Speaker Cone repair

Quick way to fix a speaker dome that has been pushed in.
But you need to be careful doing it

[@madeinengland6784]

Yep done this since the late 80s Now just get a hair dryer which will re form the dome and get rid of the dents, done it hundreds of times. They. Can handle a lot of heat, trick is to get them hot as possible and slowly you’ll see those small dents disappear because when you reheat thin plastics they go back to the “memory” shape they originally was.

[@deekay2]

On the woofer, that's not the cone that's dented. It's called the dust cap.

[@SuspiciousAra]

The BEST way to do it is wrap some scotch clear tape on your finger, with sticky side on the outside and gently touching the cones and pull em out. works 100%. after pulling the cones out, just use a heat gun and heat the cones for like one second, not more. can wait a few seconds and try again if not happy. all the scratches will be gone, 100% restored.

[@markzupkosky594]

Ioan Koka has

[@osamagillani7986]

thx alot it worked !

[@bfish999]

Thanks for the tips&tricks. However, since normal tape wasn't sticky enough in my case, I used Duct tape instead what worked out very well.

[@icefight]

I really hope this works bc when I listen to music it pops in and out making this noise which ruins the bass

[@DoktorDamage]

@@icefight Gorilla tape would work better I am thinking!

[@jeffpoirier1184]

I used electrical tape and folded it like a U. I stuck it on the cone and pulled outward. It worked great!

[@f14-e9e]

Es difícil darle la forma perfecta, pero queda mejor .. La recomendación es, nunca sacar las mallas protectoras, excepto para limpiar los parlantes...

[@1101-x2o]

Adjustable suction vacuum ?? that’s crazy cool, nice vacuum dude !!

[@davidmeskhi8446]

wtf xD

[@ManInTheBigHat]

Those last dents are warped and distorted material. No fixing that.

[@Uraim]

what happen when cane have small hole?

[@tessaevans2468]

Will that help for my radio

[@boogiestreet594]

if you don#'t have a good hoover. And no variable this and that. wat you can do, is just turn it on, hold the thing far away from the dustcap or tweeter, and just VERY slowly edge it toward the speaker. don't pt it close!

[@antonioanchiraico4542]

Yo lo hice con pega pega o cinta pegante o cinta aislante... Perú

[@davidtube9895]

It not bad

[@XXXmelXodyXXX]

talking too much and when you got to fixing the tweeter the camera was directed downward and tweeter not visible while popping ?! it is like 1 minute video in 7 minutes !!

[@tytlersbicycle]

Dust cap. That’s not the cone.

[@vladtepes2437]

Your English is funny . I don`t recognise the accent . Where are you from ?

[@OldMatesBackyardTech]

Australia

[@abrahamantoniosanchezrubio266]

Mantener lejos del alcance de estos seres 👼👧👉🔇 😊😁

[@4evaclapham]

3.00

[@arunachalyoutubercritics6798]

BAAATTTT😂😂😂

[@OfficialUnderDog]

Guess I'm going to hell :/

[@axedog1395]

fail

[@bryanhines1789]

And remember dust covers on around juveniles and anybody drinking🥴🥳🤨

[@offtop6056]

I just super glue my finger to my cone and pull it slightly 🤣🤣 works like a charm 💪

[@sickoftheleftwingscum]

Yes then turn the thing on full blast and hope the vibration works your finger free of the glue !🙉👍

[@WELLINGTON20]

@@sickoftheleftwingscum rips the cone

[@AmulangaRecords]

How to fix it proper starts at 6:12 :)

[@officialpoa3171]

*I bet if you used a real good hair dryer to warm the material up before using the vacuum, those little dents will come right on out of the sub.*

[@speakeraddict2199]

You broke my speaker thanks

[@roninnovastar1321]

What about a thin stick with some double stick tape attached to end,, to help pull out remaining dents ?

[@OldMatesBackyardTech]

You can, but you need to be careful

[@MikeG-js1jt]

Multiple cones dented looks like the work of a small child... although my thirteen-year-old daughter pushed in one of my mid- range woofers on a pair of studio monitors about 2 weeks ago.

