Specna Arms RRA SA-E25 EDGE 2.0 Unboxing & Gameplay

[@Thundeblade766]

You just got yourself another balkan subscriber from Slovenia

[@Balkan_Arsenal]

Thanks! I'll be sure to upload at least once a year. 😗

[@Balkan_Arsenal]

Thank you guys for watching and for liking the video! Getting close to 5,500 views! Drop a Like on the Video, if you found it helpful. 😇 It will help others see it and maybe grow my channel! Thanks again and have a great day!

[@brianridgley940]

i know specnas motors are a little whinier than usual, but this sounds really good on camera, I plan on picking up one of the edge series in the future and figure it out from there

[@Balkan_Arsenal]

Yeah, it's very snappy. You can make it even snappier if you turn on pre cocking and program the trigger. kzbin.info/www/bejne/ep6nYpqMjrJrbqssi=ZxLSxNq6Iw3ge0co

[@dtox1283]

my specna mk 18 with USMC logo is 4 yrs and it works..out of box and external trust e its mk18

[@Balkan_Arsenal]

My friend has his SA Core MK18 for years now and he plays pretty much every weekend. They are definitely built to last.

[@toshiba5800]

i love yours unboxing

[@Balkan_Arsenal]

Thanks! I will have many more unboxings on this channel. Just gotta get more money lol

[@DaddyWaga]

Great unboxing. But be careful pointing your guns out the window, people might think it’s a real steel gun!❤

[@Balkan_Arsenal]

Thanks, i try to be as careful as i can.

[@brodiebrown9754]

hi just wondering, does the battery go into the tube of the stock or is there space for it to go into the actual stock itself? Thanks.

[@Balkan_Arsenal]

There's enough space for a medium sized 11.1 lipo battery in the buffer tube (maybe your wires will be sticking out a bit), but you should have plenty of space.

[@picekmicek3341]

Are you going to show more of the woods map? That place was beautiful!

[@Balkan_Arsenal]

Yes, if it stops raining every weekend lol.

[@gergelysallai1141]

Hello! Can You tell me please what is that wire on the sight? What does it do or what the purpose of that? Thank you.

[@Balkan_Arsenal]

Hi! The wire connects the battery cap to the sight, so the cap kinda just hangs around when it's unscrewed, so that you don't lose it while you're changing batteries.

[@impactstockyy5591]

How did you take the muzzle off on mine there’s no grub screw and can’t get it to move at all

[@Balkan_Arsenal]

No grub screw on mine either. They probably glued it in place. Try applying heat with a heat gun or hair dryer, before uncrewing the muzzle. Or dip the muzzle in boiling water.

[@impactstockyy5591]

@@Balkan_Arsenal ah ok then was going to say cause it looks like you have a different flash hider on it towards the end kinda annoying

[@Balkan_Arsenal]

I can imagine. I never had to deal with glued muzzle devices. Dunno what the point to that is.

[@burntzapado2571]

Good stuff!

[@Denis_Audio]

Hey man I have exact replica and saw in some of your comments you mentioned you always change bucking and nub, can you elaborate more on that? Was there a big difference when you did that and which ones do you use? Thanks!

[@Balkan_Arsenal]

These days i would only change the bucking and nub if my gun has bad accuracy. I have a Maple Leaf MR hop 60 degree in two of my AEGs and they're pretty accurate with the BBs i use, but they were shooting just fine before. G&G green is also pretty good in my experience. Play with your gun and let the bucking break in, use heavy BBs outside like 0.30, 0.32 and then see how you like the performance. Using anything heavier 0.36+ on full auto is way too expensive for me personally. I only use those in GBBRs with magnified optics and only semi. The good thing about M4 AEGs is you can easily access your HOP unit and change barrels and buckings. Not everything is going to be perfectly compatible so you gotta experiment a bit. Some of the good ones are Maple Leaf MR hop 60 degree with omega nub, G&G Green, Prometheus purple, also Unicorn Airsoft makes some pretty good buckings.

[@Denis_Audio]

@@Balkan_ArsenalThanks again for detailed answer, will check those out! BTW which BBs you use most of the time Specnas EDGE?

