Sony KD-65X750H no picture, just 6 red blinks at bottom. Full TV Repair.

This is a complete step by step repair for a 65" Sony 4K Android TV, model # kd-65x750h in which when you hit power the standby light at the bottom of the TV goes from white to red and flashing 6 times with a slight pause in between every 6 blinks.
Where to get the BL Strips:
www.shopjimmy....
The ART of Troubleshooting and Repairing Modern Televisions:
bigdogtvrepair...

[@caseymar996]

I really am not a comments guy… but have to give you a big thanks for this great detailed video. Bought the led strips from the link and saved my tv that i only had for 16 months before the six blinking light issue. Up and running again!

[@bigdog8882]

Glad I could help.

[@DrewAmos-l7y]

I followed all your steps and was able to successfully get it up and running again. Fantastic tutorial. Thank you so much man.

[@bigdog8882]

Great to hear!

[@wallyshannon3397]

Great video!!! I followed this exactly and my TV is back up and running! Thanks, BigDog!!!!

[@bigdog8882]

Glad to help Wally

[@carltiefenthaeler5763]

I thought about a new one but the picture is as good as new after the repair. Was worth the money for us, but on the other hand, T.V. s are reasonably priced / Affordable to purchase a new one.

[@andythomas7931]

Welcome back! thanks for another great video. Clever idea to mark the ends of the strips so you know where to park the strips.

[@souleym]

Thank you for this great walkthrough. I was able to save a TV that was gathering dust. Very clear and concise video. The little tips here and there made the whole process easier.

[@Frenchee076]

Thanks for this video, I just followed all your instructions and my TV that was only 3 years is now fixed and working!

[@edwardanthony7283]

All that for a stupid bulb! Why didn't they make special circuitry to compensate for a dead bulb instead of having it shut the entire picture off..

[@delinlian2757]

This is better than some Samsung model combined strips and power board both dead😂

[@sergiutudor969]

Great video. Fixed the backlight on a 65x8077G thanks to it . Note he wrote in subtitles to purchase the strips from shopjimmy. I missed that and the ones I got from amazon came without tape (2 weeks lead time) and the overall length was missing a few mm of length - so the ends did not lined up - had to spend extra time to ensure it is properly aligned. also don't be tempted to remove the side covers with them up i almost damaged the COFs . Do it exactly as he shows in the movie crawling under the table. I did not have a power supply to actually test the strips, just replaced them all straight as he said. you could fell how brittle it were after 6 years of use.

[@todoom3152]

greatl video. i have same model only lasted just over a year before i had same problem you fixed. where can i get the parts for the back lights you installed?

[@MasterJoda35]

Got one of these tvs off fb marketplace for $25 and fixed it following this video. You're the GOAT and the video intro is amazing.

[@enayes21]

god them backlights irks me havin to change em and the fear of breakin the panel imagine nightmare city great job bro

[@Arturo-zy1kr]

Thanks bro for the video, I was able to repair my TV which is the same model as the video, and the repair was much cheaper than taking it to a technician who charged $250, and I only had to invest $25

[@nickmurry3199]

I replaced the LEDs but still no illumination and 6 red blinks. They turned on once like at 23:30, but when I unplugged they never came back on no matter what I did. Later I replaced the power board and main board but still nothing. TV repair is not for the faint of heart. Time (about 12hrs total) money (~$100) for nothing in the end. I'm not qualified to diagnose it further. Thank you for the video though.

[@TheGWC1946]

Super video BD. Worked great for me ! My neighbor had the same problem with his and got some cheaper LED strips with no tape. I told him where to buy but he ended up getting them somewhere else without the removeable tape. I told him I didn't know what's best to or how they would be best to put on with two-sided tape or super glue on the high areas of the back plate? Any suggestions? Just a warning to anyone . The LED's don't all come with tape on the back. Glad I got mine at SJ. Thanks

[@saarike]

Great salvage!! Thank you.

