{Spearfishing Activities} 🤿 Building my new speargun! Invert Roller 100

[@MrMyvids4you]

Hello AndrianBlue, all of your videos, and I watched this one three times in a row, and let me give you my sincere congratulations, what you have done is just a real master piece, I have been working on my own speargun project for years, and many times I wished to have a cnc milling machine and a real lathe. All the best and stay safe, soon this situation will get better! Google translate: Ciao AndrianBlue, ho appena visto tutti i tuoi video e ho visto questo video tre volte di seguito, e lascia che ti dia i miei sinceri complimenti, quello che hai fatto è solo un vero capolavoro, ho lavorato sul mio fucile progetto da anni, e molte volte desideravo avere una fresatrice cnc e un vero tornio. Ti auguro il meglio e stai al sicuro, presto questa situazione migliorerà!

[@AndrianBLUE]

Hi! I have seen your videos too!! Before I started my project there has been a lot of research on the web! Thanks a lot!! I wish you manage to get the machines you want for your projects soon! And lets hope this situation clears out soon and with as low impact on humanity as possible. Have a nice day!

[@m6r6m6]

Homemade CNC, homemade ψαροντουφεκο, homemade ραουλα. Εξαιρετικός! Άψογο αποτέλεσμα

[@AndrianBLUE]

Σ ευχαριστω πολυ! Να σαι καλα!

[@Crooks103]

This is a brilliant build. I could have watched a lot more of the build. That CNC work was incredible.

[@AndrianBLUE]

Thank you!

[@limonspearboy7412]

Nice good job beautiful speargun Adrian

[@AndrianBLUE]

thank you! have a nice day!

[@GabbyRamalSpearfishing]

Soo amizing gun man love it ...

[@AndrianBLUE]

Thanks!

[@nathanp8049]

Definitely one of the best videos for a homemade spear gun I've found. I'm trying to build my own to occupy some time during the pandemic but it's hard to find half decent how to's haha.

[@AndrianBLUE]

I have watched a lot of videos on KZbin. Also what helped me a lot was to search and study a lot of photos of other spearguns. I spent a lot of time trying to understand what every builder did with his build and filtered what was good and what was bad (in my opinion). The process depends a lot on how you want to build the speargun, meaning if you build it with manual tools or with CNC because I have to refine the design for the cnc while with manual tools you just work on the actual piece till you make it the way you want. I have cut a lot of test pieces for the handle to get to a point it feels comfortable. This was the 2nd speargun I have built. I still make modifications to the handle. Today did a new test piece and I have already made some changes to the design to cut a new test piece in the following days. This next test piece that I am gonna cut will possibly be the final one!!!

[@nathanp8049]

@@AndrianBLUE yea, I'm going to do it full manually

[@AndrianBLUE]

@@nathanp8049 Good luck with the build!

[@josefilho1744]

What a wonderful weapon, friend, congratulations on your project !!! Hugs from Brazil :)

[@AndrianBLUE]

Thank you my friend! Have a nice day!

[@eDuArDosAnTos-bd7bo]

very nice design... planning to upgrade my speargun

[@AndrianBLUE]

Thanks! Good luck with your upgrade! I hope it works great!

[@ermessub7983]

very good

[@AndrianBLUE]

Thank you! Cheers!

[@ermessub7983]

@@AndrianBLUE contact me with whats sapp [phone]

[@KostasParaskeva]

Ωραίος φίλε μου, το βίντεο με το cnc μεθυστικό, το όπλο λιτό και όμορφο και η βολή εντυπωσιακή... μπράβο 😊

[@AndrianBLUE]

Ευχαριστω φιλε! Να σαι καλα!!

[@jackkando9585]

Μπράβο σου! Εξαιρετική δουλειά σε ξύλο και μέταλλα καθώς και έξυπνα μινιμαλιστική κεφαλή η οποία ωστόσο δείχνει στιβαρή καθώς βασίζεται σε άξονα πολύ παχύτερο από τα συνηθισμένα 6χιλ του εμπορίου. Και πάλι συγχαρητήρια !

[@AndrianBLUE]

Ευχαριστω πολυ! Να σαι καλα! Το αξονακι για τα ραουλα ειναι 8mm με τορνιρισμενα τα σημεια που παταν τα ρουλεμαν στα 6mm.

