Sophie & Toffee NEW Silicone Dice Mold Review | ROUND 3

New Molds = New Problems? Or did they improve...
The first 1,000 people to use the link or my code rybonator get a 1 month free trial of Skillshare: skl.sh/rybonat...
This video is sponsored by Skillshare.
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
If you want to mail me something, here is my Private Mailbox Address, so you can send me stuff to look at. I can't promise that I'll review them, but I'd love to see what you make! (Or just tweet me pictures if you make something, that's nice too!)
Rybonator
3515 Longmire Dr., STE B PMB 277
College Station, Texas 77845
Get your Dicey Encounters shell molds here!: www.diceyencou...
AMAZON AFFILIATE LINKS TO THE PRODUCTS I USE IN THE VIDEO (I get s small % kickback for purchases you make, at no cost to you :). Thanks for using these, but don't feel obligated. )
Sharpies: amzn.to/39z89J5
Envirotex Lite Resin: amzn.to/3ep4Txu (Available in gallon purchases as well.)
Alcohol Ink: amzn.to/3BGbW1g
Mica Powders: www.madmicas.com/
Zona Polishing Papers: amzn.to/2XY4VXl
Dragon Skin Silicone (More durable than the others, but more expensive.) amzn.to/2Apx8xD
Sorta Clear 37 Silicone (Not the exact same as 12, a bit more rigid.) amzn.to/3e06uJT
D&D Starter Set: amzn.to/3F6ZQPP
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.

[@Rybonator]

For nearly $100, you'd be far better off making your own molds, or buying from known mold makers on Etsy/instagram. 3/10 Hope this helps you in your purchasing decisions :) Also, ad plug - The first 1,000 people to use the link or my code rybonator get a 1 month free trial of Skillshare: skl.sh/rybonator07221 so yeah. If you wanna learn stuff, do that :)

[@Xanthira222]

What are some reliable mold makers?

[@senyasalonge]

Any reviews/recommendations for etsy molds/mold makers?

[@LeonardoVelezMementoMorrir]

@@Xanthira222 DiceEncounters makes some great molds and they're the ones Rybonator uses for his core/shell dice.

[@tawesssoabbox]

It did help actually as i was about to pull the trigger on these. But now i´l probably put in a bit more and go with diceyencounters mold. It looks really good.

[@moonlight5050]

They charge $100 for those...!!!! Wow....and such poor quality too. Fantastic honest review 👏

[@pinkusdean1178]

Dang Rip Sophie n toffee with their dice molds, just doesn't seem to be their thing unfortunately. Great review!!

[@Rybonator]

I really wish they could get it right enough for me to recommend them to people. It'd be an easy starting point for a long of folks :/

[@syrune303]

@@Rybonator any recommendations for someone who wants to start like me for a set of molds?

[@Flyingchipmunkofd00m]

@@syrune303 DiceyEncounters!! Please I cannot recommend them enough!! Their molds are reaaallly amazing

[@zombei_kid]

I wonder how they handed the quality control of this. I got a really badly damaged d20 mold from them and they told me they hand check everything and that I was lying (: They did send me a new dice mold so like.. yah

[@syrune303]

@@Flyingchipmunkofd00m my order is in, thank you!

[@justjordyn6729]

I’d love a review of the mini dive mold and giant d20, I don’t plan to buy it, but I really enjoy your reviews and just seeing you make dice or other resin projects. Btw, I really miss the terrain videos

[@Rybonator]

I can do that :) Maybe I'll do a new terrain build... I haven't done one of those in ages :)

[@bri8661]

@@Rybonator I really do recommend the mini dice mold with UV resin, it works really well. I mostly just make earrings with it (which it is perfect for), but it works best with some force on the lid to really minimize the flashing. For epoxy I might recommend putting something on top of it while curing because if you squish it and then release, you just add bubbles. Hopefully this helps for if you do the mini dice (if you haven't already filmed it)

[@Jcraft153]

More dice mold reviews are in order! Great review

[@Rybonator]

Happy to keep reviewing them :) Also thank you!

