How to make custom hatch pattern in AutoCAD with Superhatch and pattern file

Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad...
In this video, I have explained two different methods of making a hatch in AutoCAD, one with Superhatch tool and another with a type of pattern code which Autodesk uses to make its default hatch patterns.

[@sourcecad]

Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad-essentials-course/

[@mohammadsharique7449]

this was very helpful for me, can you please help me with a code for rectangle of a size of 2x3.. i used chat gpt but it could not write a correct code.

[@makinbacon919]

This helped me so much man, thank you! At my job, I needed to create a very specific pattern of bricks to run across certain sections of wall on the construction plans. I figured it out within the first 5 minutes of the video, awesome!

[@timothypuccetti4852]

Nice job. It helped me to realize that the x, y coordinates of the second row of lines began where the first line ended (rather than form the origin).

[@AlbrechtJ]

Thanks for good tutorial. Very clear explanation.

[@larryemmert3222]

Great introduction of coding!

[@Songoku-ov1gr]

A very nice lesson as usual.

[@Jika-Qureshi]

really helpful am also looking for it . i appreciate... thanks man

[@jamesbell8861]

Very exciting lesson here !!! Thank you. One question ... How would I define an arc ? For instance, if I wanted to simulate a waves pattern to maybe show a WATER FEATURE on an architectural drawing. Thank you. I am taking AutoCAD in school and it is all still very fundamental. I want to learn faster so I will be exploring your courses once I am a little further along. I would be interested in supporting you channel as well. I will need to figure out Express Tools for download first now.

[@susanavalido6744]

great video! thanks, Sourcecad

[@plescacosmin652]

Thx man. You explain very good :)

[@santhosh_kumar_R]

Hey man , u r best in teaching Kindly make a seperate video of program behind AutoCAD

[@Leinner16]

Thanks for the explanation. I think it would be more illustrative if you didn't use only "2" for the dimension, it gets a little bit confusing having the same lenght and offset all the time.

[@giovannidannynkoghoovono3971]

Ty I got my first divine because of you

[@handeyalcn8313]

great video thank you

[@rosanaterracina1517]

Hi, this is very helpful! But I also got confused being all "2". I need to do a hatch for a 9x72 wood plank staggered flooring. I got to do the rectangles, but when I try to do the staggered portion.... it didn´t work. How would be the string to it? 0, 0,0, 72,9, 72,9 90, 0,0, 0,72, 0,72 I feel absolutely lost! Many tanks in advance.

[@mamushmunea2349]

Thank you so much for your good deeds. Thanks

[@maabusubhanishaik]

Great explanation

[@mauriciotrujillo7029]

Excellent presentation, how do make a grating pattern?

[@zhorchlyh4580]

Do you have any idea about the command equivalency 'SUPERHATCH' for Autocad LT 2021 please?

[@yatun944]

Very good, thanks,

[@prabinbikramk.c.8725]

thanks for such informative video BUT what if I want eclipse instead of lines

[@R15HI]

You can create a block with desired dimensions of ellipse and use it in superhatch command.

[@kokosbolls]

Is it possible to use decimals when typing the coding? E.g. 0, 0.03,0.03, ...? Following question: it seems it should be possible to code squares as well. I'm trying to code a pattern with squares with a specific spacing between the squares, but don't seem to get it right. Is this possible?

[@artisticpaversmfg]

Hello. That was a great tutorial. Can I save it as PAT file?

[@Ruftinator]

Weird question maybe but I'm honestly having a bit of a hard time figuring this out. Is there a way to create a hatch pattern consisting of lines that is spaced differently? Let me explain, I'd like to make a hatch pattern for systematic walls. To do that I'd need the first line to be 600mm from origin and the second to be 660mm from origin. I'm not sure if I'm doing something wrong but I just can't seem to figure out how to format the Hatch code to make this work. Could somebody maybe help and explain?