[@angkit216]

Nice gun

[@AndrianBLUE]

Thanks

[@renatosambilay7516]

You’ve done an excellent job, keep up the good work. I’m just knew on this hobby and getting interested, you’re video inspired me more, thank you from Philippines.

[@AndrianBLUE]

Thanks a lot my friend! Have a nice day!

[@fedorkompas1087]

Beautiful. Just beautiful. Hope you'll sale them soon!

[@AndrianBLUE]

Thank you my friend! The design is even more beautiful at the moment! I believe the design is almost ready!

[@tydengr]

nice design

[@AndrianBLUE]

Thank you!

[@rinalyndelfin9904]

Beautiful speargun sir...i hope this coming christmass i get one of your work sir...i am from philippines...

[@AndrianBLUE]

Hi! Unfortunately we have lockdown in Greece and this has delayed my progress. My speargun has improved a lot. I will make a new video sometime soon. Thank you for your interest!

[@rinalyndelfin9904]

Your welcome my friend.

[@MrJeepar]

perfect bro bravo

[@AndrianBLUE]

Thank you my friend!

[@omarfarouk8061]

A very nice speargun, l am impressed. I have one question if you allow me please: how to do to make the speargun stable in water when you dropped it ??? Thank you.

[@AndrianBLUE]

There are pockets on the underside of the speargun where I can install Lead. When I dive the speargun for the first time, I carry small lead weights with rope atrached and I hang them on the speargun and measure how much weight is needed to balance the gun, and then just install that weight into the pockets. If you see in the video, when I load the 2 bands under the gun the pocket cover is visible. There is one more pocket under the grip so I can balance front to back balance. ;-)

[@omarfarouk8061]

@@AndrianBLUE ok ok ok Tkanks alot. it's just amazing.... amazing. You are an artist.

[@johnners911]

Nice work! I think the fish were staying home that day as well.

[@AndrianBLUE]

Thanks! Yes the fish were not there... You can check how rhe speaegun has evolved on newer videos! Cheers!

[@guaracyleandro]

Top

[@AndrianBLUE]

Thank you!

[@guaracyleandro]

@@AndrianBLUE I am Sub hunting here in Brazil

[@AndrianBLUE]

@@guaracyleandro Great!

[@ISMACGREYSUB]

Incredible shot!! beautifull speargun! sub +1

[@AndrianBLUE]

Thank you!

[@ISMACGREYSUB]

@@AndrianBLUE You wellcome

[@dalansingson]

I wish I had a CNC. It almost looks like cheating, but I appreciate your craft. I know what goes into CAD and path programming. Well done.

[@AndrianBLUE]

Thank you! Yeah designing organic shapes like this one in CAD is really hard and time consuming. I don't even know how many hours I have spent to create the model and refine it.

[@TryGhan]

Waww nice salam from Indonesia

[@AndrianBLUE]

Thank you from Greece! :-)

[@adamserra9809]

amazing design and great balance , is it possible to ask what’s design application / tool you used to draw up the file ?

[@AndrianBLUE]

Thank you! The software I use is Autodesk Fusion 360

[@gianlucapacini8532]

@@AndrianBLUE hi, can you share the file with us?

[@sulajfisnik]

Best video and amazing work I really appreciate your skills, as a gun lover aswell I build a invert head for my pathos 82 and i did a fusion 1 ,perfect shot and beautiful,what program do you use autocad or solid works?

[@AndrianBLUE]

Thank you! I use autodesk fusion 360 to design the model and create the toolpaths!

[@shahabheshmati-alamdari1979]

Really impressed with your CNC machine. Are you selling this machine? Our somehow to provide the step by step designing process? Thanks a lot

[@AndrianBLUE]

Thank you. No I am not selling the machine. It was built for my needs. To design it I started from the X axis. I positioned the X axis linear guide rails first and then built the rest from there.

[@msacontrocorrente]

Wow that looks amazing, how long does it takes for the machine to finish the job?

[@AndrianBLUE]

Thanks! Well this is not a simple answer. The machine once the wood is ready (glued and faced) takes around 7-8 hours to finish the main body and the grip. But there is a lot of time spent on setting up the machine, setting up the tools, machining other parts of the gun like the rods of the head, the hooks for the bands etc. that add up to the time needed to complete the build. Then you have the assembly of the parts and the finish with teak oil which also takes a considerable amount of time.

