SOURCE BMX: CHASE DEHART / BIKE CHECK

[@kikogomezbmx]

This is the longest I’ve seen chase talk! His set up never changed ! Love it! Sticking to what works! 🔥🔥🔥

[@dragonflyBMX]

Van hosting bike checks is honestly perfect.

[@MovezLikeDagger]

Finally blessed the bmx world with a Dehart bike check! Love the way you went into great detail and pryed for the breakdowns of why he rides what he rides. Super insightful. Thanks for doing this guys! 🤘🏻

[@MovezLikeDagger]

How tall is he and what size top tube and crank size?

[@chasedehart]

Hey man thank you, I am exactly 6 feet tall, my frame is a 20.75, and my cranks are 175mm.

[@MovezLikeDagger]

Holy shit. I was pretty sure you were around my height between 5'11 and 6'1 just by seeing you next to other riders, and I've been trying to tailor my setup to what I thought yours might be because I was always inspired by your riding, but I would've never guessed you ran such a small frame. I would've guessed 21.25 or 21 at the least lol. You somehow don't make it look like you're cramped on a small bike at 6ft tall like I did when I tried to run a 20.75. Appreciate the feedback man 🙏🏻

[@twentytolife4401]

I still ride a Cult Dehart slim seat they did years ago. CULT PLEASE MAKE HIS OLD SEAT AGAIN. Sick bike. Simple yet effective.👊

[@Blumpkinninja]

If you want a seat that is very similar to his old seat check out the fly Larry Edgar seat 🔥

[@SchnellVITALVINYLVLOG]

Still riding a old Fit Dehart/Eddie Cleveland signature seat!

[@TheFakeMackie]

Van channeling Joe from sneakershoppin. Really good questions and discussion.

[@sourcebmx]

haha true

[@ej1_drew]

van homan is the right man for the job!!

[@sourcebmx]

Glad you're in to it

[@aureliomangrichfilho1222]

classic and clean setup! i love this way

[@klyeleegunpla4313]

Top riders while growing up ever since his mosh bikes vid part

[@paccobmx]

Chase personifica el estilo! Siempre limpio 🔥

[@CodyCobraSB]

🙌🤲👏🙌 Vans got his own hand signing

[@christianashleyronquillo1866]

Van is really perfect! Questions and discussion about the parts are on point 🔥

[@sourcebmx]

Thank you! - Van

[@mr.blonde66milkyway66]

*Source 1000 points of light🕯️BMX🤘👁️👌*

[@psilocybinridin]

one of the best feeling frames

[@sole__doubt]

Love how he mentioned tire pressure. :)

[@DeadMemories86]

Real bmx og, and van also

[@davidnemcsik6581]

ALL TIME FAV RIDER !!!

[@sourcebmx]

One of the best!

[@eduardomorais3132]

Quality content

[@chryslertechnician3439]

Legend and always keeps it G🇺🇸💯💯

[@Tlynch4130]

One of my favorite tires ever for sure !

[@hectorpinol7951]

To whom it may concern, did Bsd donnasqueak bite of the Dehart tire? Because they very similar. Great bike check, Van is thorough wit it! Love it.

[@chasedehart]

They did haha, but it’s all good, I would bite it too, it’s a good tire.

[@hectorpinol7951]

@@chasedehart True that I ran them DH tires all colors!

[@josh1alderete]

Love chase such a good dude 💪🏽

[@sourcebmx]

Agreed!!

[@White_Court_Barbershop]

I want that hoodie chase has! What up CULT ✌

[@davetbassbos]

These are great, I think because BMX agreed on standards and compatibility a while back you can get a lots of subtle variations in frames and parts to get what you want. definitely not the case in the MTB and road bike world.

[@sourcebmx]

Glad you like them

[@ej1_drew]

my buddy had a first generation sunday wave and everything fit right on ! meanwhile i got a new mtb bc my 2017 i's outdated already XD

[@heitormorgado]

wow churchill still got signature parts

[@AMM1998]

Stevie's a legend he deserves it

[@benrawson6684]

Two legends

[@sourcebmx]

Yup!

[@BOOMBIKE]

Nice bike ❤

[@eyeshredbmx]

The man!

[@LumberDAK]

I'd love to see dehart riding trails!!!

[@sourcebmx]

Same here!

