3D house in AutoCAD from scratch - Part 2 of 3

[@sourcecad]

Download all the lesson files and blocks used in this video series here mail.sourcecad.com/3d-house-autocad

[@scientisttv7019]

I want to learn the full video

[@innocentmakwinja]

your a good teacher

[@jwelch1970]

The door was actually right side up to begin with. The piece on the end was actually the door threshold. This also means that the door was an exterior door.

[@peaceandlove11-h2b]

I really hope you make more of these with more creative houses and buildings it will really help :) Thank youu

[@jadyn1662]

I have a question Bcuz my scale of the drawing is not according the given numbers so I tried to adjust the scale of the given blocks but I found it is a bit hard to adjust exactly for the size should be. .. So how do I can do ??? I mean for the adjustment for the 3D object like curtain wall.

[@iriskey8833]

Very good explanations and everything is so consistent, thank you!

[@roxananechita2260]

Hello! I seem to have the same question, where can I find the blocks??? I watched the 3 series from the beginning but this aspect is not mentioned...can you advise please? Thank you!

[@afiasubah248]

Check the description

[@muhammeduvais4022]

Press Ctrl+2 on keyboard.. There comes a pop-up tab.. Select the required blocks from there😊

[@danieljitobor3478]

i have seen the link while checking the description in the video Thanks Alot

[@similoluwataiwo9946]

Please, which one of them?

[@similoluwataiwo9946]

Please, which one of them?

[@richaahlawat1219]

Where do I find introduction video and lesson files, I am stuck please help

[@harissououro4335]

Why didn't you use layers for this drawing instead of erasing and compounding it all? I'm curious!

[@geraldlaxamana9797]

Hi, Im new in autocad. How can I get furniture blocks,windows, stairs and doors?

[@masteringlawofattraction6064]

Why my blocks doesn't fit to my house structure? example the door, how to fit it? it has spaces

[@afiasubah248]

Try scaling

[@61snehalunia95]

Hello , I am not able to subtract the top part at (2:55) properly , can u please help in that

[@adammarianiuk]

Very Nice set of videos, You helped a lot

[@ashishraj9938]

Where can i get the introduction video for blocks?

[@Mahwish_Memon]

Sir how we get these blocks which you have saved at your desktop?? Plz guide me

[@ronakmehta5586]

Yes i have als same issue

[@afiasubah248]

Those are in the description

[@konsamloyangambasingh892]

Sir at 3:15 I'm unable to draw that rectangle. It says 3d centre

[@similoluwataiwo9946]

Please, I can't find the folder for blocks. Which of the links in the description has the blocks?? I've been checking your web and it's getting tedious. Thanks in advance.

[@amishah6348]

hello. very nice and useful videos to help students. At 19.58 you talk about blocks that refer to your previous video. Can you tell which video is that?

[@ronniedarag7395]

sir, where can i download blocks? i don't see the video introduction as you said... thank you...

[@afiasubah248]

Check the description, the link for download is given there.

[@chingzeyee4560]

@@afiasubah248 still can’t find 😢 can share the link of the video? Or link

[@kanoaavado1961]

Pls how can I get de software of de autocad

[@danieljitobor3478]

Pls i need the link for downloading the 3D blocks

[@rabiatuladawiahabdrahman7344]

On 19:22, after you adjust the stairs, i realize the stairs is exceed from the floor plan. Is it ok? Bcause i face the same too..

[@IrfanNasir]

It happened with me also

[@inside__kashmir]

sir yeh blocks kaha sa download krna hai iska lia video ek banaavo mana dakha tha playlist mai koi bi video nhi ha iska related

[@jwelch1970]

Another sign that you put the door upside down is that handles are below center, but after you flipped it, it was above center height.

[@nabeelalikhan8123]

Sir will you share the link of door and window drawing .mujhe mil nhe raha

[@sachindrawijesinghe1795]

Can you please mention the 3D blocks link

[@aashish12]

I am not able to rotate the door and windows curtains like the way you are doing why ?

[@ahmedbakarimussa3836]

NICE ONE.THANK OU,BUT WHERE CAN I SEE THIS LESSON 5 INORDER TO DOWNLOAD BLOCKS

[@ahmadydarlus7156]

Love interested wants to learn more from scratch please

[@ErAshokPandey]

Thanks for explaining so nicely

[@malikardhi1879]

I want ask to you how to make the block can fit with the drawing?