[@msacontrocorrente]

@@AndrianBLUEThanks for the answer, Andrian why do you prefer the oil to finish the product?

[@AndrianBLUE]

@@msacontrocorrente I prefer Teak Oil over varnish or epoxy coats mainly because of the easiness of maintaining the wood. With Teak Oil you can apply a new coat every ~6 months and it will be like new. Or if you scratch the gun on a dive you can just apply some teak oil on that area with a rug after the dive and it will be ready to go. With the other finishing techniques if you scratch the coat it is a mess to re coat the wood.

[@msacontrocorrente]

@@AndrianBLUE Does it seals up the speargun as the epoxy?

[@AndrianBLUE]

@@msacontrocorrente Yes. It seals the gun good. I even pour teak oil into the screw holes before I screw them in so it seals the wood in the wholes too. You just have to re apply a coat of teak oil every ~6 months. You can research on google about teak oil finish on spearguns.

[@xatirdaeva5506]

Wonderful !! But can u make some for people? If they have an idea to one spear. It's really a dream to have this own speargun

[@petrostsolkas1981]

Μπράβο ρε μάγκα ωραίο..όπλο..πως το έχεις σεταρισμενο...κ πάλι μπράβο.

[@AndrianBLUE]

Σ ευχαριστω Πετρο! Να σαι καλα! Το εχω με 3 cressi g20 σε 3.2 συντελεστη και 7αρα βεργα 1.30. Τωρα ξεκιναω σιγα σιγα να φτιαξω ενα 110 με καποιες αλλαγες που εχω κανει στο σχημα!

[@petrostsolkas1981]

Ωραίο set up.. μπράβο κ καλή συνέχεια..

[@sharizadam4426]

This is the best video of making Speargun , why you just have 78 Svb? .. keep making new gun man.

[@AndrianBLUE]

Thank you! I have very few subscribers because I am relatively new to KZbin! Speargun building is as addictive as spearfishing itself! I will definitely build more!

[@sharizadam4426]

@@AndrianBLUE its a great content , keep it up..

[@AndrianBLUE]

@@sharizadam4426 Let's hope a solution will be found soon about the pandemic so we can all go back to our routines! Have a nice day!

[@Ross-ts2kk]

A question, is Meranti wood good for making spearfishing gun? Like durable what is cons and pros? Thanks

[@AndrianBLUE]

Hi. I haven't used meranti so I do not know how durable it could be. I have started using teak for my builds which is one of the best options (if not the best). Check out my latest build video.

[@Fabio66nelblu]

Good job!! I prefer heavier shaft, 7.5 or 8 mm, they are faster and offer greater throw range.

[@AndrianBLUE]

Maybe I will try a heavier shaft in the future

[@Fabio66nelblu]

@@AndrianBLUE Yes, maybe when the big fish arrive ...

[@AndrianBLUE]

@@Fabio66nelblu Yeah! :-)

[@peyopires2676]

Wowww its amazing. How many Time TO build it ? With plan on computer ? What is your cnc? What logiciel ? Very Nice

[@AndrianBLUE]

Thanks! As I said to another viewer the machine needs around 7-8 hours just for the machining. But there is a lot more time spent on other tasks too. I don't even know how many hours have I spent on the design. And I still do refinements. I started the first design about a year ago. The cnc is a diy project. I designed it and built it with my brother. :-)

[@ronssportsadventures5411]

Woww..!

[@AndrianBLUE]

Thank you! Check out my latest videos to see how the speargun design has been developed!

[@chris_ellem_freediver]

Great gun. But super impressed with your CNC machine. Did you design and build it yourself.

[@AndrianBLUE]

Hi. Yes I designed the machine and built it with my brother!

[@shaanamir4631]

superb . beautiful gun man buoyancy is at perfection . did you add weights to it ?

[@AndrianBLUE]

Thanks my friend! Yes I have used lead to balance its buoyancy. One pocket in the grip and one pocket around the middle of the stock.

[@PBKanas]

What machine is this? Looking for an entry-level one myself.Beautiful work.

[@AndrianBLUE]

Thank you. The machine was designed and built by me and my brother.

[@fishingwithmax8248]

How do you figure out how much lead you need to put in the gun so it doesn't float?

