Dirac Live: Step By Step Walk-through of the Denon/Marantz Measurement and Calibration Process

[@Saturn2888]

THis is the only video that explains the Volume Calibration page. I've seen so many guides and videos and none of them properly explain this setting. I thought you didn't quite understand either, but you explained that it's to ensure your mic can get a good reading. Wow!

[@_Paul.]

We definitely need Dirac Active Room Treatment (A.R.T) to come out for these next year!

[@Roland-vk2zr]

Thank you guys.I have a much better understanding on how to set-up Dirac live.I immediately went ahead and ordered a denon avc ah10.

[@alexeiantoniuk2622]

Thanks a lot for this video. It helped a lot to set up Dirac! It’s an excellent upgrade.

[@shaolin95]

Find the avsforum thread for the rz50 tutorial. It is MUCH better than this one which has lots of misinformation unfortunately

[@JoeZaccaris]

I been enjoying Dirac on my Pioneer LX-505 for almost two years and it's amazing sound! The only problem is now I want a Denon X3800 LOL.

[@df5485]

Why want the 3800 in stead of pioneer which has fullband dirac included?

[@ricsim78]

@@df5485 Yes, because yes, the Pioneer has full-band Dirac and the Denon, you have to purchase a license for it. Why? Because you can add the bass module to Dirac with DLBC with the Denon, the Pioneer you cannot. The Denon was individual crossover settings for each speaker group, all Pioneers have a master crossover that applies to all speakers.

[@Newtworks7]

I feel sorry for Cam in this video, being asked to add 5 + 2 in a passive aggressive manor. Also why does he have all the Denon gear on, yet knows nothing about it? Weird.

[@invisibles362]

I wish I would of had a video like that à few years ago, it would of make my life alot easier. Good job of explanning the Dirac live set up.

[@Niceaux_B]

Hi Phil & Cam. Such a great video. There's the balance of asking the questions even if you know them, it makes the video much better to follow for simply anyone. Thanks.

[@turnne]

Good tutorial. I recently went from a older Marantz 8802 to another brand that was equipped with Dirac. The set up was almost identical to this, except I had another option for a " Harman" curve built into my unit I am very sold on the fact that Dirac is better than Audyssey I use the wide seating position and I am getting better channel separation and better nuance of sound in that I hear tiny details that I did not hear before

[@JoeZaccaris]

Most people seem to agree that Dirac sounds a lot better than Audyssey --- I wouldn't be surprised if Denon cancels their partnership with Audyssey and uses Dirac as their default room correction for their consumer grade AVRs in the next few years

[@turnne]

@@JoeZaccaris In my opinion , for what Denon/Marantz is charging for their higher end units today , Dirac should be standard

[@PauloPHGTA]

So if I understood correctly, I can have one audyssey calibration on preset 1, and 3 Dirac calibrations with different levels, distances, curve eq, etc…, on preset 2? After selecting one of my Dirac filters can I go back to Speakers Manual Setup on the menu and adjusts the settings like leves and distances for each of my Dirac calibrations? I like the new function on the speaker menu that duplicate the LFE from the subwoofer and sent it to my front towers, can I set this manually to each of my 3 Dirac calibrations too?

[@Colin-tw6xn]

This is Excellent, superb. It is the best description I’ve seen about setting up Dirac. I have the Monolith htp1 with 3 subs and it recently lost use of 2 subs after the latest firmware update,though the subs are working. I believe that I can confidently do the setup based on your description. My head will not be above the back of my chair. Will the microphone pick up my back speakers(2)and the sub behind me correctly? Thanks.You are Great.

[@PetrKrenzelok]

Is the license transferrable? With Audyssey MultEQ-X, it is not. If I sell my Cinema 50, I want to be able to remove the license and transfer it to the new unit.

[@con6164]

Multi EQ X lives with the unit for life. If you sell your AVR/AVP it is transferred to the new owner. I have recently sold my AVP and Audyssey organised the transfer of the license to the new owner once I contacted them to confirm I sold my unit . Ideally it would be nice if he license stayed with me.