[@electronicrepairservice2020]

Very nice repair. I have your course. Not a fan of the suction cups. I tried that once, they left circle images (2) in the panel. Never again😡

[@bigdog8882]

The circles usually aren't permanent, never had problems with the suction cups, I hear you though. Glad to have you. Thanks.

[@electronicrepairservice2020]

@@bigdog8882 I dunno, they were still there after 3 days😳, so not sure how long it takes for them to go away, the only saving grace was the panel ended up being bad. Didn't want to end up having to explain that to a customer ... 'they go away eventually' - just not worth the headache or risk. I know it seems convenient to use them but just not for me after that experience.😖 The last thing I want is to be sued or have to buy a replacement set.☹ PS - enjoying the course!👍

[@DavidMartinez-l8i]

Like the work that you’re doing on TV question I have the same TV was given to me do you have to change all the strips or you can just change the LED bulbs?

[@ro.b4179]

Great upload I can fix my sony bravia kd65x750h same one u fixing with 6 red blink... thank u

[@bigdog8882]

Glad it helped

[@Arturo-zy1kr]

Great video, I have the same model and problem... Is it necessary to change all the LED strips or can only the damaged one be replaced? greetings from Mexico

[@bigdog8882]

Replace all Arturo.

[@thedirtytruth666]

I wish you were in AZ. Same model, same issue. TV didn't even last 3 years. Not sure I could do this. I dont have the suction cups either.

[@hookedup9424]

Do you know why the top half would be dim after doing this repair?

[@bigdog8882]

Sounds like all the backlights aren't lit. Check the backlight connectors.

[@hookedup9424]

Okay so I figured it out last night around midnight. I took it to the TV shop to get repaired. They replaced the LEDs but when assembled they said the top half was dim and they could not figure it out. I brought it home, took it apart and reassembled it three times. I realized on the third time that the thicker clear screen was flipped around. The TV is working perfectly now. Thank you for your video

[@shervinderbhatthal669]

Amazing work 👍

[@manny4486]

Yo whats good big dog i grounded out the bl error wire no 6 blinks. if i take a flashlight to the panel i can see the screen display, but no backlights at all. Should i replace the tcon? Any ideas?

[@Juliette-xb9xn]

Do we have to have the same tv

[@amitzahirr]

Great video man.

[@SorenCarlsson-qr9gy]

I have problem with a sharp slc70le741s backlight i think cause its dark on the left lower side and now the left side has started flashing and blinking what else beside the backlight strips can be the problem?

[@bigdog8882]

Check the backlights.

[@SorenCarlsson-qr9gy]

@@bigdog8882 ok thank you I give a try. I guess the backlight strips is 2 pieces on left and right side in the downside of the tv?

[@SorenCarlsson-qr9gy]

I opened the tv and it was 10 led light on the left strip that was not working maybe it something wrong with the main board because the light didnt look burned and now the tv is completely dead

[@raphaelromero9631]

Which LED lights did you get? And where did you get them at? Specific model will be VERY helpful (don't want to order the wrong thing). Thank you in advance!!!!!😊

[@cryptodave4482]

Legit

[@josephsmith7561]

Contact to fix my TV

[@jamest8158]

In this video: kzbin.info/www/bejne/qJK2iWeGbdp6prcsi=QT_KKVfzVq0Abd_p the wire for the LED light is cut so the TV can turn on regardless of diagnostic errors. The TV's LED had been blinking 6 times and the TV turns off after turning on. Will cutting the wire cause the TV to start a fire 🔥because the TV is overheating and the diagnostic blinking red light is disabled, which, had it not been , would had turned off the TV automatically ?

[@danbobe3480]

Brother i have a free tv for you lol

[@FredApril]

Just replaced the LED in my Sony 65X800G by following your video. Every step was identical. Great video thank you very much!