[@AndrianBLUE]

The first time I get it in the water I have pieces of lead with me that I hang on the speargun one by one and check its buoyancy until I see how much it needs.

[@ulyssescalingo7497]

Amazing👌👌😍

[@AndrianBLUE]

Thank you! Check my latest videos to see how the design has evolved!

[@TheOutcastSumba]

omg.. that's was a really long shot... my gun does not even beat the half that range...

[@AndrianBLUE]

Yeah I have setup this gun for long shots! :)

[@TheOutcastSumba]

@@AndrianBLUE what brand of rubber did you use... and how big is it in diameter? do you set the pretension or let the band lose if not loaded and after loaded how elongated the rubber bands are? I love the way your speargun floats in the mid-water...

[@TheOutcastSumba]

I watched it over and over, but still can't believe you hit that fish from that distance...

[@AndrianBLUE]

@@TheOutcastSumba I use 3x Cressi g20 bands. They are at 3.2 ratio and they are pre tensioned. The neutral buoyancy is a great feature cause you can be more relaxed when holding the gun!

[@TheOutcastSumba]

@@AndrianBLUE thank you for the information, i think i gonna change my band setting, i use salvimar 16mm s400 with 3.5x times elongation if loaded. But the gun seem not powerful enough,. It has more power with my old 16mm beuchat band..

[@hassanpesca]

Suerte buen video 👍👍#HASSANOESCA#

[@andreapanarello6336]

Bellissimo fucile che misure fate grazie e se si può sapere il costo

[@AndrianBLUE]

Thank you. The speargun is not ready for sale yet. I am still testing and refining the design. I will be able build up to 110cm with my current machine. If all goes well I hope in the future I will have a bigger machine for bigger builds!

[@mariocinque8588]

Compliments very beautiful work.

[@AndrianBLUE]

Thanks again Mario!

[@MrAleksander99]

What CNC are you using and if it's DIY can you share the plans if there are any

[@sebastiandelamaza8440]

what kind of bearings did you used for the pulley? i mean to withstand the salt water overtime

[@AndrianBLUE]

I use ceramic bearings in the front wheels and the pulleys are the Harken 404 pulleys.

[@williamteuira5943]

Hi,how much for a gun like this?

[@AndrianBLUE]

Hi. Thank you for your interest. I am not ready to sell the gun yet. I still do some tests and refine the design. So I still haven't decided a price for it. I will upload more videos from builds later and I hope soon I will be ready to build spearguns for others. Cheers!

[@juannavasroman8403]

Perfecto Adrian 👍😉 me encantaría tener uno igual ...podrías construir uno para mí 😃?

[@AndrianBLUE]

Thanks. The speargun is not ready for sale yet! I am still doing some tests!

[@zacharyrogers9166]

Like your build! How would you feel about customer build your design but my trigger mechanism and riffe shaft?

[@AndrianBLUE]

Hi. Unfortunately we don't build the speargun with different trigger mechanisms. The only trigger mechanism that fits is the ermes double roll wings. The design of the speargun has changed a lot since this video. You can check it in our website andrianblue.com

[@YGTheBestDnzel]

Добрый день! Можете поделится 3д моделью вашего подводного ружья?

[@almostauthentic1363]

Hi! How does a trigger mechanism work? Did you buy or make your own trigger

[@AndrianBLUE]

Hi. The trigger mechanism is from Ermes. You can watch our latest videos on our channel to see how the speargun has evolved.

[@ths1158]

Para poli oreo oplo pragmatika mpravo!! O mixanismos skandalis pou xrisimopioises ine o Ermes Double Roller?

[@AndrianBLUE]

Ευχαριστω! Ναι ειναι ο ermes double roll wings

[@ths1158]

@@AndrianBLUE Aa poli orea, ithela kegw na kano kapia stigmi idiokatskevi sigkekrimena me afto to mixanismo. Pragmatika to ksanaleo poli oreo to oplo pou eftiakses!

[@AndrianBLUE]

@@ths1158 Σ ευχαριστω και παλι! Ο μηχανισμος μ εχει αφησει απολυτα ευχαριστημενο. Τωρα φτιαχνω αλλα 3 και παλι πηρα τους ιδιους μηχανισμους.

