Рет қаралды 57,740
Explains how to set up an iPhone to remote control Sony a6000 camera - using the newer Imaging Edge Mobile app for iOS / iPhones. The video shows the process to link the app to an a6000 camera, but should also be relevant for other Sony mirrorless cameras. The process to link the camera to your phone is a bit complicated. Here is an overview fo the steps:
1. Create a Sony account so you can download PlayMemories Camera apps. Easiest to do this on a computer. Later, you'll use your ID/PW to download apps to your camera.
2. Connect your camera to your WiFi so it can connect to the online store (your camera, not your phone). Go to camera menu system and find Access Point Setup.
3. On your camera, go to the online camera store. Go to the camera menu system and find Access List. Click to open PlayMemories Camera apps. Download the app Smart Remote Control to your camera.
4. On your iPhone, download the Imaging Edge Mobile app by Sony. This replaces the older PlayMemories app. Log in using your Sony ID/PW.
5. Back on your camera, open the Smart Remote Control app you just dowloaded. It should tell you to connect your phone to the SSID provided (it creates its own hot spot - your phone will connect to this).
6. On your iPhone, open the Imaging Edge Mobile app - tap option to Connect to New Camera. It is easiest to use your iPhone to scan the QR code on your camera (it is a shortcut to connect to the camera's hotspot). If you get an error, turn everything off and try again.
7. You are all set - you can now control your camera using your phone.
NOTE - The app can control the camera to take photos, but unfortunately, the app cannot control the camera to take video. It may be that the a6000 camera is too old - this may differ on newer Sony cameras.