[@malikardhi1879]

And how to setting the factor to become 1? Please answer me , thankyou

[@algiermabalatan2020]

What exact video we can see the lesson files sir in creating blocks.

[@ssvijays]

what is the link to download blocks of door, curtainwall, furnitures

[@jayldapat6696]

please help me...i cant find any videos link or various video concerning about the cad blocks you reffering too

[@theessayist254]

it's in the description or download it from here goo.gl/Q21SHD

[@NancyGarcia-yq5iv]

@@theessayist254 thank you!

[@OP-qm6uh]

where do I download the block files from?? can find the link in here.

[@thaminasangma6310]

When I subtract roof and again subtract the middle part it remains the same why is that?

[@paulinmariya250]

Im too facing same problem.. Still tht everything went gud.. Bt nw im stuck😐

[@mahamatabakar9206]

@@paulinmariya250 I was having the same problem. But I tried with rectangle and then I presspuled. It work correctly

[@dachungalex6245]

How can I download 3D blocks

[@realshag01]

Beautiful explanations thank you

[@warquag]

cool courses thanks

[@veenakhona2242]

blocks is the problem how to get

[@Amimiya]

Download all the lesson files used in this series here goo.gl/Q21SHD

[@maddilachaitanya1441]

The downloaded file are unsupported sir

[@bonavinejeagbasi6440]

Now that the link for the lesson files and blocks are invalid, what to do?

[@sourcecad]

Please check it again the links are all working, it was a temporary issue which is fixed now.

[@monis55551]

i am not able to use second layer as surface layer when i am trying to draw rectangle , its not visible to me ?

[@jatieerlangga3420]

try to press house icon on cube view, then u will able to see the osnap track below the rooftop

[@shinena8694]

Where to get the blocks to insert?

[@muhammeduvais4022]

Ctrl+2

[@qurantheguidanceforjannah1233]

Nicely explained

[@sioshahadat3693]

how to import those archive or code blocks into autocad

[@shahsunny2083]

I want to download all this blocks but how???plz link

[@minecrafthouse996]

@Rakesh Chowdary where?. What's the name of that video?

[@XortssIsHere]

@Rakesh Chowdary i been watching the link video 4 to 5 times but the link is not there to download the 3d blocks... please help us to download the 3d blocks....

[@gboreole]

After adding mail id for download went to my mail but couldn't find any mails.. checked this 3 times and still didnt get any mail

[@sourcecad]

Please try the Junk/spam folder as well and if it still doesn't show up let me know on [e-mail] and I will send you the file.

[@belladiaz9133]

2:58 i cannot make the hole there huhu. Anyone?? :(

[@amithaappu6781]

Click subtract / select all / enter / select that area / Enter

[@meerinda]

sameeee (ಡ‸ಡ)

[@HariHaran-kr5kq]

Iam zooming the diagram tha presfull solid has hide why

[@johnlaforest6389]

Sir, I was following along very well until we reach this part; I cannot locate the Surface icon in my toolbar.

[@johnlaforest6389]

I figured it out. Thanks

[@bluedevil7488]

can u tell me how to download 3d sofa stairs n all

[@afiasubah248]

The link for downloading is given in the description.

[@napurullaabdul]

where to download 3d block?

[@thaminasangma6310]

Video 19:58😢part

[@bhonemyatpaingsoe7868]

Sire,I cannot download the blocks

[@dachungalex6245]

Your teaching techniques are SSS I like it! But, there are no windows in the design.

[@satyavarma4984]

Brother... please tell us REVIT

[@qhubban]

thank you

[@veenakhona2242]

Sent link of blocks

[@erniemaglabe8839]

You've just inserted your door incorrectly. it was inverted. The top side seems a threshold and should be the one touching the floor.

[@royrached6668]

Ever head of SIM GAME

[@udojackson1987]

Please I can't make the opening on the roof. After drawing the rectangle and extrude it, I can't make groove... its seems I'm not getting it right.

[@TaniaG24]

Same here

[@aswindev8093]

Not able to draw the rectangle on the roof. However I raw it becomes pulled down to the ground, or else alingned to the 3d center. PLease help! Been stuck for 2 days now

[@danieljitobor3478]

Pls I need the link for downloading the 3D blocks

[@robointerior]

When doing presspull on the 1st floor the boundary is not getting selected, instead any of the one polyline rectangle is only getting selected due to which it's coming like a box and not walls, how to fix this ?

[@ponshiva9296]

chose front view in view cube. check whether u have actually drawn the rectangle on the surface of the first floor.