1989 Box Chevy Build Ep.34 Building A Killer AMP Rack!!!

KZbin!! In this episode of the Box Chevy Build I get started on building the amp rack for my sound system. I came up with a simple and clean design that allows all of my equipment to fit with room to spare. it's not 100% complete but on the next episode I'll get it done. I've already got everything that I need to finish it..
THANKS FOR WATCHING!!!!

[@davidallison976]

More stereo than the cars worth! Bro, that’s the old school way! Love it!

[@dwaynebryant4852]

This is oldschool/88 that looks sweet, keep up the good work peace

[@Mr.Cutt82]

Nice work southside

[@YoutubeNonaBudget]

Nate the vision on point frfr 💪🏾👌🏾

[@SouthSideNate]

Masterpiece!!! 🦾💯

[@MoneyMook_]

If this is your first time trying a lot of this you’re a natural bruh that shit 🔥🔥🔥🔥🔥

[@sneelectronics8339]

YOU DEFINITELY DID YOUR THING ON THAT AMP RACK FOR SURE🙌🏼💯👍🏽🔥

[@nonameisthename138]

You are doing your THANG bro!!! 😮 I've NEVER been that dude for wiring, but I've always liked to watch it done. 🤷🏽‍♂️ Keep killin it bro!! 👍👏👏👏

[@Dolojones86]

Yoooo, it would look so much cleaner if u hide the wires. Drill holes in the wood and run the power wires down underneath the amp rack. U could even use grommets for looks!! Just a suggestion.

[@SouthSideNate]

Nah that’s to much work i’m going for a simple clean setup. once the subs go in this amp rack won’t be seen!

[@SouthSideNate]

plus the amp rack will be resting on the wires and would create problems for mounting it in the car! people usually hide the wires under platform amp racks mine it not a platform setup

[@khh1725]

​@SouthSideNate bro that I'd a lot of work and if there is a wiring issue you would have to remove the entire rack to find it.

[@gbodytoys]

I think it looks better with the wires showing, as long as they are neat. If you watch 5 Star Car stereo, its all accessible from the component board/panel.

[@thewhitefamily5515]

The way I did mine is I used cut off pcs from making the amp rack and just glued little squares of 3/4" mdf under the amp rack and it created enough space so the wires wouldn't be smashed under the rack and then the only part of the wires you seen was the few CLEAN inches of where the wires come through the rack and go into the amps. So I still had to zip tie like you did but ya didn't see all those wires. I used zero g. Wires too. So put little spacers of 3/4" wood on the underside to make space for the wires. You would like the looks even more 100% I know don't nobody wanna redo it but you would be happier with results.

[@3reegzzz813]

Mane this is the definition of doing your OWN build!!! U literally put in work on this project and that’s how you do it…. Respect 🫡 to you G… keep up the excellent work!!! I’m impressed

[@SouthSideNate]

Thank you bro! 🦾💯

[@3reegzzz813]

@@SouthSideNate u already know 💯!!!

[@waltermccue1495]

Bro, your excitement at the Jeep had me rolling. You got a lot of knowledge and skills though. Doing things right is tough but you got it. Keep hustlin man.

[@solodoloyt1590]

Man I been going back watching all the old videos man the change is real you been going real hard 🎯💪🏾💯

[@SouthSideNate]

Thanks for watching bro!!! She transformed for real!!

[@cliffharris322]

Man that box chevy is going to be something serious bro

[@marielinelizaire8114]

Looks legit. Nice work

[@jmacscrewg564]

All the way from Southern Cali Bro Great Job. Keep up the Outstanding work💯✊🏿🏁

[@lifeuptown7516]

Nice that's how SCS STEVE BE HOOKING EM UP 💪🏽👍🏾💯

[@kayob299]

Keep goin bra i can watch this shit all day every day i love seeing us building & doing alot of our own work. But you def need a garage cause you gone have calls coming thru for you to do some work for others

[@truckerhen2768]

This man just keeps on motivating me. Keep it up man, you could open your own shop they way you moving! RESPECT!

[@jake_574esco]

Thats hard i like how you did the amp rack you made it look clean 👍

[@cali8221]

Bruh I salute u..I be happy to see my brovas able to build and hook sum stuff up..I wish I was inclined to but I gotta pay other ppl to do it..But she look like she coming together bro..

[@wm.griffin2237]

Keep doing ya thang

[@kennethking5424]

#1#LOVE THIS ONE#CLEAN SET UP BRO#LOVE IT

[@chevy4life-n3y]

Amplifier rack looks good in the box chevy 💪🏾💪🏾💯

[@bishop2355]

Love the amp rack!

[@GermarcoTate]

Dat joint hard on bro u defly just helped me out🤝🏾

[@rippingandflippingcards4135]

Out there looking like a nascar pit stop!

