Specna Arms SA-f01 Flex line review

This time i'm reviewing another airsoft m4. this time its the SA-F01, Specna's latest flex line of airsoft rifles. The flex line is designed for people who want to get into the airsoft hobby by making an afordable yet decent rifle for people to use. Here we look at the SA-f01 but there are other models available (SA-f02 & SA-f03) but are these good airsoft beguinner guns?
Don't forget to subscribe
/ @dtwairsoft
DISCLAIMER:
This Airsoft channel is an educational one where the equipment I feature is only used for filming and airsoft gameplay that is done in a safe and controlled enviroment.
NONE OF THE ITEMS FEATURED ON THIS CHANNEL SHOULD BE USED OR EXPOSED OUT IN PUBLIC, AND SHOULD ONLY BE USED AT A PROPERLY INSURED AIRSOFT SITE.

[@Ndbike68]

i will buy this gun for my bday, thank yo dude i was gonna buy some sketchy plastic thing but now i know

[@DTWAIRSOFT]

Glad it helped 👍

[@raizenkishin4810]

recently got this Airsoft 2 Weeks ago, its my first Airsoft Rifle, Buttstock was loose. the Magazine either won't feed the pellets properly or keeps miss-firing, max and min hop up was Hard Low Left at 15 Feet and 45 Feet. and already passed my return day I should have tested it then and there. I guess learning it the hard way and hopefully when it gets inspected it can be fixed.

[@DTWAIRSOFT]

With the mag (I know it sounds silly but just trying to eliminate all possibilities) is it fully wound as in you keep winding after the bbs get to the top of the magazine? Also have you adjusted your iron sites front and rear? I would also check the hop rubber and see if it's actually pushing down with the hop all the way on. That's what I would check first

[@raizenkishin4810]

@@DTWAIRSOFT I will check again today, I did wind up the magazine BBs but I think I forgot to re-wound it after firing some of them. I have been adjusting the Sights as best as I can remember just like a real M16A2 but also trying to remember this is an airsoft. I would not know what a Hop Rubber is though. I will try today. Thank you for the advice!

[@Sidonio5]

mine dont have feed problems. the unique big problem is the precision, but its because the rubber buck its fixable. and sometimes when you spam the singlefire the gun stuck and you have to put auto and return to single

[@cmoawsh5532]

did you know where did we find the picatini rail for the hand guard ?

[@Arkt1sMan]

i have one of these, I have had trouble with the semi auto response. The trigger sometimes just stops working, and sometimes it doesnt feed, But i believe its the magazine. But aside from that its a good gun, i recommend

[@DOOM-fist]

Brought mine today it’s my first

[@DTWAIRSOFT]

I hope you enjoy it

[@johnnystacks9468]

Just picked on up recently, great review!

[@_kraken117]

Just bought one, feelin' good👍

[@chrismoore6362]

Is this a Picatinny Rail System for the front grip?

[@storm1us]

I don't know if this makes sense but is it the stock magazine that wobbles or would any magazine wobble too? Is this a good option to buy or is there a better one in the same price range?

[@jeremybenoit759]

I expect that maybe wrapping the magazine at the top with some duct tape or something could help stop any potential wobble.

[@slrchanel4233]

Could you use this at your field and should I use this or a hi cappa pistol at your feild

[@mf-doon]

I'm pretty new to airsoft and I don't know what gun to buy, would you recommend this one or something else?

[@-navi5238]

Specna arms EDGE are much much better. It’s the only gun I’d buy from specna.

[@mf-doon]

@@-navi5238 yeah, the only problem is the edge guns are ~£100-200 more expensive than flex, which makes me think this has the most bang for it's buck. i could be totally wrong though.

[@capyskat]

have you bought a gun yet? do you still need help?

[@mf-doon]

@@capyskat im currently looking at getting a Specna Arms SA-E06 EDGE 2.0, since they seem pretty solid and cheap for what you get. i dont think i need any help, thanks for the offer though!

[@capyskat]

@@mf-doon yeah, I'd either recommend that or a lancer tactical gen 3, but I guarantee you're gonna enjoy any of them!

[@cheapeatsasia]

Is it threaded? Can it take a 14mm tracer?

[@DTWAIRSOFT]

Yes it has got a 14mm ccw thread on the outer barrel

[@timothee8147]

What battery should i buy and how long should i load it?

[@DTWAIRSOFT]

Either a 7.4v lipo or a 9.6v NiMH battery will be fine in this. Charging time will depend on the charger you have for the battery

[@ajwebb8259]

What rails will go on the F01

[@ДмитрийВойцеховский-т3ь]

idk what to buy as a first gun. CM011 aka G36 rep or this gun Price the same +-

[@martynassavickas1353]

Can you plzplzplzplz make a video on how to remove the rail? Im planning on changing it to an mlok rail

[@itzyeanimations8748]

Get the specna arms flex 03 then, it's the exact same gun, but with mlok

[@itzyeanimations8748]

Get the specna arms flex 03 then, it's the exact same gun, but with mlok

[@ItsMe_y_t]

Whats the rps??

[@upforadventures98]

What type is the rail? And how do I find attachments for it?

[@DTWAIRSOFT]

They are picatinny rais, you can find attachments in for these at most sites and even some stuff on Amazon

[@wardsnertmaster1152]

what spring did you use by the chrono

[@slrchanel4233]

Yea

[@Rowc1120]

Can it run li-ion batteries?

[@DTWAIRSOFT]

Yes you can

[@Anonymous-sf8sb]

Do you need to buy the battery separately

[@DTWAIRSOFT]

Yes these don't come with a battery

[@Anonymous-sf8sb]

@@DTWAIRSOFT what battery should I buy

[@AV64422]

@@Anonymous-sf8sb a 7.4v or 9.6 nimh battery

[@Jack1Roland]

@@Anonymous-sf8sb I bought a 7.4 Lopo and the fire right is kinda sluggish but it’s fine, buy something like a 9.6 or a 11.1 Lipo battery

[@RRagnark]

11.1 will burn it and sk wil 9.6 most likely buy a 7.4v

[@stijnVDA1994]

how is the mag compatibility?

[@DTWAIRSOFT]

Nuprol, TM, ares seem to work well G&g sometimes work and Battle axe again can be hit and miss with this

[@stijnVDA1994]

@@DTWAIRSOFT do the rest don't work? Or just not in a position to test them?

[@DTWAIRSOFT]

@@stijnVDA1994 Thoes are the only ones i had on me at the time to test

[@stijnVDA1994]

@@DTWAIRSOFT i see, understandable.

[@stijnVDA1994]

Might look into this one or one from the core line🤔

[@Mx45-fx8gu]

How do you put the battery in

[@DTWAIRSOFT]

Push the two fins at the back of the butt pad for it to come off, that will givw you access to the wire to pug in the battery