[@swardmusic]

Worth the trouble? Have a 65x8500g needs same

[@FredApril]

It was or me :)@@swardmusic

[@whyumadbrah2882]

Thank my brother..u the man …everything detailed step by step ….thank u for taking ur time to show us how to do it the right way ….👍👍

[@jkjacksn]

Great video! The step by step process with commentary was exactly what i needed. Thanks for talking the time!

[@brianjames6890]

BD, I always use a hot blower to remove the old LED strips as they come off so much easier. Top tip for all.😜great upload. 👍👏👍👏👍🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@kevingarvey4887]

Kudos to you, sir. Your video was one of the most detailed DIY videos I have ever seen. Step by step tutorial and the video images are perfect. Thank you!

[@bigdog8882]

You are very welcome

[@kevingarvey4887]

@@bigdog8882 I just wanted to let you know that my TV is now working perfectly. I ordered the LED kit, and they came with 4 broken connectors. The seller sent me a new kit and I just finished replacing all of the LED strips, following your directions, and it fired right up, and I have no parts left over. The job is tedious but if you take your time, it's all worth the effort. Thanks again!

[@dre145]

I had an led die on one of these Sony TVs in about 2 weeks since unboxing. Returned the tv. Not sure about the quality of Sonys leds. But thank you for the video

[@stephenbrannan6629]

Very informative , but what a job? You can’t be serious Edward , 😂

[@amirb715]

The best job I have ever seen. Thanks

[@carltiefenthaeler5763]

The exact same thing just happened to our T.V. Sent it to a repair shop, they charged $300.00 if anyone is curious about the repair cost. LED strips are cheap, but taking it all apart, let someone else do it.

[@jdheelfan]

I might as well buy a new one. Mine just did this

[@jam_2315]

Just begun taking mine apart. I'm normally real good at stuff like this. We'll have to see

[@officialfetti7685]

Bought lights off eBay for $30. LED tester for $18 on Amazon. So $48 in to fix a TV I paid over 1k for can't beat it

[@mahmutmod]

Hi sir I have sony xbr 75x850c they sony bravia 6 red blinks problem sometimes work 30 min after again closed I have this tv almost 10 years old which part I need chance or replace? Thank you

[@musadikt503]

Thank you , good informative video , I am an Electronics technician and I like this video, you were careful not to damage the screen while doing this job, the only thing I always do is I secure the four corners of the diffuser sheets that will make them aligned together and much easier installing them back, some tvs are more difficult in doing this job when the LCD screen is taped or glued to the frame which make this job either very difficult and higher chance of cracking the screen while trying to separate it from the diffuser sheets

[@MrSantistock]

Thank you very much! Extremely helpful and thorough!

[@whizzo55]

I just did a 65" Samsung and at 72 years old they are hard to handle! My son has a 75" and I am not looking forward to wrestling that flexible thang! I am too skeert to use cups on the screen. I have a 2 1/2" x 4 foot yard stick with two loops of gaffers tape as handles and blue tape to hold it to screen. lol

[@gemsys]

Thank you very much for this vid. Long time Sony lover here, couldn't believe it when tv went out after a little over a year. Didn't want to toss it. Your most excellent tutorial saved my Sony. Much appreciated.

[@haggus228]

Hello Mr. Robert. I followed this video to repair my 65" Sony Bravia TV 65X750H. After successfully completing the repair, the TV screen turns on but is stuck on the select language screen. I attempted to use the old remote and a new remote with new batteries but I cannot figure out what is going on and my online research has resulted in nothing. The power button on the back of the TV doesn't do anything either. I have to unplug the TV to have it turned off now. Any ideas? Thanks!

[@shervinderbhatthal669]

I have sony KD-65X750H TV and same problem red light blank six times please you fix my tv .llike your work. Please send me location thanks you. Sir told me the approximate cost.ok

[@zeitgeist1348]

Hello, are the newer tvs (example Samsung) are only glued? How can you open this tvs?

[@bigdog8882]

Never had a TV that was glued. The Samsung uses a Pry tool to get the back cover off.