[@spikestreak]

Rolling the molds on the table was the most satisfying part of this video 🤤

[@FlamesOfSymphony]

Ohhhh, your lid explanation might shed some light as to why I had been struggling to get good dice out of the molds I made myself. I might have to try making new molds and compare my results =)

[@abagoffrozenspinach]

it's interesting how much more complicated and yet still problematic their designs have become. I hope they keep trying-solely to see you make more videos on them! :D

[@Rybonator]

I'm looking forward to round 4 :P

[@Verity_Reigns]

Oh yay love the review videos. Good or bad it’s always nice to hear your take on things and see any issues that might arise. While I would definitely like to see the tiny dice mold just to see if it works, it might also be nice to see another mold making video where you make your own tiny dice mold. I’m sure there are a lot of different challenges when it comes to making something on such a small scale and it would be cool to see that journey. Plus I bet you could use it to do cool things with leftover resin from bigger dice projects as long as it doesn’t get too hard between pours.

[@Rybonator]

I could try that :) That's certainly lots of complications when it comes to making your own tiny dice molds, but it could be worth a shot!

[@kawaiisnowyangels]

Thank you Rybonater! Saved me nearly $100! 😅

[@Rybonator]

Happy to help :)

[@zikasilver1]

so, I get the Elves Box and Disney boxes; I have the new mini dice and the giant d20, plus their Kingdom Hearts dice molds. What confused me is that on their Kingdom Hearts mold, the special emblem is on the LID as 1 instead of on the bottom to take up the highest value. Which means that whoever made that design decision doesn't know gaming dice. And I've yet to see S&T mention a pressure pot or vacuum chamber with any of their molds. I feel like they specialize in small, UV resin crafts, and not really in thicker projects.

[@Rybonator]

They did the logo on the lid so that they didn't have to REMAKE all the bottoms. Easier to just pop on a new lid than do the bottom stuff. So that's why it's on the 1 :/ But yeah, they are mostly an ART thing, not a dice/useable resin company I have found

[@troygreen3035]

I am glad that I am not the only one who has been having issues with them. I would recommend not trying the chonk as you will be bitterly disappointed with the voids it produces. As for the mini dice mold, you need a flat metal nozzle and either a squeeze bottle or syringe to get the resin down into the small hole in the top. The keys are good, but you will need elastic bands holding it together or your resin will flow out the bottom of the mold. I went back to making molds with dragonskin and sortaclear from Smooth-On and not one void in a dice from them yet. Hope this helps!!

[@pbg624]

Thank you for the review. I have occasionally thought about buying their set molds but since seeing this video I will make sure to avoid wasting my money by buying

[@Rybonator]

Better to save that $100 :)

[@vandazandlova5867]

Thank you for the review, it's very useful! I'd like to see the minis and the big d20, though given the history of Sophie & Toffee dice molds, I don't have high hopes for either A dice set theme idea specifically for you: **robot fish dice** since you are Rybonator. The fish is right there in your name!

[@stephenthomas8312]

Did I win again? Even thought we're out in the sticks, I got the notification! Can't wait to watch later on!

[@Rybonator]

Shows a tie for the first time :)

[@stephenthomas8312]

@@Rybonator ah, oh well. Can't be helped. We're out to beautiful Bonavista, in Newfoundland, for the weekend!

[@Rybonator]

@@stephenthomas8312 Oh man, I'm jelly! I'm stuck in texas with broken AC on my car. FAR less fun. Y'all have a great trip!

[@stephenthomas8312]

@@Rybonator yeah, our fridge broke the day we left. Not a good time. Thanks though! Good luck with the AC!

[@Stef_T-G]

I want a review on the other!!! Yes yes yes!!!! Am I alone who prefer longer videos? (Just asking)

[@Rybonator]

Glad you like the longer stuff :) I can always go into more detail on stuff

[@Stef_T-G]

@@Rybonator yes!!! I miss your longer videos!!! 😁

[@TJtheBee]

Oooph. That’s a bad sign if you’re getting bubbles even with all of that prep work. Excellent review as always, Rybo.

[@WolfWalrus]

I do like oversized dice. The plus-sized Spindowns that M:tG has done for the last couple of years are such a satisfying size

[@Magikarp_king]

Great review. I'm glad you mentioned the issue with having a large lip on the d20. Had I known that the first time I bought dice molds I would have started by making my own. On a different note I've been making Galaxy style dice using purple, blue, and pink with a bit of glitter mixed in then lightly swirling them. I think you would enjoy making some of the same.

[@Rybonator]

I made galaxy once, but not nearly as cool sounding as yours! I might have to try that :)

[@Magikarp_king]

@@Rybonator I loved your Galaxy dice video. I actually used your rainbow dice and Galaxy dice videos as inspiration.