[@curtispoling4966]

Thank you for this very helpful tutorial.

[@bobsmith1841]

Great walk through!!

[@mattgiunt]

Excellent-thank you

[@EdUwadia]

As an audiophile with a system featuring dual 16-inch subwoofers (SVS PB16 Ultra and Monolith 16 THX Ultra), I had high expectations for Dirac Live and its Bass Control module. While Dirac excels at clarity, precision, and creating a balanced soundstage, it falls short in fully unleashing the potential of high-performance subwoofers. Pros: Exceptional Clarity: Dirac delivers crystal-clear sound, with tight integration between speakers and subs. Room Correction Accuracy: It does a fantastic job managing room modes, ensuring no boomy or muddy bass. Customizable Target Curves: The ability to modify frequency curves is a welcome feature for tailoring sound to individual preferences. Cons: Bass Taming: Dirac often over-corrects bass, making it sound overly restrained. For dual high-powered subs, this approach can feel like it’s holding the system back. Lack of Enthusiast Modes: There’s no built-in bass-forward profile for those who prefer a more cinematic or music-focused experience. Complexity: While powerful, Dirac’s interface and adjustments can be overwhelming for users who want straightforward enhancements without spending hours tweaking. Final Thoughts: Dirac Live with Bass Control is an incredible tool for audiophiles seeking precision and balance, but its default approach doesn't fully cater to bass enthusiasts with high-end systems. With manual adjustments to the target curve and subwoofer levels, you can regain the visceral impact your system is capable of. However, it would be great if Dirac introduced more intuitive bass-focused presets or better integration for massive subwoofers. For now, it's a great starting point but requires work to achieve the full potential of a truly immersive system. Rating: 4/5 - Outstanding clarity and correction, but too reserved for bass lovers without extra tuning.

[@mehAudio]

Thanks, gentlemen. Very helpful, indeed!

[@jmmontegnies9311]

Amazing vid! Thank you for those very clear explanations about Dirac. I have a question. What about the distances? Do we have to measure them manually before beginning with the calibration or does Dirac self measure the distances? If we have to take the measurements manually first, how can we take into acount the delay caused by the DSP of many subwoofers? Thank you.

[@bobsmith1841]

Great question I hope they answer!! I wonder if it would make sense to run audessy first, then dirac..

[@tommitchell4570]

You don't have to measure any distances with Dirac calibration --- the only thing that is important is to make sure all speakers are properly wired (polarity) and in correct positions (ie, front speakers are not wired up as rear surrounds, etc)

[@jmmontegnies9311]

@@tommitchell4570 Thank you very much.

[@SoundUnitedTraining]

@@tommitchell4570 Yes, Tom is correct Dirac automatically calculates distances. Due to a firmware update a few months ago, Dirac Live nowinclude Bass Management so it automatically crossover points on Denon/Marantz AVRs

[@bobsmith1841]

When does dirac bass management come out? Will it be compatible with the dennon avr 4800?

[@luckymckay]

Great video. I've found a bug with the MultEQ Editor app on my denon 3800h when using multiple subs. When using the OSD audysee setup through the receiver, Audysee correctly measures my subwoofer distances at 3 separate distances. However, when using the MultEQ Editor app, audysee measures the response of all 3 subs, but instead set the subwoofer distance of all three subs at the same distance as my sub that's located the farthest away. For example, directly through the receiver, sub 1 is 15.6 ft, sub 2 is 15.9 ft, and sub 3 is 23.8 ft. Through the Editor app, all subs are set to 23.8 ft which skews the subwoofer response prior to EQ being applied. The only way to change the distances to the correct distance is AFTER EQ has been applied, which is not ideal as the frequency response is drastically changed by setting the distance of subs to their correct delays. Hopefully this issue can be corrected, as the benefits of using the Editor app for the rest of the speakers made a huge difference! Live the sound, but I know my sub eq is "off" after changing the distances post EQ being applied. Thanks again for the great video.

[@marvinabugov4579]

This video is most helpful! Thank you.