[@nitinn1448]

Fake it’s not work use favikwick or quick ilastick if ur happy with my suggestion

[@carloszambrano3227]

Buena idea, thanks...!

[@curtisgta5fan272]

Tape works also

[@elalim1691]

How

[@mercurym-7904]

Curt Chestley nope

[@razanmahrzn3089]

Tqsm man

[@louie422]

Lol work

[@bikkkashpariyar5736]

Nepal

[@LOTPOR0402]

A bit of heat may get the rest out

[@wric01]

Hair dryer warm it then suck it. Glustick if all else fail.

[@kb_acoustics]

That's not the cone that you repaired. It's called ''DUSTCAP'' ...

[@donmurdoch6440]

I bet a certain "swedish made" pump would work as well 😂

[@bvaljalo]

That's not my bag, baby ...

[@donmurdoch6440]

@@bvaljalo honestly 😅

[@bvaljalo]

@@donmurdoch6440 That whole sequence, culminating with the friggin' book, is my favorite part of the whole movie. So random and hilarious.

[@sickoftheleftwingscum]

I bet he learnt it at six or seven because he was the little bugger that did it in the first place !

[@GOD-mj9wt]

am i the only comment YES BECAUSE I AM GOD!! anyone else who comments is going to hell

[@krzychox]

Yes, please

[@huntermiki9898]

its dust cap not cone and don t think it will do something other that preventing dust get into coil area

[@jimmy-ky7mw]

it was shown to u. damn i knew i came up w this idea my self n i did it mutiple times n no problems on high settings. if anything u just got the glue the dust cap on

[@Trevis_Bikle]

сколько же лишней болтовни(

[@peterliljebladh]

Wouldn't a couple of slots in the end help with avoiding too much suction damaging the speaker?

[@soxdlmao9135]

i've did mine with gum on my 8" mid ranges at car

[@5mjc]

Why not invent some suction cups,like dome things.

[@johnglass633]

Dust cover kit is like 5:00

[@stiglilleaas5685]

"I've done it a million times"...right...if you 50 years old that mens that you have to do 54,7 every day in 50 years. With this speed...hardly....just kidding... :)

[@betzabegonzalez5044]

😂🤣😊😅😁😂🤣

[@boogiestreet594]

Do thes ebeing pushed in make any difference? like will i hear crackling etc?

[@neldcammock3053]

It shouldn't make any difference to the sound unless it is pushed that far and touching the magnet, it is only a dust cover really.

[@johnglass633]

$5

[@stewiegriffen100]

Worse case scenario, the cone got dented in so badly that it permanently keeps it folded in LOL

[@КираКерн-н8я]

Смотреть с 3:12. До этого просто болтовня)

[@MrTopsoil911]

Epic fail lol

[@cenapbaba]

does dented cone affect the sound quality?

[@OldMatesBackyardTech]

Depending on to facotrs, it can. 1 being is the dent in the dome just a dent or has there also been a rip 2 has the dent caused the dome to detatch from the cone.

[@Jaboof]

Title should be ... “how to make a 1 minute video last 7 minutes”

[@silvesterweber2879]

It's only a dust cover dome U can use hot water pour lil stream on the dome carefully then

[@ysfoz5684]

I would not use this approach. I prefer using a thin strip of clear tape or electric tape to touch the dust cap gently, and pull it out.

[@lordadz1615]

i dont think that would work on plastic

[@ledfed1912]

A pipe on the vacuum the same diameter as the dome would be better.

[@davidmeskhi8446]

that was the case with me :D

[@a.v.k.2852]

This sucks.

[@neldcammock3053]

They are only dust covers, not really needed if you have a dust free home and them being pushed in should not make any difference to the sound, unless they are touching the magnet.

[@SuperGeorge2112]

Easier to just put a new dust cap on the woofer. Carefully use a scalpel to cut the old one out and buy new dust cap and apply with adhesive.