Spartan Locker Install in Ford 8.8 (Explorer/Jeep)

  Рет қаралды 4,584

Hard Earned Bacon

Hard Earned Bacon

2 жыл бұрын

Almost done with my 8.8 axle swap into the YJ. Installing a Spartan locker to finish up the modifications.
Spartan locker - amzn.to/3DYOQVt
Solid cover - amzn.to/3hg5c40
I’m an affiliate marketer with links to an online retailer and receive commissions for purchases made through these links and affiliated sites.

Пікірлер: 10
@ericacherney3132
@ericacherney3132 2 ай бұрын
That looks a lot beefier than the weldy I wanna do. Makes me wanna spend $400 so I don’t destroy my housing
@Mickale-Moranis
@Mickale-Moranis 2 жыл бұрын
NIce, seemed a little complicated for getting those spacers and couplers. 95-01 8.8s (discs) have a fill plug on the pinion snout. That Solid cover had a high level fill plug. You want to fill to where the fluid is at the base of the axle seals (bottom of the axle tube). So don't use that cover's fill plug as the point. Its way too high (my experience, LOL).
@HardEarnedBacon
@HardEarnedBacon 2 жыл бұрын
It was definitely a tight squeeze getting everything in. A non C clip axle would have been much easier. I was wondering about the fill plug on the cover. It would take like two gallons to fill it up to that hole haha. Will definitely be using the plug on the snout.
@STBRetired1
@STBRetired1 6 ай бұрын
I wonder why that SL F8.8-31 # 17005 kit costs $ 582 on the USA Standard Gear Spartan Locker website but only $ 250 on Amazon and eBay?
@wyattpedersen3970
@wyattpedersen3970 Жыл бұрын
watched a few videos now, bit confused do you still use some of the old gears washers/spacers?
@HardEarnedBacon
@HardEarnedBacon Жыл бұрын
No the locker replaced everything inside the carrier. The C clips have to be reused though obviously
@nieckeodaucsavage2164
@nieckeodaucsavage2164 Жыл бұрын
You didn't install the thrust washers on the main axle gears. This must be my issue. Awesome and thanks
@whatchu_talkin_john_willis
@whatchu_talkin_john_willis Жыл бұрын
spartan specifically instructs NOT to reinstall the side gear washers
@BidenOF
@BidenOF Жыл бұрын
Can you do this to a factory posi unit
@HardEarnedBacon
@HardEarnedBacon Жыл бұрын
No, carrier is different
8.8 Axle Swap into a Jeep Wrangler YJ
26:03
Hard Earned Bacon
Рет қаралды 40 М.
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 23 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 51 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 110 МЛН
How To Install an Aussie Locker - Ford 9 Inch
19:33
BleepinJeep
Рет қаралды 25 М.
Lunchbox Locker Comparison!
13:18
Freedom in 4Low
Рет қаралды 70 М.
Spartan Locker Install Ford 8.8 Differential  F150
11:04
Oldsmob455
Рет қаралды 727 М.
How To Re-Gear a Ford 8.8
41:36
The BFH Garage
Рет қаралды 37 М.
Ford 8.8 Regear - Jeep YJ Swap
27:51
Hard Earned Bacon
Рет қаралды 4,4 М.
Regearing yourself? Tools you'll need to do right! For under $100
12:40
Lock Right Locker - Part 1: How it works [HD]
7:46
KDCvideos
Рет қаралды 474 М.
FAIL - Lunchbox Locker Install
13:13
D&E In The Garage
Рет қаралды 151 М.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
9EPIC
Рет қаралды 3,8 МЛН
Eksperimen!! Modifikasi Sepeda Jok Paddock Sepeda
0:36
aseli bmx
Рет қаралды 708 М.
Достойный поступок водителя❤️
0:39
Taкса
Рет қаралды 3,9 МЛН
Que destreza al volante 🤭 #todos #seguidores #destacar #autos
0:13
МТЗ-80, подписывайтесь на канал, есть видео.
0:56
Александр Маляр
Рет қаралды 4,4 МЛН
Every car need this.#car #carhack #shortsyoutube
1:00
Chaudery Auto Traders
Рет қаралды 6 МЛН