[@emeraguirre4234]

very well said, complete and detailed. Tnx

[@texxhexxmm]

How can i Go with lesse meassurements?? After 6 i Go to Filter Design but it does not ask Go with 6!

[@kerzytibok3211]

I guess the obvious question is --- does Dirac sound better on a Denon X3800H, Pioneer LX-505, or Onkyo RZ50? All these AVR's are priced roughly about the same.

[@mauriciob8260]

I have the Pioner Elite 505 and after DIRAC calibration sound amazing but if you want independent subwoofer and crossover go for the Denon X3800

[@tonyg9174]

Question about the Dirac license, I currently have a Marantz Cinema 40, but may return it for the Marantz AV10. If I purchase a license for the Cinema 40 and exchange for the AV10, will the license swap over?

[@11eagleye97]

I talked to dirac and they swapped my license from cinema 50 to 40 as i returned 50 for 40.

[@tonyg9174]

@@11eagleye97 Good to know, thank you for the reply

[@smudell]

The volume calibration section of your demo was the missing piece for me... thank you!

[@yiurock4084]

Still waiting for dirac active room treatment for the x4800h

[@Exalix]

I did Dirac Live calibration on Cinema 40. Why are levels set to 0 db and distances to 0 ms???

[@UnitedRedDevil13]

Did you ever figure this out? Same issue with me Denon. Any tips help. Thanks.

[@Exalix]

@@UnitedRedDevil13 I really can't remember exactly. A new firmware came out and I did new calibratiion at it solved the problem. Make sure your sub is on all the time, not auto.

[@miguelmunoz1713]

Amazing video thanks

[@bobsmith1841]

Will Auro 3d be dirac capable in the future? Planned date?

[@kwokhungleung8793]

Thanks Compare the sound which is better? Direc or audessy? How much the improvement? Thanks

[@brysonfitzgerald5238]

I know it's over a year later, but my opinion is that Dirac sounds much, much better, and it really isn't even close. With my equipment and my room, the best analogy i can think of is that the difference between them would be like comparing cassette tape audio to CD audio, with Dirac being the latter. And, I put significant effort into Audyssee. I just simply could never get the level of improvement that Dirac provided, with much less effort to boot.

[@michaelmock4894]

Does Dirac have some feature for curves of Equal loudness (Fletcher munson) like audessey dynamic EQ?

[@SoundUnitedTraining]

Dirac does not offer a feature similar to Dynamic Volume. We suggest doing an Audyssey Cal with Dynamic Volume engaged and saving it under Speaker Preset #1. Then you can quickly switch between Preset #1 (Audyssey) and Preset #2 (Dirac)

[@michaelmock4894]

@@SoundUnitedTraining of corse I meant dynamic EQ. That is too Bad. Without something similar to dynamic EQ this makes Dirac basically unusable for many people.

[@ericshutter5305]

@@michaelmock4894 some people use a night and day setting on Dirac. 1 with their preferred settings for regular views/listening and 1 for quiet listening at night. not ideal but for me it will be enough. I never use the Dynamic volume/EQ from Audyssey so I don't loose anything.

[@michaelmock4894]

@@ericshutter5305 According to your answer you obviously have no idea what damit eq does.

[@JonMoralesLA]

@@michaelmock4894 Why don’t you inform us on what Dynamic EQ does then?

[@amigosdohometheater5140]

Hello everyone, I recently purchased a Dirac Live license for the AVR DENON 3800h but I didn't see any advantage in having paid $350, so I would like to know if Direct will provide refunds? I really appreciate for your help, have great day 😄

[@6jsalva]

You have to go through the settings so you can see the different in Dirac life

[@brysonfitzgerald5238]

If you don't hear a difference then you have done something wrong

[@deadline7610]

Nicely Done.

[@MrJonJuggler]

Is there a way have use Dirac with 2 speakers configurations? I have 5.1.2 but sometimes like to run 5.0.2. I can't see a way to do this?

[@jeremyarmon3005]

On the speaker connection screen, what does Speaker+Pre-Out mean? I thought it was an either/or setting. Thank you.