[@Flyingchipmunkofd00m]

Thank you so much for this! I honestly was gobsmacked when they released this mess of an item. It started with the box which was 6 months delayed (They only gave the chonk and mini dice in the box the thank you for not canceling your order after 6 months of uncertainty was a free tiny bottle of S+T pigment) When they released the dice set it was so similarly priced to DiceyEncounters that I was better off getting a mold from them! Like I couldn't believe they were charging Artist prices for these cheapo molds. I'm so happy you did this video! I'm happy to see them in action and I'd love to see the Chonk and minis too. I regretfully have them since I ordered the box but I just...don't want to use them before I see someone HONESTLY review them like you do.

[@Rybonator]

I'm glad you found this helpful :) And it's cool to see my buddy DiceyEncounters mentioned in your comment :D Happy to review the chonk/mini!

[@Flyingchipmunkofd00m]

@@Rybonator I love their molds and have bought quite a few before I get confidence in sanding and finishing my own masters I honestly think for the price point Dicey does amazing starter molds for those wanting to get into it! And tbh if someone was wanting to buy S+T dice molds...I'd just say buy Diceys instead!

[@popcornpanda3640]

Would love to see the other ones we made. Just to see what happens

[@Rybonator]

Hopefully they improved! :)

[@UriskOfTheFae]

These review videos are so helpful. Even though I never intend to buy molds, these are a great way to see various design choices that can make or break a mold

[@lilomarie2]

can't wait too see you do the mini and the chunk d20 one

[@Not_Rain]

These reviews are so helpful, I really want to make dice and I can afford it I’m just choosing how I want to do it, I don’t want to make mistakes when making my own moulds but I don’t want to spend everything I own on ones which don’t work, thank you for this video

[@crickett3536]

This actually makes me feel better on how my dice made from their molds in the past turned out. I was also really new to resin and that was one of my first big projects, so this (and your videos in general!) gave me more insight on what to try when I'm ready to try again. Thank you!

[@SonofThor85]

That is a bummer. Those looked so promising. I would love to see the other two anyway. Especially the giant D20 mold, that's the one I was wanting to get. I had many plans for it, if it was good, but now I am unsure and would love to see what your thoughts are on it. Great video as always!

[@davidlove236]

Thanks for this review, along with the other dice mold reviews you’ve done for Sophie and Tophie. I’d like to see a review of the mini dice set since I like to use mini dice.

[@celloafterdark4173]

Yes, I'd still like to see the other two!

[@EternalTotem]

The ad, transition🤣 noo nooooo! 😂😂😂🤣🤣🤣

[@bri8661]

I bought the mini dice molds and they work really well for UV resin because you can give the mold a good squish. I use it to make dice earrings because the dice are honestly too small to really use. It works great for me.

[@JC_the_Trash_Panda]

THANK YOU!!! I was waiting for your review to decide if they were worth buying or not.

[@CasperSallee]

thanks for reviewing these so that i don't waste my money on them!

[@am0ebab0y]

I would like to see the other dice molds, mostly because little dice...

[@Rybonator]

Teeny dice do be cute

[@radish6691]

The absence of intro puns told me all I needed to know about the molds 😆

[@tabathasteele7547]

Yes please do the other ones as well.

[@iv5vi]

2:30am. Time to go to bed. Let me see if any good vids dropped so that I can tag em to watch tomorrow. Oh wow, a Rybo vid literally just dropped? Watching it now...

[@Rybonator]

Ayy, that made me smile :) Have a good night sleep Beadan!

[@Churros25]

I am very interested in the CHONKY BOY D20. I saw that when ordering the Kingdom Hearts Subscription box.

[@Rybonator]

I'll make sure to review it then :)

[@troygreen3035]

I haven't had a single good pour out of mine in 5+ pours :(

[@amberstar7530]

Currently watching whales by the ocean as this came out today is awesome

[@Rybonator]

Oh man, that sounds wonderful! I'm jelly :)

[@amberstar7530]

@@Rybonator if you ever wanna visit Newfoundland we know a few places :D

[@tawesssoabbox]

It would be fun to see you tackle the minin one just for the sheer frustration it would bring (they suggest you make the dice as two halves and then join them manually.... ) The big chonker would be fun tho.

[@tmntleo]

Yikes, I thought there might be problems but wasn't aware they would be this bad, definitely avoiding these. I would love to see the other two dice moulds as well to see if they're any better!