[@wildmanwillis2183]

Most people wouldn’t know you whent down one dirt jump lol 😂

[@chasedehart]

He said, “ Dabble in dirt jumps “.

[@fabiofilippin9140]

The gap to wall to manual 180 wasn't a bikecheck level line!

[@emilynading7576]

Sick setup 🔥 Chase you run the 25 or 28 Dak sprocket? Can’t quite tell 🧐 Thanks!

[@sourcebmx]

25!

[@pirate_duck4985]

55-65 psi = Perfect! 100psi leads to wrist issues, if you go under 35ish you'll get blow outs, smash your Rims & end up on your arse haha.

[@Mike-qf6zk]

Two legends! Yo Chase, what version of your stem do you ride and do you gotta cut down those forks to slam it?

[@chasedehart]

Yo man, I run the 48mm version of the stem, and I do have to cut my forks down to slam it, I usually just use a grinding wheel or a big pipe cutter if I have one. Thanks.

[@sourcebmx]

New Bike Check just dropped: kzbin.info/www/bejne/r4Spo4aGqpx0fLc

[@robalexanderofficial]

Street legend

[@sourcebmx]

For sure!!!

[@cliffsrandomness15]

What is Chase’s height? And what size top tube? I’ve been looking at this frame wanting to get it but haven’t pulled the trigger.

[@chasedehart]

How’s it going man, i am exactly 6 feet tall, and my frame is a 20.75, I’ve been running that size for as long as I can remember, except in 2006-2007 I tried out a 20.5 for a bit. Hope that helps, thanks.

[@cliffsrandomness15]

Thanks for the reply man. Great to get it straight from the source!

[@DnB-BMX]

Saving for later

[@chryslertechnician3439]

OG

[@Undervlx]

great video, soundtrack name please?

[@Pedalgrinds]

OG 2x4

[@denisostapenko856]

Fire

[@jordanwilbert_]

Come back Stevie Churchill!

[@user-xe9ug1qm6g]

bro what is that park

[@bobbymyers9030]

I have those grips and they last.

[@g1xo]

im gonan be so honest rn i'm on my 12th pair of dehart grips in a row and there's a reason for it.

[@ryanevans795]

There must also be a reason you continue to buy them.

[@g1xo]

@@ryanevans795 yeah beacuse there comfy n durable

[@chasedehart]

That’s awesome man thank you for the support, when I say they are my favorite grip I’ve ever tried, I genuinely mean it, glad to hear they’re working out for you too.

[@matyasmarok2135]

The crank size?

[@Mike-qf6zk]

175

[@mattskir]

what size frame?

[@booitsnick]

I think chase has always ran a 21 but he might have went down to 20.75

[@chasedehart]

The frame size is a 20.75, sorry I didn’t specify that in the video.

[@matyasmarok2135]

And the tire size?

[@chasedehart]

The tire size is 2.4 front and back

[@juancoo6481]

@@chasedehart chase can you tell me what bars you is it?

[@psilocybinridin]

chains backwards tho

[@chasedehart]

dude how did I not catch this building it up haha, thanks.

[@psilocybinridin]

@@chasedehart just messin dude that wallride combo was nuts 🔩

[@seangoff9578]

Lol chose the cranks cuz they hold up. Cult cranks not holding up to the job? 😂

[@Mike-qf6zk]

He rode the Cult Hawk cranks for a long time before Primo, they obviously hold up. The Churchill’s are 24mm, bigger than industry standard, that’s why he emphasized their durability. Only a cpl companies make them that beefy, his sponsor Primo being one of them and it’s the only part of theirs outside of his wheels and signature grips so I mean, why wouldn’t he?

[@seangoff9578]

Well, what I was trying to point out is that they’re stronger than Cult cranks and thanks, you just confirmed it. Also, most cranks in the industry are 22mm so I don’t know where you’re getting your “industry standard “ facts from But they’re not the standard in the bmx industry.

[@Blumpkinninja]

I just got fly doleman 2s in 24mm. 19, 22, and 24 are all standard but most people aren’t going to bend a 19 never mind a 24

[@booitsnick]

Van is god

[@devandickey9095]

Nah just playin I ride dehart frame its an older one but I shortened the backend myself with a grinder just took the axle slots in the droputs far forward as I could without hitting the weld