[@ths1158]

@@AndrianBLUE Ne apoti exo dei online in apo tous pio empistous mixanismous. Teleia, tha perimenoume ke alla video otan vris ton xrono!

[@anubis9663]

your video is super!!!!!!

[@AndrianBLUE]

Thank you!!!

[@sinyopoenya]

how much if i want to buy this ..

[@AndrianBLUE]

Hi The speargun is not ready for sale. I am testing and refining the desgin!

[@Cheninator96]

What finish did you use one the wood?

[@AndrianBLUE]

Hi. The finish is teak oil.

[@Cheninator96]

@@AndrianBLUE How is it holding up and how many coats did you apply?

[@AndrianBLUE]

@@Cheninator96 It is holding up fine. You just have to reapply a coat of teak oil every 6 months or so. I don't know how many coats I applied but they were a lot. The first day I applies a few coats because when it was unfinished it absorbed the first coats really fast. Then when it stopped absorbing it I started applying a coat and wet sand it with 800grit, let it sit for half an hour or so, then wipe it of and let it dry 24h. Next day again the same thing. I did it for 10 days or something like that.

[@cristobal8620]

Hi Adrian! Im Cristobal from Chile, i love your video, i have been trying to design and carve a speargun with a cnc machine here but it has been a massive failure every time i try, is there any chance you could send the files to make one like yours here? Greetings from Chile!

[@emrahgoksoy1875]

We stay home and you shot all the fishes :-) ( Ofcourse joking.) Be safe!

[@AndrianBLUE]

hehe! It was right before the quarantine! Now we just have patience...

[@malthus101]

Looks beautiful.... you sell them?

[@AndrianBLUE]

Hi. Yes you can check our products on our eshop. The speargun has improved a lot since this video! You can check them here andrianblue.com

[@rasidpardede6721]

How much does it cost

[@AndrianBLUE]

Hi my friend. Just saw your comment. It is not ready for sale yet. So I don't have defined a price yet. I still do some tests and refine the design. I hope I will have it ready soon.

[@aymenrachem9701]

What setup are you using from the diameter of bands 18 mm or 16 mm ? Thanks

[@AndrianBLUE]

Hi. If you check my latest videos you will see the design has evolved a lot. The setup I am currently using is 1x18 and 2x14 with 7.5mm shaft. I have used up to 1x19 and 2x17.5 bands with great results.

[@aymenrachem9701]

@@AndrianBLUE thanks bro just can you answer me what is the longest shooting distande.. 6 m ! From the new steup 1x19. 2x17.5

[@AndrianBLUE]

@@aymenrachem9701 With 110cm model and 1x19 and 2x17.5 maybe more than 6m. I have landed fish with 1x18 and 2x14 at 5.5m.

[@aymenrachem9701]

@@AndrianBLUE great result thank you so much for informations bro

[@AndrianBLUE]

@@aymenrachem9701 You' re welcome!

[@danijelkrivak2491]

What diameter and lenght of shaft do you use?

[@AndrianBLUE]

The shaft is 7mm in diameter and 130cm in length.

[@danijelkrivak2491]

@@AndrianBLUE it looks like is 8mm shaft , its really long shot. What was a distance cca?

[@AndrianBLUE]

@@danijelkrivak2491 I estimated the distance around 4m, maybe a little more, from the tip of the gun. Can't say for sure though.

[@danijelkrivak2491]

@@AndrianBLUE you make very nice speargun. Its simple but effective. Do you prefer soft or hard rubbers bands for invert? Reactiv or more progresive?

[@AndrianBLUE]

@@danijelkrivak2491 Thanks! I haven't tested different bands. This is my second build and i use on both of them 3x cressi g20 bands at 3.2 ratio. They seem to work great. Maybe in the future I will test different bands to have a better view of the subject!

[@miguelguerrero7372]

How can I order a 105cm one

[@AndrianBLUE]

Hi! Thank you for your interest. It is not ready for sale yet. I still do some tests and refine the design. I hope I can have it ready for sale soon!

[@ghadynjeim6713]

Amazing. Would you share the 3D file that you prepared for this?

[@Nagualis1313]

Hi Andrian. Amazing speargun it looks like you put a lot of thought and time in design. Do you think you will be selling spearguns after you finish testing? And do you think you would be able to make travel version like riffe travel which splits in the middle?

