The final operation on the special cutters for roughing the segments.
Пікірлер: 267
@Guzziv7Sport6 жыл бұрын
American ingenuity and craftsmanship at its best. Thanks peter for taking the time to share your knowledge and the excellent video
@nebojsailic995 жыл бұрын
You are superstar. I would spend a years working with you for free,just to have a piece of your experience. Great job👌
@Cmtb125 Жыл бұрын
Your videos have made an impact on my machining, and my life. Thank You for taking your time to create these master pieces.. Anyone that is in the machining world, will understand the infinte amount of fine detail and highly skilled trade that we have been blessed to become a part of. Creation is key
@daveanderson23166 жыл бұрын
Thank you for your time and effort Peter. Your videos are very well done, don't change a thing.
@thomaslamora16796 жыл бұрын
I am fascinated and mesmerized watching this. Just amazing to watch something so complex be created seemingly easily and accurately.
@bigdaddy76705 жыл бұрын
Picasso produces another masterpiece. Nice mounting fixture you made for holding the cutter!! I like the step over each round insert has. Excellent engineering work on the cutter.
@noahbarrow79794 жыл бұрын
Just absolutely breathtaking. A true inspiration to someone like myself who is always keen on learning more about machining. Sending positive vibes from NYC!!!
@EdgePrecision4 жыл бұрын
Thanks Noah! NYC👍💪🇺🇸!
@bigbattenberg5 жыл бұрын
Amazing video as always. Great comments. Funny is that our cat really like soft speaking voices and your videos are perfect! She is usually fast asleep within 10 min. or so. So, you are valued by both human and pet!
@Th3_ENGINE3R4 жыл бұрын
I could watch these videos all day long. Great stuff!
@nash04276 жыл бұрын
Peter, beautiful job! Thanks for sharing.
@arnljotseem87946 жыл бұрын
You do amazing work Peter, and you are really good at explaining what you want to do, and the process to get there. Being a one-man operation you have some very interesting projects, and you probably get these because people know that you are good at what you do. I also think your Mazak is an amazing machine. It is definitively a lathe, but it is a mill as well. Like some of those manual lathes with a milling post. Cool stuff, and keep it up. From Norway: Thanks.
@jonathankowalczyk54356 жыл бұрын
Fantastic!! You can really see the skill in your work!
@romgerrun6 жыл бұрын
Awesome work as always. thank you to take the time to share it with us
@masjr52704 жыл бұрын
Beautiful work and design!
@JonesAndGriesmann6 жыл бұрын
WOW incredible work to see. Thank you for the video.
@DRrandomman226 жыл бұрын
Awesome, great demonstration of the machines capabilities
@larrymatsumoto77306 жыл бұрын
Your work is outstanding, great job
@specforged56512 жыл бұрын
This stuff is absolutely incredible. Don’t get me wrong, I love my little Bridgeport and Monarch, but it’s amazing the profiles and shapes that are possible with a machine like this. Also, I really appreciate the explanation and knowledge you share. Means a lot to a hobby/newer “machinist” like myself. Keep up the great work! New subscriber for sure!
@Mcfryguy55556 жыл бұрын
Now I want to see the tool run. Thanks for sharing! Love the videos.
@EdgePrecision6 жыл бұрын
I may have some video clips. If so I will post one on Instagram.
@anonymousgeorge43216 жыл бұрын
Beautiful work. Thanks for sharing.
@craigs52126 жыл бұрын
Peter, thanks for the really nice videos. I am always amazed at what you can make these cool machines do. Sure makes my CNC'd J-head Bridgeport seem like a stone age ax. Craig
@EdgePrecision6 жыл бұрын
The very machine I started on.
@drummerhammar6 жыл бұрын
Once again great work, thanks for sharing!
@pieterbotes89385 жыл бұрын
Very nice. I can see that this took some serious programming!
@okelloraymond21155 жыл бұрын
a great video, great work and great skill....i would really love to see that cutter in action
@MakinSumthinFromNuthin6 жыл бұрын
Peter, you are amazing....like watching NASA type work being done. Thanks for sharing
@chuckphilpot77566 жыл бұрын
Makin Sumthin From Nuthin NASA type work? Lmao
@xenonram5 жыл бұрын
@Sxt NASA does all sorts of different work. Most of the work Peter does he has to hold tolerances just as tight as NASA.
@justinmoritz65433 жыл бұрын
@@xenonram In fact, Peter has said in a different video that he's MADE stuff for NASA.