[@ellisretropunk9908]

amazing review, i'd love to see a review of the big d20 and the small set!! idea for another video: making dice with duochrome/multichrome/colour-shift pigment? i mostly see it used in watercolour paint/ink and also makeup, which makes me imagine it's mica/powder-based and i think it could make some REALLY cool dice :0

[@Awrethien]

Easy to see where the problem is, after the squish of the top part of the mold is squeezes out any extra and leaves the air bubbles inside. Then when the pressure pot compresses the air there is no extra resin to fill in the void... As you say not made by a person who actually has tried dice making.

[@jon_franklin]

I'd definitely like to see the tiny and massive ones particularly because the extra weight may help the D20. I always like seeing little dice though so it'd be cool to see those

[@Haden398]

I personally would love to see a review of the other two molds as well, I assume they will suffer from some of the same issues but it would still be fun to see.

[@jose31626]

I HADN'T SEEN YOU POSTED THIS OMG?!

[@gryphonglassware481]

I had a feeling that would be the case with these mold. My Chonk D20 mold from the box is horribly off center and I have to make sure the top is placed a certain way for it to be center and when working with resin you sometimes don't have time to make sure it sits 100% right. I am unsure if S&T actually have a pressure pot to test these molds in from what I have seen them talk about. Which would explain why the molds are awful with pressure pots. Dice with voids and bubbles is not what anyone wants.

[@hunterpowers2568]

Cool 😁💜 glad to see a video from you (also purple dice😁👍)

[@Rybonator]

Thanks Hunter :) Hope you enjoyed

[@hunterpowers2568]

@@Rybonator you’re welcome and always will 🙂💜💚

[@cathyb7774]

I really enjoy your videos and please share your experience with the mini and chunky Dice mold.

[@notshardain]

I get the feeling the way to make these work (possibly) and to (maybe) lose the weird voids is to suck the bubbles out of the resin before pouring with a vac chamber, but then that could require switching up the resin used to get the longer work time so you can go through the extra process without running out of time to pour into the molds. Perhaps if you're paying a decent amount for dice molds, you maybe probably shouldn't have to work extra hard just to get nice results out of them?

[@mizunderstood37]

Thank you so much you just saved me a cubic butt load of cash! Especially as i was shipping to the UK. Im still interested in the other moulds though

[@e.english9925]

I would love a review on minis. I had my eye on them when i saw them

[@DeathsPit00]

I make my own cap molds so I don't need to be here, but watched anyway. Great review, man. I am interested in that Chonk D20 though.

[@sebastianacacia7621]

I would enjoy seeing the mini and giant dice results

[@Rybonator]

I can make it happen then :)

[@sebastianacacia7621]

@@Rybonator mostly because I want to see super tiny dice 😂

[@BunnyNuggetz]

WOW! Thank you so much for your review!! I was about to buy those :( I am very much not going to now, bummerrrr!

[@ZelpharNorlee]

I was actually looking into these molds. But something in my brain told me to wait until you reviewed them. Very glad I did lol

[@ownsacat]

I love S&T molds but not these. I bought a couple of the regular dice molds and can not get decent usable dice from it. I am glad to see its not just me having the problem.

[@FarihaAb]

These remind me of a higher quality version of the wish dice molds. Especially the resulting dice, the only thing different is that they don’t have the gap problem.

[@Neuralatrophy]

3 part with a sprue and reservoir so the pressure pot pushes more resin into the mold instead of air perhaps.

[@LevidelValle]

Let's see the mini and the chonky

[@Rybonator]

Hard not to try it, with names like chonky

[@blazehammer192]

Reviews are always great. I personally don't like wasting money on something that I'd otherwise get.

[@walkingcabbages]

I’d like a review on the chonk d20, it keeps getting advertised to me. Though I imagine how the rest of their moulds have turned out, it’s probably not great.

[@oreo_of_doom]

Man I remember when they where doing this we had to wait for months to get the dice. And I mean months! About 5-6 months. I have the mini dice and the big one. I would love to see a video on it because I am having problems using the dice molds and I don't know what I am doing wrong 😅. Love the video and I am so damn happy I didn't buy this set in the end.

[@patiencemoxley]

I want to see you review the other molds that you got! Especially the smaller dice molds!

