automatic garage door. When I opened the garage door I always for get to close it. I want to use door sensor to trig the switch for closing the door when I forget after 1 hour. Possible?

[@Iteadstudio]

eWeLink app doesn't support set up timer and scene featues together, so it's not possible to do so.

[@jordimasanac]

It didn't work with somfy courtain remote control, please fix it

[@juniormeneguetti4910]

I added two door sensors but the notification is not working. It saves the time but does not trigger the notification. What makes it useless. Also does not tell you if the door is still open or closed

[@Youtuberardo]

Me too !

[@stevenflynn9347]

Hi, when on the app if you go to set up a scene it doesn't show any rf devices?

[@easwaran83]

Hi Is it possible to do the following using Sonoff Bridge & Sonoff Motion sensor combination? if the Motion sensor sense Movement it should trigger a light that is connected sonoff but the triggering of light should happen only in the night time. (Say 9PM to 5AM only) If Motion sensor sense Movement during Morning hours(Say 6AM to 8PM) it should NOT trigger the light connected to Sonoff Basic. Is this scene/Scenario possible?

[@MrFirephly]

Yes look at IFTTT and Stringify. Together you can set that up.

[@easwaran83]

Yes, Darren Wootton . I tried to set that up. It works. But the time that is taken to execute that scene takes 7-10 Seconds. (Sensor to IFTTT to Stringify to IFTTT) . By the time the light Switch ON i would have moved away from that place without the lights. :(

[@saeedalmatrooshi4790]

does this use ewelink?

[@davidacciones83]

I have Broadlink TC2 Smart Touch It´s 433MHz Frequency Can I to user RF sonoff whit it?

[@Iteadstudio]

I think so, it works with the 433MHz devices.

[@davidacciones83]

Thanks for your answer I have another problem: The problem whit Sonoff touch is necessary 3 cable electric for light. We only user 2. It does not work Regards

[@FabioNacciLemon]

With this can create command RF for tv, or other?

[@tomlillevig9868]

No. This unit takes the place of an existing RF remote to control things like power outlets.

[@NoName-gt5ow]

sonoff have a RF Door Sensor product? if have it. i will buy. bridge and sensor. please answer

[@StefanMakker]

No Name on it is off broadlink I think PiR And door sensor

[@Iteadstudio]

Yes, we are planning to sell the sensors.

[@StefanMakker]

Great and when it comes :)

[@NoName-gt5ow]

asap sell that sensor!!

[@Iteadstudio]

Actually, you can buy the 433MHz RF sensors and learn in the market.

[@Blackpro124ff]

seems scene not working properly?

[@BalazsBezeczky]

How many signals can the bridge remember?

[@Youtuberardo]

Four

[@tomlillevig9868]

It can support up to four remotes and/or alarms. However, if you have multiple buttons on a remote it can support up to four buttons per remote. That allows up to 16 devices to be controlled.

[@BalazsBezeczky]

Thank you!

[@daromee]

Ok ,I got the kit from a seller on a_i e_pr_ss and it didn't have a remote so I ordered one but in the meantime I set up the system to see if the sensors work and they seem to be very sensitive ,so far so good !! Now I am looking for an RF 433 MHz siren to set up with the alarm does anybody have any ideas ,or ITEAD are you planning to sell one cause I would buy one at least and I am sure that everyone who has this type of system would love it have one .What's your ideas ????

[@jaywhite1850]

These door sensors have to be so close to each other that they’re unusable.

[@aldindelic7752]

After upgrade dont work anymore

[@StefanMakker]

Very good by me not work :( The RF Bridge dont like learn code.

[@StefanMakker]

VooDooN yes hear but not learn only 1min check the button

[@StefanMakker]

VooDooN and how can open the bridge have you video

[@StefanMakker]

Hi you have have 3 different remotes RF Bridges? but on the video we can see is working :)

[@StefanMakker]

And works all for you?

[@Iteadstudio]

Yes, so our technician adjusted the hardware recently.