@rizdalegend6 жыл бұрын
I'm glad I found your channel last year, and even more happy to see your subs increase! As always, concise, professional, and streamlined!
@EdgePrecision6 жыл бұрын
Thanks Aaron; last year this time I think I only had about 500-600 subs.
@thondupandrugtsang5 жыл бұрын
I'm no machinist but it's fascinating to watch these amazing machines
@PaulSteMarie5 жыл бұрын
Finish on that is absolutely gorgeous. I'd love to see the tool in use.
@jtschemenauer90776 жыл бұрын
That is some beautiful tooling.
@ollinboardcompany82066 жыл бұрын
beautiful work!
@danb57215 жыл бұрын
Amazing work peter
@TomMakeHere5 жыл бұрын
Beautiful! Great work
@blob_876 жыл бұрын
Seriously impressive.
@williamhoward83195 жыл бұрын
these new machines just facinate me with all they do they did nor exist to my knowledge years ago
@aly-tek71906 жыл бұрын
Awesome work Peter :) Will you show the cutter in action once finished please :D
@EdgePrecision6 жыл бұрын
I may have some video clips of it running. I will check.
@metalmogul46914 жыл бұрын
Once again just amazing.
@basharalngar15674 жыл бұрын
I liked what you've done
@allanmorgan49765 жыл бұрын
Awsome love your work👍
@user-ct5hk8py7v6 жыл бұрын
love it... epic job
@drichard126 жыл бұрын
Another great video.
@williamhoward83195 жыл бұрын
i did some machining in the navy and worked for day &NIGHT HEATING AND AIR AS A MECHANIC MAINTAINING SEAM WELDERS AND PUNCH PRESSES AND PRES BREAKS FOR 8 YEARS I RETIRED AFTER 21 YEARS WORKING FOE A LIMESTONE QUARY
@helicopterjohns6 жыл бұрын
Nice Work! Thanks for sharing.
@bluedeath9966 жыл бұрын
Add an ND filter to your hero6 it will fix a lot of the blowout, and add a little extra protection as well. A polarising filter would reduce reflections too.
@salaparicio85686 жыл бұрын
Nice video and thank you for sharing.
@samuelrathbone90966 жыл бұрын
You are amazing man
@blacksupra106 жыл бұрын
such excellent videos.
@craigwalker32563 жыл бұрын
Gee I really like your videos thanks!!
@EdgePrecision3 жыл бұрын
Thanks Craig!👍🖖
@mamoshimamoshian90785 жыл бұрын
Beautiful Job well done....:)
@rupert53906 жыл бұрын
fantastic video - your channel is amazing - who needs sandvik - just make your own.
@63256325N6 жыл бұрын
This is probably the wrong term to use but that's one pretty tool! A job well done. Thanks for the video.
@jeffhankins66166 жыл бұрын
Very nice work...
@nubz965 жыл бұрын
Truly amazing
@Fischer9776 жыл бұрын
Wow! So nice!
@user-kq4xc4bg9c5 жыл бұрын
Good job, I liked it.
@HP_rep_mek6 жыл бұрын
So nice!
@TrPrecisionMachining6 жыл бұрын
very good work
@tomsemo81866 жыл бұрын
Brilliant.
@flashpointrecycling6 жыл бұрын
Peter, with the round inserts staggered at three levels can you show us an example of the tool marks it leaves? Beautiful tool! Thanks
@EdgePrecision6 жыл бұрын
In the previous video there is a picture in a picture that shows the parts. It shows the surface it leaves. Remember this is a roughing tool so it leaves a scallop surface.
@Sicktrickintuner6 жыл бұрын
That is pretty sweet, love lit all, just wished I had a machine like that.
@CapeCodCNC6 жыл бұрын
Very nice!
@miles323235 жыл бұрын
incredible
@brandontscheschlog6 жыл бұрын
This is awesome! Any videos of it in action?
@josebarbosasilvafilho4955 жыл бұрын
Excelent video
@JCisHere7786 жыл бұрын
Very well done! Is there a chance we might see one of these in action? cheers, Johannes
@ligius36 жыл бұрын
At around 7:00, the shot seems underexposed because there is a bright pattern at the left, which messes the camera metering. You can either switch to spot/center metering (if available) or find a way to darken that side. The GoPro tends to focus in the center, so the shot should be framed such that the background does not sit right at the center. For the "high-speed" shots either there isn't enough lighting or the lights are pulsating. Thank you for the videos and the R&D topics.
