SONOFF Zigbee Thermostatic Radiator Valve Installation Guide | Step-by-Step

[@hansolololol]

I needed almost all of the adapters lol. My house is so old :D Works perfectly with HA/ZHA.

[@dr-evil]

Is there a way to recalibrate the valve? I switched radiators and now it doesn't properly close the valve.

[@DJZupix]

I have the same problem…

[@dreamkiss]

Does anyone know if its possible to pair this TRV with SNZB02D or SNZB02P for better temperature accuracy? I know generally speaking the temperature accuracyfrom TRV's is not the best and work better when paired with an external temperature sensor.

[@Kirtapp91]

What is Automatic Mode really?

[@tulpenboom6738]

Why not use use rechargeable 1.5V NiMH batteries? Will the device break? Why?

[@cowesdave9503]

Is it possible to set this up so it can tell a boiler to provide heat, i'e just from these valves rather than having a thermostat? Also, what happens if you have two radiators in the same room, can you just set the temp for the room?

[@user-xe5dh2pt2w]

For the Tado TRV setup you need a smart thermostat, a hub and then the smart radiator valve. What do i need to purchase from SONOFF to do the same? i would like to warm the childrens bedroom seperately.

[@SONOFF]

If you're looking to implement individual temperature control and monitoring in your children's bedroom and currently don't have any smart home gateway devices, you'll need to purchase the following SONOFF products: Firstly, the TRVZB, a smart thermostatic radiator valve, enabling precise temperature control in the room. Secondly, you'll need either the SNZB02D or SNZB02P, which are temperature and humidity sensors to monitor the room's climate. Lastly, a Zigbee Bridge Pro is required, serving as a gateway device to connect all your ZigBee devices, allowing for unified management and control within your smart home system. With this combination of devices, you can effectively manage and adjust the temperature in your children's bedroom, ensuring a comfortable and safe environment.

[@fyfysdfsdyfdsfysdfsd]

How can i re-adjust the valve? I need a low distance to pair it successfully, but i can then use it fine on the valve. but i need to readjust or re"debug" it somehow

[@yuritrukshans2882]

I have Sonoff host, how to connect via host instead of bridge?

[@jedidja1st]

why I can add it to zigbee bridge?

[@channelcheats]

Can this be paired to the ZigBee hub that's builtin to an Amazon Echo?

[@SONOFF]

Hello! This device can be paired with the ZigBee hub built into an Amazon Echo. For scheduling, you can set up schedules in the eWeLink app, and these will sync with the device to ensure everything runs as planned. If you need more help or have any other questions, feel free to ask!

[@petrmenzel5493]

The one device (other work) cannot be found. Is there any option for hard reset of the thermostatic head for example?

[@petrmenzel5493]

Even if the hard reset had been done (battery out, hold middle button, battery in) it did not help. 😬

[@user-kz5tp8rr3d]

Is this thermostat compatible with the Philipp Hue Bridge?

[@10Rusboss10]

yes

[@Alex_robles22]

Уже прошло 2 месяца с момента как Вы презентовали этот продукт. Но до сих пор его нет в наличии и продаже ни у одного продавца на Али экспресс?!!!!

[@SONOFF]

К сожалению, из-за ограниченного запаса на полках у нас есть только ITEAD. Для покупки вы можете перейти по следующей ссылке. itead.cc/product/sonoff-zigbee-thermostatic-radiator-valve/ref/10/

[@cleo_4]

Will be this available for zigbee2mqtt in homeassistant?

[@SONOFF]

You'll need to use the Sonoff dongle to add it to Home Assistant via zigbee2mqtt or ZHA.

[@cleo_4]

@@SONOFF I already have that. Does that mean that it will work in zigbee2mqtt?

[@SONOFF]

With the Zigbee 3.0 USB Dongle Plus, you can adjust the temperature and control devices. Please note that schedules cannot be edited directly through HA using the dongle. For schedule modifications, use eWeLink. Additionally, users can perform OTA updates via HA using the dongle.

[@cleo_4]

@@SONOFF thank you so much for the prompt reply. I really appreciate. Will I be able to turn the trv valve on and off via the sonoff zigbee 3.0 dongle that I currently have?

[@SONOFF]

Absolutely! If you possess either the ZBDongle-E or ZBDongle-P models of the Sonoff Zigbee 3.0 dongle, you should be able to manage the trv valve effectively.

[@BeppeSardella]

Is it possible to control each valve from Google Home? I wasn't able to do it

[@SONOFF]

It will be supported by Google Home at the end of Nov.

[@SONOFF]

It is supported now, please try again.

[@BeppeSardella]

It's true!! What a great news! Now each valve can be driven directly from Google assistant. I just tested. Thanks

[@a360ly]

❤