Diagnosing air leaks on 12v systems.

[@dcmuzic2023]

Man I love this channel. So much quality given in all these videos. Definitely going to buy from southeast soft wash.

[@adventuresofahandyman4446]

been there done that. I had a cracked SH valve on the discharge side so even cutting it off didnt help. finally noticed a small leak, replaced the valve and fixed it. thanks for the info

[@FIDO-m4f]

Great information. Very useful as there have been a few times where I discovered air leaks at the hose barb connections. I have trouble with priming the pump sometimes too. Wondering if you can do a video on how you wire your 12V pump to the battery? We appreciate your videos and look forward to the next one. Thanks! Mike in PA

[@pressurewashingandhoodcleaning]

how high will it reach?

[@phdexteriorcleaningphd9774]

Make sure you have filters on your lines lmao and you don’t get trash in the one way check valves like I did. Thank you for calming me down.

[@KeithHill2]

Another awesome video. Question. I’m trying to build a soft wash system without a pressure washer. Which spray hose do I need? 1/2” ? How many feet? Where to purchase? Which hose reel can I get away with? Where to purchase I want to use 5/8” flexzilla for water supply. 150’ ok?

[@southeastsoftwash4020]

Keith H kuritec 1/2” 200’ several good vendors. We only use titan reels. Durability is much better. Flexzilla is fine.

[@keithdittmar1701]

Good Video This should save you many phone calls

[@sodobson]

Awesome video. Thanks for making it

[@adventuresofahandyman4446]

I'd love some info on how you mix your Surfactant in the surfactant tank. As far as water to Surfactant. I'll be order some from you in the next week. Thanks

[@NWPowerandSoftwashCo.]

Do you have to have all the lines hooked to bulk heads

[@johnwitt586]

Great info! Process of elimination!

[@JUAN120484]

I’m only person doing pressure washer. what soft wash system do you recommended for one person for starters of roof cleaning

[@tylerjustice7644]

Just built my system and was having the issue where it wouldn’t prime. I bypassed my manifold and dropped the hose into a bucket of water like you mentioned and still had the issue. So I bought a new pump, and I’m still having the same issue. Getting good voltage and everything. I have no clue what the issue is and I’m dead in the water.

[@TheSkyhawking]

Just had that problem..traced it back to a crack in my suction line in my tank...

[@braydenbledsoe3252]

Is it possible to have a soft wash system plus a 8 gpm pressure washer?

[@alejandropena8230]

How much is it for that skid that your demonstrating

[@alejandropena8230]

What are the dementions on it as well i want to see if it will fit in the back of my pick up if not so i can get a flatbet

[@tonyvalentine5704]

Great advice 👍

[@cyrparlapiano2514]

This video is very helpful! Wondering where you get the end sprayer tip ?

[@southeastsoftwash4020]

Cyr Parlapiano Walmart or homedepot

[@brents1643]

What size are the barb fittings that go into the pump?

[@southeastsoftwash4020]

1/2”

[@user-et3sv7gn8f]

I have 5/8 hose for shooting I get probably 30ft but more water volume than 1/2 hose right. Is 1/2 hose good for a 7gpm 12v pump? I would think that 5/8 hose would get more water volume.

[@southeastsoftwash4020]

5/8 is better for 7gpm

[@jasonlopez3412]

Thank you!

[@solutionlandscapepressurew2578]

Man I have a 7GPM pump and I’m getting 25 feet and I did the bucket test 3.5 GPM No air like at all everything it’s 1/2 house supply hose and application hose Need your help

[@Tacos888]

The are 7gpm rated for transfer not spraying because of friction and voltage

[@kingofpressurewash]

I hate stupid air leaks