@bluehandsvideo6 жыл бұрын
Great video! I'm really enjoying your work. If you're only using one camera to get all those angles, then my hat's off to you! That's a ton of video editing to achieve your style!!!! I'm in love with this machine! Thanks!!!!
@EdgePrecision6 жыл бұрын
Thanks bluehandsvideo; Yes there is just one camera. I means I have to stop move the camera and start the program a lot. Fortunately on a CNC machine this inst to difficult to do with the single block function key.
@bluehandsvideo6 жыл бұрын
Dang! I know exactly how much work that is! Way more than I've been willing to do! LOL I'm only running mach3 and I don't trust the feed hold at all on it!! Since you're doing multiples of the same part, you can run each part with a different camera position and then do all the work on the computer. But.....knowing just how much grief and time are involved in the editing end of these vids, sometimes it's a lot easier to get shorter clips that are more specific and then splice them. I'll end up letting my camera run for the duration or until I know I've gotten the final tool paths. It can take quite awhile to whittle 2+hrs of vid down to 10min. lol Thank you for the time/effort you're putting into your vids! :)
@ederhsm21216 жыл бұрын
Nice jobs....
@thewho3336 жыл бұрын
I really enjoy watching your videos, thanks for sharing! Since the GoPro cameras really don't do a good job with the high frame rates could you please skip the slow motion parts? It might just be me but I find myself loosing interest when there is a "blurry" slowmo clip.
@userwl28506 жыл бұрын
Beautiful. What steel was it made from and was it heat treated?
@EdgePrecision6 жыл бұрын
Thanks userwl2850. These cutters were machined from commercial heat treated 4340 steel. That would make the hardness around 34-38 Rc. The first cutters I also made out of the same material and they have held up real well.
@Molb0rg6 жыл бұрын
nice video )
@Guds7776 жыл бұрын
Bravissimo...
@Fr1day-RT6 жыл бұрын
Very cool. I've been looking forward to this since I watched the first one. Could you show a shot of the finished slot/groove on the part please.
@EdgePrecision6 жыл бұрын
If you rewatch the previous video. In a spot I show a picture in a picture in the upper right of the video. Those are the parts I rough with these cutters.
@Fr1day-RT6 жыл бұрын
You did indeed I missed it the first time. Great videos. You do a lot of interesting stuff that I don't see elsewhere on youtube. Also that machine of yours is very cool.
@prototype3a6 жыл бұрын
I know you just made that beautiful enclosure for your GoPro but you should check out the Sony RX0. It's about the same size as a GoPro but it has a vastly superior sensor in it. I have a RX0 that I've played with a lot and I think if they make a mk2, it could be really amazing.
@EdgePrecision6 жыл бұрын
I will check into that. I like the build quality of the Hero6 over the Hero4. I’m not sure yet if it’s better than the Hero 4 camera.
@FesixGermany6 жыл бұрын
How does it perform? Are you satisfied with these?
@waynep3436 жыл бұрын
as for the lighting.. Abom got a ring lamp from somebody for his vertical mill.. fits in an existing hole. i wonder if a battery powered LED ring lamp could be fastened to your spindle face.. perhaps with different rows of Leds aimed in different directions.. with the switch ability to change the lighting pattern.. heck might be able to fab that up in plastic.. right in your own shop.. one thing.. you would need to test several LED colors.. to come out with an assortment that create normal white full spectrum light.. so its not such a single spectrum of light.. i realize this video is several months old..
@trevorwebster38246 жыл бұрын
Great video, love your work. What insert is that cutter designed for?
@EdgePrecision6 жыл бұрын
Thanks Trevor; The Insert is a Iscar RCMT 1204M0-14 IC907 Grade.
@ianpendlebury37046 жыл бұрын
Beautiful result. This is probably a stupid question, but if you don't ask, you don't learn! Why are the inserts on a spiral pattern around the cutter body?
@EdgePrecision6 жыл бұрын
The cut width is .915 wide. The inserts are 10 mm in diameter. In order to cut that width the inserts have to be staggered. The cutter has 8 inserts but is really a two flute cutter.
@Jeralddoerr6 жыл бұрын
I'm not a pro but I'd also like to add that this also makes the cut per tooth less work on each tooth per revolution.. kinda like offset teeth on all types of saw blades.