[@Balkan_Arsenal]

@@Denis_Audio No problem, i'm happy to help whenever i can. I run 0.25s and 0.28s indoors, and outdoors 0.32s by BLS. After 0.32s the price jump is pretty noticable, but so is the performance, so i mostly run 0.36+ in my GBBRs.

[@Denis_Audio]

@@Balkan_Arsenalhaha nice! I'm from Lithuania so here we can only use 0.30 top for rifles. I started with 0.25, no will try 0.28 and then 0.3!

[@SLAVGENTasg]

Hello, Is it good enough? Id like to put a Da vinci 363mm barrel, Mapple Leaf MrHop and omega dystanser into it.

[@Balkan_Arsenal]

I have the ML MrHop & Omega nub in all my M4s. That's pretty much the golden standard these days as far as i know. I know PDI and EDGi make the best inner barrels. I'm not familiar with the Da Vinchi brand.

[@SLAVGENTasg]

@@Balkan_Arsenal here in Poland almost everyone says that the best 3 inner barrels are: ZCI < Lambda < Davinci

[@Balkan_Arsenal]

Yeah, i heard ZCI and Lambda are also pretty good. If you're unsure you can ask around Reddit. Plenty of information there.

[@fubene5495]

@@Balkan_Arsenal Are you going to ask on reddit? To read to 14 year old wankers opinions certified by their 7 month airsoft career???? PDI, not bad, but too expensive, EDGI not even as good as PDI and even more expensive, Lambda? Just a piece of crap that breaks and shreds buckings like mad, Prometheus same as PDI.... ZCI inox steel, pretty cheap your first choice, Maple leaf second choice, Da Vinci is good but no point on buying one if you have acces to ZCI. Not my opinion, this are the words from a tech that has been working on airsoft guns for more than 20 years. Bucking and nub makes a difference, inner barrels? not that much, only if you change the diameter or the lenght... but probably it will be a fail XD, tighter more fps usually, not more precision.

[@Balkan_Arsenal]

Alright, thanks for sharing.

[@drzx.R6]

Is this good for indoor games?

[@Balkan_Arsenal]

Yes, this model has a very short barrel, so it's great for CQB. Around 9 inches, maybe a little less. Just keep joule limits in mind, mine has around 1.5j.

[@vladneacsu]

Hi! What settings do you run on your GoPro?

[@Balkan_Arsenal]

All the default setting without the fish-eye effect. I have stabilization so the camera doesn't shake too much when i'm running. And i adjust my ISO as needed.

[@vladneacsu]

@@Balkan_Arsenal alright, thank you very much! Btw, do you film in 1080 or 2.7k?

[@Balkan_Arsenal]

2.7k but 1080 is just fine. I went with 1080 before to save battery life.

[@vladneacsu]

@@Balkan_Arsenal yeah, I wanna buy 2 Enduro batteries as well. Only have 1 that came with my GoPro10 right now.

[@Balkan_Arsenal]

Now i use an external power bank if my batter dies.

[@arthurlirafilho6678]

Never actually had any problems with specna midcaps...

[@Balkan_Arsenal]

Specna stanag midcaps were giving me problems. They wouldn't feed in my SA G01. These plastic ones i got with my replica are good for now.

[@arthurlirafilho6678]

@@Balkan_Arsenal Can't say anything about the stanag ones, never used them. Running mainly pts epm's 150s on my SA-E20. The plastic specna ones are my backups.

[@PratherEdits]

Do you reccomend this for the price?

[@Balkan_Arsenal]

It's worth it in my opinion. Very snappy with a 11.1v lipo, Gate Aster mosfet, precision barrel with a flat hop bucking. It is very fun to play with. The externals are okay, i just don't like the chipped edges on the receiver, but that's probably just my replica. Probably gonna end up painting it.

[@PratherEdits]

@@Balkan_Arsenal is the paint chipping or the recovery itself?

[@Balkan_Arsenal]

The paint is fine, it's pretty durable actually. I tried to show it in the video but the GoPro couldn't focus enough to get a clear view...The edges of the receiver aren't cut cleanly - there's a littly bit of chipping. But i'm gonna paint the replica so it's fine.