[@4MEStudios]

So what is a good silicone mole set? Maybe do a top 5. Yeah! A top 5 purchased set of molds for dice. (I mean we can look back and make our own as you have shown but, some of us are REALLY lazy) (or brand new and have never made their own dice molds.)

[@rapidfirerepublic]

Thanks for this. One mold you might like is from SilverLite Studio. They make an all-in-one cap mold that makes a set of seven with an extra D20. The dice come out damn near ready to roll.

[@timothybrown583]

You should show us how to make loaded/weighted dice.

[@twistedpixie6972]

Review them all! I love your reviews! They are seriously helpful to me! Also I am a “hobby hopper”, however my husband has called me a professional “Hobby Whore”. I wear that moniker with pride!

[@themakeshop1499]

Thanks for the great review. I was really hoping they would be good. Oh well, not buying these until they fix the issues.

[@PSroka]

Of course I perfectly wake up to see this from 1 min ago, was meant to be 😄

[@Rybonator]

I made it just for you to wake up to :)

[@PiokoMew]

I would like to see a review of the mini dice mold! Mini dice are also good for game play as well as decorations!

[@roundishwhale]

I have no plans to make my own dice any time soon, but still very entertained to learn how and how not to build dice molds xD

[@Hey-Its-Dingo]

I'd say give the oversized d20 mold a shot. If it works, at least it will be bigger than the other dice in the set.

[@andrewwebb6270]

I see a silicone mold review... Now WHERE"S MY RESIN COMPARISON VIDEO???? Just kidding, keep up the good work Ryan!

[@nicolequery5800]

you should review the other one too -- I'm curious

[@SlytherinReviews]

so basically these molds are made so that you can push out the dice along with removing said dice from the mold, which is good for those that want to make dice with this set. Also, review the ones from the start of this video

[@acearachnid]

wow, saved my money, thanks for the tip!

[@DrJCoy18]

I’d love to see you review the mini dice and big d20 molds! I know Sophie and Toffee has let you down before with the molds (and this isn’t any different), but I’d be interested to see what your thoughts would be on those! (Plus I just love your videos anyways)

[@Karmacranes]

i have some tea on this. i bought this set as there monthly box. i still 3 months on from it had not recived the molds. no explaination na da i got a refund. i was after a chonky d20 and mini dice. but glad now i didnt get these..

[@Rybonator]

Dang, at least you got your money back

[@Karmacranes]

@@Rybonator was a fight I didn't need though. At least im working with a mold maker near me but still terrible customer service

[@drago5303]

Can you please review the other molds i love your videos thank you

[@QuizMasterEntertainment]

I took me two minutes in the video to say "No thanks" to those molds, still watched the whole video, but certainly not Sophie & Toffee. Still waiting on the carved egg shell dice BTW, Liz is already working on the idea haha

[@Rybonator]

Yeah, they just aren't up to snuff. Oh man, I honestly would love to see what Liz comes up with, so I can be schooled hard haha

[@QuizMasterEntertainment]

@@Rybonator Even if you would mess up the first attempt I'd still think it would be a fun experience, wouldn't be that different from your diorama dice, just need a bit more creativity and a bit of skill. You would have no issue plugging skillshare, I can say that much haha.

[@bilistooka_go_boom]

I think the mini and chonky reviews would be neat. Are they also 3 ish part molds?

[@Waldhexe]

Thank you for being honest :)

[@NathanielTavington]

Here's the thing: S&T is never going to improve, because their dice molds are cheap crap mass-manufactured in China. They don't make the molds themselves, they buy them wholesale without any care or thought for quality. Look on alibaba/aliexpress and wish, and you will find those exact same molds. That is why there is no consistency with their design, and why sometimes their molds are very obviously ripped off a custom dice maker's style (Both shape and font). Honestly, the only way I'd ever use anything else from them is if THEY paid ME.

[@Rybonator]

I don't disagree

[@Vikingeek]

Would like to see the big D20 review, mostly because I got one, and haven't found it to be too bad aside from the extra flashing around the middle of the 3 part mold. Other issues I've been putting down to not having a pressure pot combined with it being big enough to potentially warrant needing to be done in 2 pours. Any I've tried to do as a single pour just ended up with voids on the 1 face where the bubbles have risen up during curing. Whereas doing them in 2 pours has resulted in no voids, but there is usually a visible row of bubbles between the two layers of resin. So far I've tried making 5 dice, 1 I did as one big pour, and there was just far too much air in the resin, so voids galore, but the others have come out as reasonable looking raw dice (not sanded/polished them yet) However i've got a few bits and bobs ready to try and make my own bodged together pressure pot to see if that helps with the air bubbles so I can also make transparent dice xD

[@Earendilgrey]

Odd that even with the pressure pot you still get such large bubbles with these. I wonder if a thinner, more flexible silicone in the same designs would limit more of the issues. Probably not though.