@EdgePrecision6 жыл бұрын
Daniel Gilbert I think what he is referring to is the profile shape of each tooth. What you are referring to is the set of the teeth on a saw to make the kerf wider than the back of the blade. I have bought table saw blades where one tooth cuts to one side the next tooth cuts in the middle and the next to the other side. This is similar to what this cutter is doing. There are two inserts that cut toward the end face. The next two cut half way up in the middle. The next set half more. The last set cut at the upper face toward the shank. So 8 inserts in two sets of 4. Or two spiral flutes with 4 inserts each.
@Jeralddoerr6 жыл бұрын
Daniel Gilbert no....... no.. no.. think about it... take look at a circular saw blade... every tooth is offset.. 1 , 2, 3, over and over so that when you feed in the material the next tooth doesn't have to do so much work... I'm not saying he designed the tool this way for that reason but as a resolute his tool/machine absolutely benefits. The more teeth on your cutter the more horse power your machine needs to complete a revolution.
@Jeralddoerr6 жыл бұрын
Daniel Gilbert ... wow great job... you don't feel comfortable talking about something so you "lol" it off? It is what it is... there's not a lot of factors....
@micahadams26 жыл бұрын
Love your videos. Odd question but how much coolant will that machine hold? How often do you top off the coolant level?
@EdgePrecision6 жыл бұрын
I’m not sure the exact coolant volume. I would guess about 200 gal. Most of the coolant gets carried out by the chip conveyer. When running the machine constantly I think I make up coolant about every 1.5 weeks.
@chadbakkene50565 жыл бұрын
Love watching your videos. One question. When roughing out the insert pocket, why not use a larger endmill and plunge it to get the majority of the material out, rather than wearing out the tips of 3/16" endmills?
@EdgePrecision5 жыл бұрын
Thanks Chad! The endmill is actually roughing the angle in steps on the insert pocket walls. That way the special endmill that finishes the tapered walls has less load on it. Plunging a end mill straight into something usually doesn’t work very well. But if I ground a form tool that could work. I usually try not to use any more special tooling than absolutely necessary.
@allancnc2 жыл бұрын
Nice tool Peter, what material is it, please? In the Hurco machines you can get a software-option where many different seats for inserts can be made, both milling and turning tools, really clever thought.
@kristianSilva956 жыл бұрын
Great video with some quality machine work as always! Have you got any big projects on the horizon?
@EdgePrecision6 жыл бұрын
There is a up coming job out of Inconel 718 150 ksi (very tough material to machine) that is rather complicated. Not a real large part (about 4" dia. stock x 19.5 long) but its somewhat involved as far as milling/turning goes. There are seven parts to make.
@kristianSilva956 жыл бұрын
I look forward to seeing videos of it
@bassfishermanify5 жыл бұрын
That looks awesome. Do you have any video on the finished product being used?
@EdgePrecision5 жыл бұрын
I did make a video showing these cutters in use. It was the one and only video one of my customers asked me to take down. They were concerned that their competition would see it.
@bassfishermanify5 жыл бұрын
@@EdgePrecision I completely understand, the finished product looks awesome.
@kisspeteristvan6 жыл бұрын
the tool looks like a brand name tool , great result . Will you put black oxide or some protective layer against corrosion ? . On a side note , i would like to see some heavy machining sometimes , i know that machine can handle at least a 6mm radial depth of cut (turning).
@EdgePrecision6 жыл бұрын
As the jobs come up is how your seeing them. If the job has heavy machining you will see it.
@ipadize5 жыл бұрын
for the threading you could put a can full of oil in the machine and everytime you want to tap just dip the tool in the can and there is new oil on it :)
@EdgePrecision5 жыл бұрын
What if you had to tap holes in the horizontal mode? I have used a wire brush to remove shavings off a tool. Just stop the spindle bury it in the brush reverse at slow speed while reversing the spindle. I have also thought but never tried it. To change to a tool with a Allen wrench and use it to remove screws and move them in a fixture. But like I say I haven’t tried this.
@nickl39816 жыл бұрын
Awesome video edge. Looks like fun making your own Cutters! How much do you offset the insert screw hole to pull the insert into the pocket? Do you prefer 4340 ph to 4140 ph for cutter bodies or is it more available in your region?
@EdgePrecision6 жыл бұрын
In the case of these insert pockets the inserts being round the screws aren’t offset. With the tapered sides of the insert pockets surround more than 180 degrees of the insert. It hasn’t been necessary to put the holes off center.