[@wbean8802]

best demo

[@Undee-or7sb]

I cannot adjust the Master Volume via Dirac Live (Denon X3800H). I dont know why. And I can also play just one Front Speaker, if i select at first the right speaker, i can only play the test tone from right speaker and other way round. I use 5.1 Bi Amp, i did every setup... I just use the normal 5.1 Setup. Switching to 7.1 and other stuff didnt help. What should i do? How to configure the windows 11 right for dirac?

[@karlamarx2547]

Will I have to do new additional profiles for Auro-3D and DTX? What about the Front Wides on/off? What if the subs are not lumped together?

[@Altyros]

What exactly does the middle signify and what its importance? I tried using a level audio meter as you would normally for volume levels per speaker but not sure wth I'm looking for on or targeting on the volume section in dirac

[@ts2ts516]

I have an A1H waiting to use it, but I'm afraid the effect won't be as expected.

[@11eagleye97]

any tip on getting the enough and tight bass from my svs sb3000 pro. I have marantz cinema 50 with Focal 900 series 5.1 and SVS sb 3000 pro but not getting enough bass even after following all the steps mentioned by you. Thanks

[@codyscharkey-gd1sz]

Your room might be the issue. What is the H/W/D of the room? If it is to square or like ratios you might be not be able to fix?

[@11eagleye97]

@@codyscharkey-gd1sz it’s kitchen and living room combined. It’s an apartment. The size is 20x12x10

[@slofty]

@@11eagleye97 You sound like a _great_ neighbor.

[@brysonfitzgerald5238]

​@@11eagleye97when you run the Dirac calibration, immediately export a test filter. Go into the Denon setup screen and go to the Audio->Subwoofer and check to see what Dirac has determined for your subwoofer level. You want the Direc to set the Denon's subwoofer level at -6 or so. It may take a few tries. Adjust your subwoofer level on the subwoofer and if you are using an amplifier for your speakers, you can adjust those as well (relative to your subwoofer) until you get about -6. You don't want your subwoofer volume knob to be much more than 50% during the calibration, and you should be able to get -6 while doing this. Once you do that, you can boost the subwoofer levels by a few dB in Dirac, and then after you export your filter and you still want more bass, increase the volume knob on the subwoofer until you are happy. I have an SVS SB3000 Pro and it should have no problem pressurizing your room size, as long as that roof is completely sealed with closed doors and closed windows.

[@StealthBlazer]

so my question is... do u level calibrate ur subs with audessy? an leave them the same for dirac ???

[@SoundUnitedTraining]

I would leave the level set by Dirac. However, it is based on personal taste. if you desire more bass, you can increase the output in several ways. #1 Using the knob on the back of the sub. #2 increase sub-level via the AVRs option menu, #3 Build a target curve with the bass elevated.

[@StealthBlazer]

FYI i saved my dirac on preset 1 (by mistake). an still have all 3 slots for profiles & preset 2 has my audessy profile...

[@ericshutter5305]

When is an update available for the found issues in last update with Dirac Live ?? Like the 20ms maximum delay which is unusable for a lot of people with (multiple) subs around the room.

[@StealthBlazer]

think that problem is only when ppl are using wireless adapter for one sub.. had the same problem.. ran RCA for my rear sub.. an the 20ms delay problem gone

[@ericshutter5305]

@@StealthBlazer true. had that also and solved it in the same way. but the 20ms delta means no sub/speaker can be further away then 6 meters. there are people I know who have bigger distances or don't want to use cables. both situations need more then 20ms. so it's a serious issue as that means Dirac is not usable 😮

[@StealthBlazer]

@Eric Shutter gotcha. Just glad it was an easy fix for me. Spending 350$ on software u can't use with ur setup not good.

[@williamhicks2763]

Why three slots and not 8 or 16? I had a salesman almost bragging it had three slots. The HTP-1 has 5. It seems like for the cost of a $5 thumb drive you could give the users enough storage space to do as many as they want.