[@orlyperilla8246]

@sourcecad How about creating solid hatch and an open area like checvron type?

[@danielatagbuzia4350]

Can you make curves sing the notepad?

[@rurouni_xyz]

THANK YOU

[@krg8555]

you are super teacher

[@paridesaraceni4015]

the length of this video to explain how to get a simple function sorted out highlights how faulty Autocad culture really is.

[@atlorindia3515]

excellent

[@fazalrabbani9148]

THANKS

[@abdulsattar9167]

nice sir

[@gdblackthorn4137]

For those who may be having problems, verify that you have typed everything exactly as is shown. You can then make your corrections, but in order for autocad to take those corrections I had to first close and reopen autocad. Then it worked fine... It was driving me nuts...!

[@user-ip3cp5di5h]

hi do u know the meaning of a negative delta x or y?

[@mdruheafroj7365]

If I want create a pattern with picture and that would be editable like I can change. Scale or angle so how to do it

[@abhmd9]

Sir make a Vedio for 2d drawing of Bolt front view and side view

[@pzarc]

What if there is no offset gap, as in a rectangle or square? Did you by mistake put a period in place of coma for the diagonal line? The third line.

[@R15HI]

You too spotted it :D, I think yes, that is why the diagonal line did not match the earlier pattern!

[@ReoCAD]

Nice Video .... #reocad

[@ivoryhand]

Very nice tutorial would have been more helpful if you 2,4 different height and width. As everything is 2,2 so a bit confusing

[@user-ip3cp5di5h]

hi do u know the meaning of a negative delta x or y?

[@sajjadhossain2372]

sir can you tell me how can i create brick wall custom hatch creation.

[@brandongutierrez7105]

Hi¡, your video is great (Y), but I have a doubt about the superhacht, can I change the color on background on it, because I can´t, I try to put it and just paste the superhacht lines or figures (whatever) but I can´t change the color behind, could you help me? someone? I´ll appreciate a lot.

[@R15HI]

YOU CAN ADD SEPARATE SOLID FILL HATCH IN SAME REGION USING THE BOUNDARY

[@lajpaallajpaal8026]

Thanks but i can modify and also copy paste super hatch to other file too i try and it's working u said not transferable

[@imtiyazahmed4855]

Hello Sir Please Make A Video On Tiles Hath Creating eg 600x300 MM Tiles and Gap between two Tiles is 2 MM So please make a video on this topic.

[@user-ip3cp5di5h]

what is the meaning of negative delta x and delta y??

[@aengnr1]

What if i want to draw circles using notepad

[@larryemmert3222]

Rivella, I'm trying to create a hatch pattern called Gravel2. How can I code this? I can send you a copy of the pattern. Thank you Sir.

[@susanavalido6744]

you can had any code in acad.pat and/or acadiso.pat files (always keep an original copy, just in case it stops working)

[@dorothybhowmicktopic6889]

Hi..I want to know about AutoCAD 3d....let me know the course fees

[@iwanifarid4102]

hi, why mine said did not find entities? what should i do

[@iwanifarid4102]

i use super hatch, i did all that u told from the start.

[@muhamadshkeir7881]

Verbosity overdose on a command that can be done in seconds

[@jafffa71]

How to delete name of custom hatch pattern from custom pattern dropdown list?

[@user-ip3cp5di5h]

hi do u know the meaning of a negative delta x or y?

[@user-zs2ps5od8q]

How can I download AutoCAD from Google

[@RivellaLight]

Go to Google and search for "download Autocad"...

[@rajivsporkslede7860]

This is not the best to make a complex hatch pattern. I wanted to make a htach from a green wall drawing

[@aquibkhan3925]

How can i download AutoCAD sir.

[@RivellaLight]

Via the Autocad website?

[@DarshanSingh-iv2je]

u can purchase also from your market palace dude !

[@YuriyKhovansky]

I will try to do it with Woodglut plans.

[@hm2094]

Paid