[@AndrianBLUE]

Hi. Thank you! This is my goal. The project started over a year ago just to build my own speargun. But during this process I realized that I really enjoyed and even got addicted to speargun building! After the first speargun which was a shorter 75cm version, which gave me a lot of information after testing it, I refined the design and build the one that is on this video! Unfortunately the pandemic has put a halt to our beloved hobby and I haven't done a lot of tests with it... I had the time though to work even more on the design on my computer and improved it. So my plan is to build some more, do more tests and have the speargun at the level I want it to be and then start selling it. I feel it is pretty close though!!! Then I will create even more projects like different designs and even other stuff! The travel version you mentioned is a good idea but I do not know if I will be getting into it. Maybe I will. :-)

[@Nagualis1313]

Thanks for reply will wait to hear when you are ready to sell them. All the best!

[@AndrianBLUE]

@@Nagualis1313 Thank you! Have a nice day!

[@albertosos4023]

Where can you buy this speargun? Thanks

[@AndrianBLUE]

Hi Alberto! Thank you for your interest! The speargun has evolved massively since this video. Here you can watch one of the latest builds! kzbin.info/www/bejne/g6uWkohvjNyKicU Soon it will be available on our eshop www.andrianblue.com. For any info you can contact us at [e-mail] Cheers!!!

[@mostebelkacc3631]

Type of wood please ?

[@AndrianBLUE]

The wood I have used is Sipo. Finished with many coats of teak oil.

[@mostebelkacc3631]

@@AndrianBLUE thanks

[@harryortega6869]

Hi Adrian, could you make one to sell it to me? And where do I get those metal parts?.....let's say if I try to make a wooden one, do you have a website that sells the metal parts? Thanks a lot! Very nice video!!!

[@AndrianBLUE]

Hi Thanks! The speargun is not ready for sale yet. I am still testing and refining. I hope soon it will be! As for the metal parts, the trigger mechanism is the ermes double roll. The rest of the parts like hooks and pins, are machined by me.

[@Radhooi]

Me too please, let me know when it's ready for sale Thanks

[@kimpadron9879]

awsome balance!!! how long is the s.gun?

[@AndrianBLUE]

Thanks! The gun has a length of ˜100cm from the wheels to the sharkfin.

[@tsaounlee]

Δεν ξέρω τι με έχει εντυπωσιάσει πιο πολύ: Το CNC? Το όπλο? Τα σχόλια κάποιων που σου ζητούν το αρχείο...? Μπράβο για όλα!!!

[@AndrianBLUE]

Σ ευχαριστω πολυ! Αν δεν εχεις δει τα ποστ μου και στο φορουμ (jimskeet ειναι το nick μου) το εχω βελτιωσει αρκετα το σχεδιο. Εχω κανει αλλες 3 δοκιμες μετα απο αυτο του βιντεο και αυτη τη στιγμη ετοιμαζω την πρωτη μου κατασκευη με teak.

[@tsaounlee]

Έλα ρε φιλαράκι!!!Δεν είχα δεί το θέμα σου στο φόρουμ και δεν ήξερα πως είσαι εσύ.Μπορείς να μου στείλεις με pm το σχετικό θέμα ή να το αναρτήσεις εδώ?Και πάλι μπράβο!

[@AndrianBLUE]

@@tsaounlee Ειχα ανεβασει αυτο το βιντεο που ειχα κανει μια δοκιμη με καποιες αλλαγες στο σχεδιο kzbin.info/www/bejne/sHWnoWqimLGWjtE το οποιο ειναι 75αρι σε μηκος. Και αν δεις τα 2 τελευταια μου βιντεακια φαινεται η τελευταια κατασκευη που εκανα που εχω προσθεσει και λογοτυπα. Σ αυτο που φτιαχνω τωρα χρησιμοποιω teak και εχω προσθεσει και οδηγο απο εποξικη ρητινη.

[@charlessecula7105]

How much the Speargun this one

[@AndrianBLUE]

Hi. The speargun is not ready for sale yet. I am still testing and refining the design!

[@Kostas_Stathakis_panelistas]

Απίστευτο αποτέλεσμα! Δεν θέλω καν να σκεφτώ πόσο χρόνο σου πήρε για σχεδίαση και υλοποίηση ! 😅 Πραγματικά πολύ καλή δουλειά ! Το κόστος του τώρα που το έχεις ήδη φτιάξει για παραγωγή ποιο είναι ;

[@aymenhadjsalem2064]

great speargun but did u use a stainless steel bearing??