[@stevemaniaci4750]

Im like you when making a amp rack , do most the wiring out the car first . Once you set that in there . Just hooking up zero gauge power ,an ground , right to the power bank . Solid work man thanks for posting .

[@timothywalker3168]

Love the way you did everything. you may have to use some right angles adapter for your 4channel. You got me motivated to do my install in my truck. thank you ..

[@ProfitGang28]

Your passion and determination is very inspiring bro! Keep going! Keep inspiring! Keep picking up that camera! Stay you! Stay original! Keep motivating and inspiring! 💪🏾💪🏾💪🏾

[@gbodytoys]

Good work brother. Solid planning, good use of ferrules, and aesthetically pleasing. The clean wire club would be proud.

[@shodyshod89brougham]

Bro that shit 🔥 looks dope keep doing what you doing

[@alexholmes153]

Yessir, it’s go time 💯💯💪💪💪💪. Professionally done up playa. RealTalK 🔥🔥

[@mr.g.d.i.y]

You got down with That amp rack brah! Good shit!!

[@figo2992]

Tspec distribution blocks are cleaner, but nice project 🤝🏽

[@busa1150]

Saw this on my for you video and had to sub. I'm inspired.

[@SouthSideNate]

Awesome! Thank you! 🦾💯

[@whipscustoms6481]

Looks good

[@Ryan-my8wj]

🔥🔥🔥 fire bro keep going up. I personally would’ve put carpet on the board and hid the wires. But you Deff did ya thang

[@consciousconscience912]

Looking good and clean. 1 bit of advice dual amp inputs for your sub amps. Yes it will take more wire but it will feed the beast faster and more efficiently. I basically use dual inputs on all my amps and they never even get warm really. And get lithium battery bro. Trust you’ll appreciate and love the as soon as you put them in and see how your system react to em! Bass on

[@sgtJOOSEcapeS]

Sht dats A-1 tho .... U got it steady and ready 💯😎

[@big-edaniel5522]

Looks hella coo hommie !!!! You gonnna be slumppppin Purdy soon

[@marcusjackson380]

Pressure you got your foot on they neck box life 💯💯💯🔥🔥🔥✌🏾✌🏾✌🏾

[@Dkcustomcarz]

Keep pounding bro

[@poleongriffis4262]

Salute the grind in work put in 🤙💯,Nate what gone do to keep them amps cool?, You got that amp rack build you can put some fan behind it cut a section out where you got the amps lock down where it can't be seen,it's a few ways you can set up the fans on how they come on put a temperature gauge where get to certain point in it kick on just like radiator on set the fan to the amp remote wire when the amp come on the fan come on and make sure the ground wire set the amp just a ideal if you don't already know that..

[@larrymontgomery4902]

Damnit that jeep is mad

[@charliepasco2272]

Nice work 👏

[@Evilthx]

I like it. Nice and clean.

[@Tyroneslifestyle819]

That amp rack 🔥

[@DADDYCOKE2012]

Loving the build, this amp rack came out clean. I’m not sure if you know this, but the wire ferrules have their own special pliers where you can crimp them to the wires so they don’t fly off, but you did it just fine with the heat shrink to keep them from slipping off

[@paulhall70]

Dont use that tool for these round holes. It will create more issue in the long run

[@raynardlinen7599]

Clean look man👍👍👍💯

[@solodoloyt1590]

Man yoo Nate you gotta put sumthing nasty in the truck like 6 12s 🔊🔊🔊🔊🔊🔊or 4 15s 🔊🔊🔊🔊beating real hard🎯💪🏾💯

[@SouthSideNate]

Yessir!!!! 4 15s is the plan

[@solodoloyt1590]

Ok bet yeah it's gonna be slamming can't wait til you got it up and running 🎯💪🏾💯

[@LiiGoonie]

He said u gotta play the dirty boys 😂

[@baronvonscratch]

Looks good.

[@tsutton4673]

Nice.

[@humblekingb3506]

You doing ya thing my boy

[@Ernestom5]

Very entertaining footage. "Got two 1200watt amps...." Meanwhile, amps wear 2X25A fuses capable of 400rms max...

[@marcusjackson380]

Word of advice drills some holes put your wires on the back side then connect them makes a cleaner install so they hide them when you bolt them down

[@irajamison5558]

Nice 💯👌🏾

[@roncaraudio8682]

Tuff man, keep it up.

[@walterwilliams2711]

Motivation

[@shawnbillups76]

Ok I see you , it go time 4 real now

[@sherrodmorris5426]

Sweet 💯💪🏾

[@derrickcarter8787]

bro thats fire

[@cali8221]

I jus sub..i jus had my system put in too.2 skar vxf 15s taramps smart 5k bass .the box 6.5 cubes tuned to around 31hz all ds18 pro mids and highs ×2 and 2 super tweeters..she slap for sure and kill the lows whole car be shaking..Keep bassin..