[@janthomassrensen1065]

Thanks for the comprehensive walkthrough, very interesting stuff :-) I have the Audyssey MultiqX for my Marantz 8805. While the interfaces differ, it looks as if the 2 programs are doing the excact same thing. So how are they different? I was under the impression that Dirac was better than Audyssey. Judging from this presentation they appear to be very identical

[@ericshutter5305]

the user interface doesn't mean that the software (internally) does the same thing. Dirac has different functionality. Not identical at all.

[@bobbyDig]

I own both and Dirac does better room correction than Audyssey.

[@WillyLax24]

The main difference is that Dirac adjust the phase and Audessy does not. I have tested both on my Denon AVR 4800, and because the Dirac can adjust the phase, I get almost perfect integration between my two subs and my main speakers. With Audessy , the two subs and the main speakers, cancel each other out at certain frequencies, causing a major decrease in overall bass. Yes, I can adjust the phase on my subs, but this applies to all frequencies the sub plays, so while I can get decent integration at some frequencies, I am not getting good integration at all frequencies. With Dirac, the overall sound of my bass is now way better and my sub amps are putting out way less power as the speakers are properly in phase and not fighting one another. That being said, very frustrating that Dirac does not have any type of loudness compensation or night mode like Audessy.

[@janthomassrensen1065]

@@bobbyDig Have You compared Dirac to the Audyssey MulteQ-X or just the in-amp Audyssey? The 200 dollar Audyssey app has far more options than the preinstalled version.

[@janthomassrensen1065]

@@WillyLax24 You shouldn´t let your main speakers and subs overlap. The mains should be cut off at 80hz and the subs handle all of the bass. Being set up that way, the main speakers wont be fighting the subs.

[@bobbyDig]

Guys, why won't my cal file load on my MiniDSP UMIK-1? It loads in REW. Any advice would be great.

[@talkingwithcars]

Silly question, do you recommend performing the Audyssey setup prior to DIRAC? Confused about sequence. Or does it matter and can I go directly to DIRAC out of the box...sorry

[@brysonfitzgerald5238]

Don't overlap them. Don't run Audyssee while performing Dirac Calibration, and vice versa.

[@texxhexxmm]

I Couleur Even use 6 presets Wehen i also Uwe a configuration 1 and 2 ?

[@czwhat328]

When will we get Dirac Bass Control?

[@4rings5cylinder6gear]

What happens to my DIRAC license if my Denon goes broke and i need a new one?

[@syntheee]

My Denon X3800H went faulty just after a week. I issued a ticket to Dirac support and they refunded payment for my licence immediately.

[@bobsmith1841]

So... i was ready to buy, but... my computer is in the otherroom, and the cable of the mic is only 6 foot so it wont reach from the avr to the main seating position . So I'm stuck with audyssey...

[@boterhammetpindakaashagelslag]

USB extension cable

[@brysonfitzgerald5238]

They make these things called long cables. Look them up!

[@dirks6006]

Are the speaker pairs linked/concatenated in Dirac or are they manually correctable individually? (this is not clear from the video)

[@carlosaponte44]

It will usually pair like speakers (fronts, rears, etc). However you can easily split them and work with them individually.

[@SoundUnitedTraining]

Carlos is correct, if desired, you can adjust each speaker individually or as a pair,

[@carlosaponte44]

I should say group instead of pairs. You can also upload custom curves per group.

[@mischugo]

That's exactly what I was looking for. Thank you very much. Just like in the classroom 👍🏻 The first calibration worked perfectly. Great sound. But I can't find any answers to one question. I also have 2 speakers on my Denon for stereo (music) only. Layout: 7.1 channel + front B. These are connected to the Height 2. But the speakers are not taken into account by Dirac. What can I do to calibrate these speakers as well?

[@mischugo]

Any idea meanwhile

[@brysonfitzgerald5238]

​@@mischugoyou have to choose the 9.1 option in the Denon "speaker layout" page. Dirac will then look for the extra 2 speakers.

[@mischugo]

@@brysonfitzgerald5238 Thanks! Will try that.

[@brysonfitzgerald5238]

@@mischugo it's a little wonky because Dirac expresses the layouts as Floors.Subs.Heights (example = 7.2.4), while the Denon expresses the same layout as Floors+Heights.Subs (same layout as Dirac example above = 11.2) Hope this helps explain the logic a little better.