[@AndrianBLUE]

Thanks. The bearings in the photos are stainless steel, but have been replaced with ceramic. I tested stainless on my previous build and now I am testing the ceramic. It seems like ceramic is the ideal bearing for this application. They need no lubrication, have no seal, are more resistant to corrosion and more resistant to scratches and wear.

[@aymenhadjsalem2064]

@@AndrianBLUE yeahhh even more better, i make invert roller muzzles with cnc just like it. building spearguns is so addicting even more then spearfishing itself.

[@AndrianBLUE]

@@aymenhadjsalem2064 Indeed! I am waiting for quarantine to end so I can go buy more wood and keep building more!!!

[@aymenhadjsalem2064]

@@AndrianBLUEwhere i can find cad file like that, u encourged me to make one like you, only problem i have only 700mm on x axis.

[@AndrianBLUE]

@@aymenhadjsalem2064 I have modeled the speargun from scratch using Fusion 360. I don't believe you can find a cad file somewhere. You have to create it yourself. This is the hardest part of the process. 700mm of travel is short for spearguns but you can machine the stock in 2 operations for each side, by indexing and moving the stock in the X direction. ;-)

[@guidovastola7807]

Complimenti sarei interessato ad acquistare un tuo gioiellino se mi fai sapere le misure e prezzi te ne sarei molto grato bn giornata

[@AndrianBLUE]

Hi. Thank you for your interest. The speargun is not ready for sale yet. I am still testing and refining it. I hope that it will soon be ready!!! Have a nice day!

[@malikba]

Hello, I am on the same path as you and also using fusion360. I have a lot of questions for you about the way you made your loft on the body of the speargun, because I designed mine by creating slices of the body but the result is not perfect yet. If we could exchange by mail about the process this would be very helpful.

[@AndrianBLUE]

Hi my friend. The process is not something you can learn by email. You have to keep practicing on designing and you will learn what works and what doesn't. There are a lot of ways to design this. I used T splines on this model but it can be done in other ways too. I have spent countless hours on designing stuff on fusion 360. This design alone is a project that I started designing like one and a half year ago. So just keep working and working on your designs and the more you do it the more you will improve ;-)

[@malikba]

@@AndrianBLUE ok thank you! I'm working on mine since a long time too :) I've used T-Splines on the handle too but for the body I have in mind it's a little bit more complex. Thank you anyway for your great video, it's inspiring :)

[@tifcvan]

That't a lot of teak leftover.

[@AndrianBLUE]

indeed it is but there is no other way to do it at the moment on my machine. Also The 2 outter strips of wood on the initial stock are not teak. They are cheaper wood that are added for the purpose of having extra wood in order to be able to hold the stock on the machine.

[@AndrianBLUE]

By the way on this video the wood is not teak but sipo. I started using teak later. You can check my last videos.

[@francescodicasola6041]

Quanto costa un fucile fatto cosi

[@AndrianBLUE]

Hi. The speargun is not ready for sale yet and I have not decided yet the price that will have when I will be ready to build and sell. I am still testing and refining it. Thank you for your interest! ;-)

[@francescodicasola6041]

@@AndrianBLUE thank you i wait for your news because i own a nice shotgun

[@yacinexoxo8416]

3d model for cnc please

[@rasidpardede6721]

Είμαι από την Ινδονησία. Τίγρη παραγγείλετε αυτό το εργαλείο ... κλειδί μεταξύ beso

[@AndrianBLUE]

Hi my friend. I guess you used google translate but I cannot understand what you mean. Do you speak english?

[@arjolabajo8112]

@@AndrianBLUE he is speaking greek

[@AndrianBLUE]

@@arjolabajo8112 He speaks Greek but from google translate, and I cannot understand what he wants to say.