[@shunmugamsammu5242]

Super

[@amitzahirr]

2 wires going to the strip came out of the connector going to one of the strips. How do I know which is positive or negative?

[@Clintk14]

Bro how did you figure this out just curious 👀

[@stang1966gt]

Hi My sony xr-83a90j has a constant, fast flash. I don’t see anything online for flash codes. I just posted a short video of the flash on my channel. Any ideas?

[@stang1966gt]

kzbin.infon6z8otcp_lw?si=-uhdb-_VjuoLwbWa House wifi all stopped working after a lightning strike. The tv was connected vis ethernet

[@Maine_87]

Nice video. I'm 11:20 in and have come to the conclusion that I'm going to drop my TV off my balcony. I'm not about to do all that to try to fix it lol. That's not a quick simple fix. So rather than me putting my TV outside for some stranger to come along and pick up and fix and now they have a nice 65", off the balcony it goes. If I can't watch it nobody can. I wanted a 75 anyway.

[@niklaspersson5136]

Did this thing (thanks!), but the screen has patterns as many as led panel lines with darker rectangular spots. Do you know why? Barely visible. in some light, when white I see them at once.

[@bigdog8882]

you either damaged the screen or you have the ribbon connectors uneven or not pushed all the way in the sockets.

[@niklaspersson5136]

@@bigdog8882 Thanks. Actually you may be right... :(

[@TheKykkkkkk]

Hi wondering if you have a television repair shop. I'm located in Chicago and have the same exact problem with the same television. Would like to locate you and see if you could help me out with it!

[@bigdog8882]

If you are located on south side or south suburbs call Marc Anthony TV repair.

[@bryanarevalo17]

Is that the place name?

[@kami009]

Lord I went through this entire process and used led tester and all my leds were good they, all turned on each strip was 16 v I have 55 inch version , I get audio but complete black screen tv doesn’t shut down it continues to play audio

[@kami009]

Hello sir , I did the same exact test as you with my LED tester I also didn’t get any voltage input when I just used main leads for the back lights but when I did the test on the strips every single one was turning on ! Could I have bad wiring issue to cause the open ? I ordered some LeD strips from eBay hopefully it solves the issue makes no sense to me that my strips turn on with tester on the strip but not through the wire

[@chadbentz7650]

Awesome guide! Found out that i cracked the lcd panel when i was moving it lol 😅 still fixed the leds for the fun of it

[@shunmugamsammu5242]

Sup

[@wisher21uk]

Hey you’re back!! thanks Marc nice instructional video, I’ve been doing tvs foe years but I would still be nervous using the suckers, heard of a few that have failed at the wrong time and the screen was damaged 😮

[@bigdog8882]

Once you get them locked on the screen, I just pull on them to make sure there good.

[@wisher21uk]

@@bigdog8882 cheers Marc I may give them a try thanks bud

[@kami009]

I can see now that you opened up course hence why you are busy and won’t answer peoples questions here

[@alfie5055]

Thank you so much for taking your time and posting this video! It helped me and other DIYers $$$. Same issue same tv model. One tip I can share is outline the backlight strips with a marker before pulling them out. Picked up the strips locally (Toronto) for $100. Bigdog you are the man!!!

[@Amgc4]

Got the same tv , gave me the 6 blinking red light now and warranty ended last month now im here watching this i thought it was gonna be easier im a carpenter and have no knowledge on electronics ..maybe i should buy a new tv... man this shit costed me 800$ when i bought it.. makes me want to fix it so bad 😢 where do i buy this led strips ?...Should i contact a local tv repair spot man this shit sucks 😕

[@jcowle86]

Everything went great except somehow the screen cracked in the corner. I inspected it when I took it off and everything seemed fine but at some point something happened. I'd say one of the hardest parts of this is finding space to work on it. Our massive dining table isnt even enough. Your instructions were great though. One final note. Be careful when removing the white plastic paper. It can tear pretty easily.