[@tpthaler]

Where are you getting a steak or lobster dinner for only $30? Also, FWIW it's forward slash not back slash.

[@richardmyers7181]

Hello sirs have you any idea where i can get my marantz sr 7013 repaired I live in Ireland and my Dina say is there no one left in sound United either support or repairs so can you help or anyone that is looking Would anyone have an idea where I can get my repairs done there is no support from sound United and I'm sure the repairs for Europe are gone as well anyone that can help

[@chris5375]

Thanks 👍🏻👍🏻👍🏻

[@TheRealCompensator]

Well explained why there is no DiRac native to the Denon and Marantz. I was wondering about this.

[@dirks6006]

How many cycles does Dirac use for the correction ?

[@ericsin2574]

Why denon avc-a110 cannot have dirac update since is a high end equipment?

[@Totalplonker]

Sorry to burst your bubble mate but Denon is not high-end. They may say there high end but they don't produce a high-end sound.

[@texxhexxmm]

Dirac live with my Marantz Limited the Subwoofers automatocally at around 150hz! Is that normal? Of course i have the full version ;)

[@brysonfitzgerald5238]

Subwoofers should not play above 150hz, if that's what you are asking?

[@stevenmorris5546]

Hi Guys how would a Tactile Transducer fit into the mix ? I have a Denon 3800

[@treyshiznit]

Transducers are typically piggybacked to the subwoofer connection so no additional adjustments are required for it.

[@robertstevens1507]

looking for a advance use and setting tutorial?

[@GamegsterDad]

Aren’t you up the prices for all your receivers at least $600-$700 compared to pre pandemic prices, why arcam, pioneer, onkyo, integra, can offer it free including mic and you passing on costumer cost of mic and cost of license

[@bobsmith1841]

So when calibrating do you leave the seating in place?

[@brysonfitzgerald5238]

Yes. Leave the room exactly as it will be when listening. EXACTLY.

[@florisbackx1744]

The fact that the 'licence' is limited per actual device is insane especially seeing the cost to purchase one.

[@LordofKings-Raj]

I have Yamaha AVR 😊

[@m4nc1n1]

I love Marantz and have been loyal for over 15 years. But it is very disappointing that my Cinema 30 was $4500, and I need to spend another $700 for Dirac when people can get a $1000 Onkyo, which comes with it. I have bought the SR5008, SR6009, SR7008, SR6013, AV7705, MM8077, MM7055, and now the Cinema 30. It makes me want to return the Cinema 30 and hook my 7705 back up. A Dirac code would be nice if included for Cinema 30 and AV10 flagships.

[@djavoizkrsaful]

Onkyo have Dirac live built in licence included in price! Did you have idea how many people would take Onkyo or Pionir and not Marantz/Denon only because of Dirac? Its only yours money hunger!

[@JoeZaccaris]

I agree that Onkyo not charging for a Dirac license is nice, but I think market competition is good --- for example, many consumers want more than three Dirac filter slots in their AVR, so now Denon, Onkyo, and Pioneer can all compete with each other to expand the slot count

[@MaxTheMiracle]

As much as i love all of this, i think its too much for the same, and knowing a bit too much of this, and the calibrated methods used in the mics, i have to say that IF you hear differences between them, you will be hearing this differences between the Calibrated Mic and the other Mic.. The logic behind all of this, is to sound same at exact same Place, so how would one sound different than the other? Im sorry for the ones who buy this only for the sound, Me i buy them , because i LOVE seeing Sweeps draw in my pc :)

[@williamhicks2763]

It’s a good point. If you could use the calibrated mic for both it would be a better comparison.

[@GoldenMean743]

I just think Denon should keep the damn logo off their box and device if it is an "upgradeable option."

[@jdm724]

2 subs... but there is no dirac live bass control.

[@StealthBlazer]

coming 2024 for extra cost

[@janthomassrensen1065]

Will be available early 2024 for approx $450 extra

[@StealthBlazer]

@@janthomassrensen1065 ouch = 800$

[@janthomassrensen1065]

@@StealthBlazer Yep, that´s pricy.