[@pierrispanagakos6468]

Καλησπέρα το κόστος του όπλου

[@AndrianBLUE]

Καλησπερα. Νομιζω σε βρηκα στο facebook και σου απαντησα εκει γιατι ακομα το ψαροντουφεκο δεν ειναι διαθεσιμο για πωληση. Ειναι σε φαση δοκιμων. :-)

[@pierrispanagakos6468]

@@AndrianBLUE ευχαριστώ πολύ θα δω και θα σας πω

[@pierrispanagakos6468]

@@AndrianBLUE δεν μπορώ να βρω , αγαπητέ κύριε,εδώ και 20 χρόνια έχω ξύλο όπλα ρόλερ όλα τα μήκη , χρειάζεται μεγάλη προσοχή στα ξύλα για αρπάζουν εύκολα στραβά ξύλα , καινούργιο όπλο 2, μηνών 2πλω ρόλερ μου στραβοσε ο οδηγός και ο κατασκευαστής δεν αναλάβει τις ευθύνες του μια κε δίνει για μια ζωή εγγύηση

[@laudeirmgeraldomarcelinoge8659]

Não economizou madeira, com uma maquina boa dessa daria três.

[@AndrianBLUE]

With this wood dimension you could not have 3 pieces. The stock width is 130cm and the actual speargun measures in its widest point, 85cm. Yes there is more wood wasted than normal but I need the extra wood on the sides so I can hold the stock down on the machine table. If I have a narrower wood stock, there is no place where I can hold it. If I had a different machine with a much longer travel on the X axis I would be able to have a narrower stock and hold it from the front and the back but that is not an option on the current machine I have.

[@ngarmy6602]

Make video spearfishing on dis gun

[@AndrianBLUE]

I want to!! Bad we are quarantined at the moment here in Greece. Let's hope this pandemic gets under control soon.

[@ngarmy6602]

@@AndrianBLUE yes

[@ngarmy6602]

@@AndrianBLUE I am fifteen years old and i started diving with a speargun at the age of 10 i had a small speargun with a 10 year started with 30 cm speargun now I got 75 cm 90cm and 130cm with 15 years old 👌 and I am very persistent ✊✊✊✊

[@AndrianBLUE]

@@ngarmy6602 Keep going with that passion!

[@ngarmy6602]

@@AndrianBLUE ok

[@carmelom3027]

Can you send me a 2d design ?

[@abushouke]

Не могли бы вы продать файл ЧПУ, чтобы скопировать пистолет не для коммерческого использования?

[@AndrianBLUE]

Hi. The CNC design is not for sale.

[@hicheiisi9857]

hello adrian good jobe can you send me design thank you very much

[@steevenshioe3732]

Hi man hiw are you to day

[@ilokanodaytoy1867]

can i have one.pls..fr.philippines

[@AndrianBLUE]

Thanks for your interest! I am close to being able to build for others. The design has improved a lot since this build. You can contact me at [e-mail]

[@mrrius6553]

can i borrow

[@AndrianBLUE]

hehe!

[@ARISKONSTANTARAS]

Λαικ902

[@AndrianBLUE]

😄 Σ ευχαριστω φιλε! Εχει εξελιχθει σε τεραστιο βαθμο η κατασκευη του ψαροντουφεκου. Συντομα θα ανεβει καινουριο βιντεο!

[@2ftdivers199]

Hm?

[@AndrianBLUE]

??

[@白薇雯-u7s]

你有賣魚槍嗎

[@AndrianBLUE]

Hi. For any info you can contact me on my email address [e-mail] in English please!

[@Manu-Paula]

Finger weg von den vegan müll Inhalts Stoffe prüfen lach kannste direkt Wandfarbe essen den die Inhaltsstoffe sind identisch Kannste selber prüfen oder einfach mal KZbin nutzen

[@pierrispanagakos6468]

?

[@jamesbajada2843]

I can only imagine how much you will priced it for, when you did nothing with your bare hands only rely on the stupid computerise machine. And you will price that more then a spear gun done by the old fashion tools

[@AndrianBLUE]

Thank you for your input my friend. I designed and built the "stupid computerise machine" myself. You can go get a similar "stupid computerise machine" yourself and build stuff doing nothing with your bare hands too. No one is stopping you. Have a nice day :-)

[@josearmendariz6072]

James Bajada can’t believe you typed this on a computerized machine! Can’t you handwrite a letter and mail it?

[@andreytamahkyarov]

Ey saying to stay home after the video when you clearly weren't home is rude ... FFs

[@AndrianBLUE]

The day of the dive was before the quarantine. I have been out of the sea very long and just wait patiently like a lot of other guys do. So don't rush to conclusions my friend ;-)