[@Rhasputinn]

I'm also curious about the polish on the dice- in some shots it looks okay, but in others it looks a bit poorly polished. Input?

[@Rybonator]

I didn't polish them at all, so I can't speak much to that. It looks fairly even throughout to me in person with no polishing happening.

[@thornwiese3700]

Please please please do a review of the chonky and mini

[@annabarich4712]

In a weak defense of S&T, their instructions specifically say to avoid pressing down on the mold lids because it can cause voids. I think they expect gravity and the weight of the lids to do the work of forcing out the excess resin for you. I'm not sure if you tested that aspect in your offscreen tries, but given pressing the lids down firmly is part of your standard procedure with other molds it wouldn't surprise me if the voids were user error. Not that it would fix the many other flaws you found with this mold set. Given how long production was delayed for this latest iteration of their molds, it's a disappointment all around.

[@geminidragon33]

I'd have to agree. Their molds, specifically their dice molds, are more for looks and coolness factor, than for making actual gaming dice you can play with. Still, it's sad to see the quality is STILL off, even after all these tries. Even if I was going to make one or more of their dice from their molds and make them into a keychain charm, I'd still prefer the dice molds be of a better quality and finish so I'm not spending ages re-casting or sanding dice that are gonna be used for looks as opposed to use in gaming. I used to get S&T subscription boxes all the time, and still enjoy making other things from the molds that came in their boxes. But they are not a gaming dice company, so it's not unexpected that their dice molds are not what's preferred for resin dice making. I'd much rather follow one of Rybonator's tutorials - and have in the past - to make my own sellable and/or playable dice.

[@tuck91]

So Rybonator. I'm 100% new at making dice. Do you have a pre-made mold you recommend? I would love to see the chonky D20 as maybe the larger size will do better? Also you got my sub thanks for the cool diy projects!

[@grimbostink7607]

Oofa doofa, come on soph and toff! Rips to these molds

[@Seelenschmiede]

At the dental technician lab we only work with soft silicones. Hard silicones are not recommended for molds.

[@Flarecobra]

I admit, I'm probably one of the few that'd be ok with a smaller D20 size... but yeah... am really curious about the two others though. Especally the Big Chonk 20 there.

[@rambler209]

Are these molds going to feature on the next Will It Roll Wednesday?

[@Rybonator]

Hehe, I already threw them in this one, but if I get frustrated with the tiny ones, I probably will :P

[@mischiefgoblin9102]

Absolutely please check out the gaint d20 ^^

[@KugoVolarus]

I need you to try micropearls in some dice!

[@lunondisposable5382]

How tf are they so expensive? I saw a listing on their website for ~$12 and thought "eh that's not too bad" but then I realized that's for ONE MOLD.

[@pspadotto]

Thanks for this review, I was going to save up for this set and would have been sorely disappointed. That said, I'm looking for a set of sharp edge dice molds. Can you recommend one?

[@Rybonator]

Dicey Encounters makes amazing molds, I've shown his off in my shell mold videos before, and even have a link in there if you are interested :)

[@pspadotto]

Excellent and thank you!

[@nortonsapple227]

Please check out the chunky and mini!

[@erinjones5382]

Have you ever had an issue with that purple alcohol ink burning during the curing process? Mine (at least with the UV resin) leaves the dice looking orange when you look at it in the sun.

[@Rybonator]

Hmm, no I haven't noticed any :O I have issues with the white alcohol ink sometimes though

[@DrkNinja_]

So to be clear, is the problem with 3 part molds or just theirs? Cuz I feel like 3 part molds would be an awesome idea...

[@Rybonator]

3 part molds are not bad at all! They require a bit more cleanup, but in general get a more consistent product, and last a bit longer. You have to kind of weigh the pros and cons :)

[@DrkNinja_]

@@Rybonator Have you tried the Royal Mold System by Kingsfell? My brain can't wrap around how they made those molds

[@johnbrogan6583]

please review them