[@brysonfitzgerald5238]

There is now

[@m4nc1n1]

Forward slash / (websites do not use back slash \)

[@ddcrocky3831]

I wish you can use your phone

[@wezzman1]

D&M needs the through the extra mic in the box for good measure, after spending over £1k on the AVR and then have to shell out £300 for Dirac and an other £100 for a mic. If Pioneer/Onkyo, Arcam can do it you can too....stop being cheap gits.

[@boterhammetpindakaashagelslag]

Sounds like you are the cheap git. D&M receivers have a low price for a reason. Arcam, Anthem etc are twice the price.

[@wezzman1]

@@boterhammetpindakaashagelslag you're damn right I am a cheap git, bang for buck I say. The Onkyo RZ50 is cheaper, sounds better, have Dirac in the box and a mic. If you want to spend more money and get now't for it, you go on brother. again, this is why D&M makes cheap shite and changes so much, cause you lot let them get away with it. My money is better in my pocket fella.

[@boterhammetpindakaashagelslag]

​@@wezzman1Onkyo 🤣 You get what you pay for. Simple as that. Onkyo < D&M < Anthem < Arcam.

[@alh5470]

this sounds complicated... sticking with my s970h cuz im a simpleton.

[@RetroMythologist]

It's not shown here, but the full "bundle" is $600!! I've had no problems with Audyssey; I'll pass.

[@whole_caveman_or_lions_den]

Ah so you get forced a steak and if you want the lobster you have to buy the steak as well... Great restaurant!

[@SoundUnitedTraining]

Audyssey fits the needs of most of our customers looking for a simple setup solution. Adding both licenses would have increased the price for everyone., but we wanted to give users the option to choose Dirac.

[@whole_caveman_or_lions_den]

@@SoundUnitedTraining I know, I just thought it was a bad analogy 😉 I just received my X3800H today 😁 great machine! Even without Dirac, just would have liked to know that the Audyssey app was paid as well, but I don't think I'm missing out on much

[@whole_caveman_or_lions_den]

@@SoundUnitedTraining One mayor annoyance; controlling the volume with the remote is either too slow when you go step by step, or waaay too fast when you hold the volume up/down button, volume down would be fine too have go fast, but volume up should never go that fast!!! My cat could literally walk on the remote and blow my eardrums if I don't put the remote away safely and I'm not near the receiver (and yes it'll overpower my speakers and might damage them, I can easily hear them clipping at high volumes even with the volume limiter, and I'd not say they're bad speakers (Teufel ultima 40 5.1)

[@rts100x5]

Audessy is a JOKE ..... don't even waste your money or your time using it ....

[@JarwuahZ.Belizaire-wp4hw]

If you need a better Dirac service, get the Onkyo RZ50

[@aussie8114]

Too complicated, too expensive.

[@hannu.kalkaja]

How much delay you can add to speakers.. Oh wait you will hit the brick wall. Thanks for ignoring this fact.

[@mercer29-4]

So does direc live also set speaker levels spl, distance, etc.?

[@SoundUnitedTraining]

Yes it sets to parameters, but it currently does not offer bass management so you will have to determine speaker size and crossover points manually.

[@UnitedRedDevil13]

@@SoundUnitedTrainingso we don’t have to manually enter distances or level match all speakers before running Dirac? I ran for the first time today and i got red exclamation points on quite a few speaker measures. Distances & levels all read 0 after importing to Denon. Thanks in advance.

[@brysonfitzgerald5238]

​​@@UnitedRedDevil13no, Dirac does all of that automatically. There is some other problem. I have never received red warnings like you state.

[@LEMON48]

One question , is there any sense to use this MiniDSP Unik 1 to measure for AUdyssey calibration to achieve better results than defoult mic ?????

[@SoundUnitedTraining]

The MiniDSP UNIK 1 is not compatible with Audyssey. Since the mic calibration file is built into Audyssey (Receiver, Mobile app and MultiEQ-X software) the included mic works perfectly fine,