[@ihavenoiqq]

What would you say is the best aeg out of the box under $400

[@Balkan_Arsenal]

I'd say these Specna Arms 2.0s and CYMA Platinum if they sorted out the mosfets.

[@error262]

Cyma Platinum + Perun V2 Hybrid or Gate Aster. Best bang for buck. You even have some money left to spend on Maple Leaf bucking and barrel.

[@cassandrapavisic1922]

Is it just me or are you a lot braver in this video? :P

[@Balkan_Arsenal]

Yeah, lol i usually am when i wear my hard shell windbreaker. I still feel and hear when i get struck by a BB but it doesn't hurt at all.

[@ronald0122]

hello sir. Great video. What do you recommend for a beginner in europe for around 250-500 euro? m4 style rifle. i like the model G&G GC16 PREDATOR.

[@Balkan_Arsenal]

Can't really go wrong with G&G. Go for it If you like the look of it. I really like VFC M4s with the Avalon gearbox. I have my Saber Carbine and 416A5 and both are really good. Gunfire has some on sale rn for €460. All the Specna Arms Core and Edge are very good and reliable. Should last you for a while.

[@ronald0122]

@@Balkan_Arsenal thank you. how about the SA-E23 EDGE 2.0

[@Balkan_Arsenal]

@@ronald0122 It's pretty much the same as the E25 just different externals. Honestly i'd just go with the G&G PREDATOR and upgrade the bucking and nub. G&G bodies are really strong and should serve you well for a long time. Both polimer and metal M4s are really good quality.

[@ronald0122]

@@Balkan_Arsenal thanks again. So no downside it is using older/lower battery?

[@Balkan_Arsenal]

The oldest battery i've used was around a 1.5 years old. They go bad over time and it's best to replace them after some time. I usually carry several batteries in my lipo bag. At least two just in case.

[@mikoajgg3819]

Hey man what battery are you using in the video? Is it 11.1v or 7.4v?

[@Balkan_Arsenal]

11.1v with a tamiya adapter. I got a deans plug battery now and it's very snappy, i love it.

[@mikoajgg3819]

@@Balkan_Arsenal Alright thanks

[@timurkrkalic1379]

Hello i was wondering if you were ever gonna play at the hospital again?

[@Balkan_Arsenal]

Yes, as soon as i get a rifle flashlight.

[@Callsign_Kishin]

Are these gearboxes a lot more improved than the crappy last Gen?

[@Balkan_Arsenal]

Apparently the failure rate is really low on these. So last gen of the EDGE 2.0 line was crappy?

[@DoctorSquash]

I got an all metal version

[@rufmor1]

What's the model name?

[@-TakapihanTarzan]

What is the real life counterpart for this?

[@Balkan_Arsenal]

Looks like the M4A1 URGI with a 10.3 inch barrel.

[@-TakapihanTarzan]

@@Balkan_Arsenal thank you 🙂

[@alvarojfreixo]

RRA LAR-15 LE PDW SBR, 10.5 Inch

[@reen_san01]

O i like this

[@Balkan_Arsenal]

Thank you 💜

[@douglasalmeida1915]

Vou comprar uma desse mes que vem 😅

[@Balkan_Arsenal]

Nice! It's a great gun. The more i play with it the more i like it.

[@jthele]

That place looks so barren got to put up more cover

[@Balkan_Arsenal]

Field owners tried setting up pallets and stuff but everything useful gets stolen by the locals lol. We gotta work with what we have 🤷‍♂️

[@jthele]

@@Balkan_Arsenal dam that sucks should have had better security

[@Balkan_Arsenal]

It's very open. We often have random joggers and dog walkers passing through. But during the spring and summer there's lots of vegetation so it's easier to hide.

[@Esepibe_]

specna gearbox broke if full auto

[@Balkan_Arsenal]

Yeah, some gearboxes break after a few months, but some will last for years. Depends how you use it and how lucky you are.

[@mixadnmvr]

Sto nepricas na nasem

[@Balkan_Arsenal]

Imam subscribere iz cijelog svijeta pa da me svi razumiju.

[@mixadnmvr]

@@Balkan_Arsenal ok

[@Brick-182Pro]

“No one cares about this!” Me: :(

[@Balkan_Arsenal]

Sad facts