Sony Muteki STR-K1000P Sound Test

👉Amplifier section
Power Output1)
Models of area code SP, MX, E51
(6 ohms 1 kHz, THD 0.7%)
FRONT : 80 W/ch
CENTER : 80 W
SURR : 80 W/ch
SURR BACK : 80 W
(6 ohms 1 kHz, THD 10%)
FRONT : 130 W/ch
CENTER : 130 W
SURR : 130 W/ch
SURR BACK : 130 W
Models of area code AUS
(6 ohms 120 Hz - 20 kHz, THD 0.09%)
FRONT2): 70 W/ch
CENTER2): 70 W
SURR2): 70 W/ch
SURR BACK2): 70 W
(6 ohms 1 kHz, THD 0.7%)
FRONT2): 80 W/ch
CENTER2): 80 W
SURR2): 80 W/ch
SURR BACK2): 80 W
(6 ohms 1 kHz, THD 10%)
FRONT2): 130 W/ch
CENTER2): 130 W
SURR2): 130 W/ch
SURR BACK2): 130 W
👉Model : Front Sony SS-MFP1L/SS-MFP1R
Speaker system : 2-way, 3 unit, (magnetically shielded)
Speaker units : Woofer - 160 mm cone type × 2
: Tweeter - 25 mm, horn type
Enclosure type : Bass reflex
Rated Impedance : 6 ohms
Dimension (w/h/d) (Approx.) : 250 × 950 × 273 mm
Mass (Approx.) : 15.5 kg
👉Model : Surround Rear Sony SS-SRP1SL/SS-SRP1SR/SS-SRP1SB
Speaker system : Full range
Speaker units : Woofer - 100 mm cone type
Enclosure type : Bass reflex
Rated Impedance : 6 ohms
Dimension (w/h/d) (Approx.): 171 × 216 × 149 mm
Mass (Approx.) : 2.2 kg
👉Model : Center Sony SS-SRP1SL/SS-SRP1SR/SS-SRP1SB
Speaker system : 2-way, 3 unit(magnetically shielded)
Speaker units : Woofer - 100 mm cone type x 2
:Tweeter:25 mm, horn type
Enclosure type : Bass reflex
Rated Impedance : 6 ohms
Dimension (w/h/d) (Approx.): 514 × 174 × 219 mm
Mass (Approx.) : 5.6 kg
👉Model : Active Subwoofer SA-WMP1
Speaker system : Active sub woofer(magnetically shielded)
Speaker unit : 200mm cone type
Enclosure type : Acoustically loaded bass reflex
RMS output : 110 W (6 ohms, 100 Hz, THD 10%)
Input : LINE IN (input pin jacks)
Dimensions (w/h/d) (Approx.)275 × 331 × 374 mm including front panel
Mass (Approx.): 9.5 kg
👉Music by Anja Kotar - Can't Blame A Girl For Trying - thmatc.co/?l=A...

[@romance3624]

you have a great receiver, the best last good technology,

[@oldschoolvintagecollection]

thanks

[@LordofKings-Raj]

Beautiful sound ❤

[@alexandergamboa8679]

Hola ud le instaloas parlantes

[@oldschoolvintagecollection]

Para saber cómo instalar el altavoz para este sistema, puede buscar el manual del usuario en línea.

[@thalles5945]

Does this equipment have good sound quality?

[@oldschoolvintagecollection]

Sound not bad, there are a lot of sound field settings, you can choose base on your preference.

[@davidcaos8474]

hello, What is the sampling of the amplifier? Does it support 24bit 192khz? by optical cable?

[@oldschoolvintagecollection]

depends on ur device, im connect via mobile phone via rca port which support 24BI 192KHZ.

[@davidcaos8474]

@@oldschoolvintagecollection laptop used tidal master