[@ionbusman2086]

Dang! Was hoping I could just swap a new board on my mother in laws tv… nope! Shorted out backlight too. Shame, nice TV only lasted 4 years.

[@wagnerribeiro8036]

Hey @BigDog8882 just got to fix a xbr-65x800g tv I found by the side of the road. Spent 60 bucks with the LED strips and 3-4 hours fixing it. Mind sharing your venmo so I can drop some support for you? It would be fair since you saved me a good amount of trouble shooting time/money. Thanks sir!!!!

[@cdd228]

Hi, I have the same TV! Where did you buy the strips?

[@lilbert3609]

Thanks BigDog8882 went step by step on this video same sony works great again 💪🏼😤

[@devonsmith7953]

Hey Robert, which backlight tester do you recommend and why? Thanks bro, you are awesome.

[@bigdog8882]

The same one I use with the current adjustment, so you can increase the current for testing edge-lit backlight strips.

[@devonsmith7953]

@@bigdog8882 can you give me a link?

[@bigdog8882]

@@devonsmith7953 www.amazon.com/Backlight-Tester-Constant-Current-Testing/dp/B0B3Y96PJ5/ref=asc_df_B0B3Y96PJ5/?tag=hyprod-20&linkCode=df0&hvadid=642234065174&hvpos=&hvnetw=g&hvrand=16794420926338310079&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9021634&hvtargid=pla-1915701046761&psc=1&gclid=CjwKCAjw9J2iBhBPEiwAErwpeV6uZDNVdegtVHpoi-2WLj9Gasq8eGwX_eYHH_AGC9_A4mljaJvMJBoCTCMQAvD_BwE

[@devonsmith7953]

@@bigdog8882 thank you.

[@dustintrowbridge9952]

Hey Robert. I just picked up one of these TV from a buddy because the LEDs are not working. I can see the screen works, it's just not lit up. Do you think replacing the strips is a safe bet here?

[@brianhackit7900]

Cannot thank you enough! Thank just picked this TB up of the curb.

[@johnparker9482]

OUTSTANDING WORK BIG 🐕 📺 👏👏

[@Technogodd]

🤛 Thanks brother ! SONY KD-65X75CH identical.Great explanation and works like charm !

[@sandmanliner]

Where did u find the LED lights I have same model tv .

[@Technogodd]

@@sandmanliner got it online. It's shop Jimmy if i recall.

[@MohdhishamuddinKamaŕuddin]

❤❤❤

[@garyy6196]

Hi Big Dog, for those of us who don't have a LED tester, what should the output voltage (voltage going to LEDs) be at the backlight (one line) plug. If the voltage is good going to the LEDs, don't the LEDs have to be bad?

[@bryanjohnston9879]

Gary these LEDs are usually 3VDC or 6VDC. The string Voltage can vary based on the brightness but for example, a 10 LED strip might be 30VDC at the input. When one dies (open or short) the whole chain usually fails. You can find other KZbins where people show you how to diode check them with a VOM. I haven't watched the whole video but this guy might do it here...

[@TheGWC1946]

Can you tell me the brand and type of tester he uses for testing the LED lights@@bryanjohnston9879

[@adriantoia]

where did you get the LED strips from ?

[@TheGWC1946]

Shopjimmy. Just put the model number of the tv in for parts search. I do a lot of Amazon but I would stick with an actual TV repair shop. I believe BD gets his there. Hope this helps.

[@miloosa6917]

Guys please help! i have sony bravia Model : "KD-65X9004A" The Tv turns on dimmed like the image is on 50% but its full on brightness.. after a minute it slowly turns off and the Indicator Flashes Red 4x times... what could be the problem ? i can't find any solution regatding this model on the internet also no tutorial or parts for backlight.... any solution?

[@lendabloke]

Bloody brilliant video! Well done. Thanks for taking the time to explain and share.

[@bigdog8882]

My pleasure!