[@Chunky.B]

Lookin like mr perfect

[@405scottjohnson]

Good clean build bro. I can appreciate you trying to do it right. That being said I believe the ferrules need to be crimped onto the wire prior to being screwed down into the amp. Keep the vids coming, I just recently subscribed

[@paulhall70]

Never want to do that. You want to use the set screw to crimp it. That way the ferrule conforms to the hole and crimps the wire at the same time

[@liltwin901]

I see ya..grab a CE auto relay turn on kit for them remote wires..CLEAN WORK

[@montaesullivan9252]

Stand da fuk up n give my boi Nate his mfn RESPECT🔥🔥🔥🔥🔥💪

[@Mr.Cutt82]

His dynamat killer tho I like dat my bulid got 3 layers

[@babyjoe8410]

Looks good, it would be great had you taken time to actually paint the amp rack rather than spray painting it. Black zip ties would make it stand out. These are simply suggestions on your next build. I agree with one comment stating hide the wires. That sound is going to be LOUD!!!!

[@terryburton971]

I be surprising myself.... Lol made me laugh lol

[@bernandoturner4840]

Very Neat… looks professionally done” for A Fraction of the Price..😅

[@KINGCOBY]

It looks coo but I would’ve hidden the wires, but I still rock with it

[@sgtJOOSEcapeS]

Wassam mane aye it'll be right with the battery resistors so headlights won't dim out too plus to reduce much Humm noise dawg

[@FullyxLoaded]

Yooo bro! Do you have a video showing how you ran the two batteries in the trunk?

[@Chunky.B]

Pass that the blunt bro we smoke 2 Nate it’s go time

[@b.johnson126]

You should have mounted them closer to the front of the trunk for easier access if you need to get to em and tucked the wires underneath the wood. Good shit though

[@Dezydezl]

Easy way to know your length of wires, just use string to measure the length you need. No waste

[@ruddystamps3489]

💪🏾💪🏾💪🏾💯💯💯

[@melvintuckerjr2450]

👍🏾👍🏾👍🏾💯💯💯

[@5.7jones58]

Where did you get that wire kit from with the stink wraps fam?

[@sensimillastrains1630]

That rack is definitely nice but what about adjusting the settings on the amps?

[@jerrodmotley2734]

What was the actual measurements for the amp rack I’m going to do mines the same way

[@Bookiesharde3]

Go Time!

[@antoniokeyes2202]

Summer rain pressure

[@shonnwashington1009]

You gonna need a bigger alternator for all those amps

[@terryburton971]

I subbed

[@stevebowcobrasvt8094]

👀🔥🔥🔥🔥🔥

[@skreechwitdachevy]

Got the measurements for the rack?

[@brucespivey8]

That mf look good🔥🔥🔥

[@shonnwashington1009]

You could have did hidden wires under the board but that's cool

[@ADvision]

You doing yo thang my boy!!

[@rhandro]

You gotta shop.

[@adamagedone4u]

Hey I don't know if somebody commented already but u shouldn't run a single 0gauge then split it into so many runs out so u can run 0 to 0 or 0 to 4 or even 2 4s but 0 to 2 0s and 2. 4s is asking for trouble you should run three runs of 0 to that distro book trust me I'm running 16 k on 5 runs

[@cliffharris322]

Are you going with 4 6x9

[@onlythefam11]

I never heard of that brand of audio

[@MichaelDonavin-dx9bq]

Shouldve used black zip ties to hold down the wires

[@Savagelobo505]

Nice work but y would u use a weather scrap wood that's water damage and warped 🤔

[@SouthSideNate]

Why not? It’s wood bro and it got the job done just fine! for something that’ll be in the trunk with amps screwed to it and will never be seen other then in videos like this just to show the setup.

[@cpzmelbs]

Ain't nothin wrong with it ? If you got the stuff you use it. Don't gonna go out buy more my dude spendin money for nothing

[@Bookiesharde3]

Aye I have a question about your build bro

[@Mr.Cutt82]

Yo Southside tape some of your trunk off where them oval shape holes are fill it with foam then make it look neat shave it down then paint it back light blue you won't be sorry bass on

[@brianjones9561]

Yeah it is a clean set up but hide them wire joe

[@EBOYZKamaro1985]

I fucks with dat amp rack 💯

[@anthonygonzalez352]

It will look a lot cleaner if you hid your cables under the amp rack

[@SouthSideNate]

Negative!! it would create problems for mounting it in the car, it’s not a platform amp rack it’s designed to mount flat to the trunks floor