@jacobfalk48272 жыл бұрын
Very complex part. And your tool lengths were all almost perfect, with barely any chatter. You make it look easy! What CAM do you use?
@scrout6 жыл бұрын
You should be known as Mr. Wizard
@HH-Machining5 жыл бұрын
Tips how to use the tool offsets with tapered end mills? :)
@EdgePrecision5 жыл бұрын
That would depend on how you program the tool path for a tapered endmill. I usually program the path for the bottom bottom diameter or tip diameter. Than its just like a regular endmill as far as offsets are concerned. The upper diameter or taper just cuts away more material. Some CAM software's don't automatically do it that way but you can usually make that happen by just using a bottom profile shape.
@Paulster26 жыл бұрын
When you were talking about the GoPro6 focusing, it looks like it's focusing on the background, not on the tool and work. This would make the work look terrible. At least this is what it looks like to me ... great video :o)
@EdgePrecision6 жыл бұрын
Thanks Paulster2; Yes I wish there was more control over the focusing options (Maybe there is and I haven't learned how). It would be nice in their GoPro app on the I-Pad to be able to touch the screen where you want the focus point. Something like some of the new cameras do with their touch screens.
@skeeterweazel6 жыл бұрын
How fast is the sub-spindle turning w/ the 1/2" cutter? Thx. Marty
@EdgePrecision6 жыл бұрын
The 1/2" endmill is turning a 4000 rpm. The feed rate varies because of the milling style employed but when cutting is at about 50 inches per minute.
@roronoazoro92289 ай бұрын
Do you have video of these tool in action?
@wellcoffeee6 жыл бұрын
hi Peter, you should try use a strobe light to get better images.
@nilzlima30276 жыл бұрын
dont forget the disco ball
@alysongr6 жыл бұрын
Very very nice job Peter! Let me ask one question... did you quenched the final piece?
@EdgePrecision6 жыл бұрын
Thank You Alyson Grassi; I don't know if you saw the first video about these cutters. In that video I say what material there made of. The material is already heat treated before machining. It is 4340 commercial heat treat. That would make it 34-38 Rc hardness range.
@alysongr6 жыл бұрын
Edge Precision no I didn't I've subscribed to your channel today and was my first video. Nice job man!
@alexcristian25934 жыл бұрын
That's awesome! What material is the machined part?
@EdgePrecision4 жыл бұрын
This material was 4340 commercial heat treat.
@jerryplumley15764 жыл бұрын
This answered my question. Thank you
@Uzik5 жыл бұрын
Look as T-tool Rd grooving multi insert
@adamguzik93506 жыл бұрын
Peter, you are a master. Great vid. What tolerance to these holders hold?
@EdgePrecision6 жыл бұрын
Nothing close at all this is just a roughing tool. If things on the parts were within .015" it would be close enough.
@glendenton31933 жыл бұрын
That’s awesome do you own a brown & sharp cnc grinder?? Or some other brand??
@EdgePrecision3 жыл бұрын
The grinder I own is a Star STG grinder. Not the company that makes the Star screw machines. It’s the same company that makes the Star gun drills. Here is a link if you are interested. www.star-su.com/
@glendenton31933 жыл бұрын
@@EdgePrecision thank you very much
@bcbloc026 жыл бұрын
Instead of using the ball nose end mill for profiling, why not run a regular endmill sideways with simultaneous rotation? Wouldn't that be a lot faster?
@EdgePrecision6 жыл бұрын
I'm actually cutting the radius on both ends and the flat in the middle to a angle. Only a form tool from the end could do that (I could grind such a tool on my grinder). Or a front and back corner rounder and a endmill.
@Jeralddoerr6 жыл бұрын
Ball endmill for what he's doing is the only way to go...
@TroubledTimes20246 жыл бұрын
Peter, what was the RPM you did the 5mm tapping? Very interesting!
@EdgePrecision6 жыл бұрын
The speed is 254 RPM and the feed on this machine = the taps lead in a tapping cycle. In this case a F.03149.
@TroubledTimes20246 жыл бұрын
Thank you.
@yassinebendhif45386 жыл бұрын
@edge precision: what is the matrial used to create this cutter ??
@EdgePrecision6 жыл бұрын
The cutters are made out of 4340 commercial heat treated steel. That would make the hardness range of 34-38 Rc. I mentioned that in the first video on this. Watch my previous video.