Spectrum ESC throttle FIX reverse going faster than throttle FIXED!!!

So in this video you swap any 2 of the 3 wires on your sensor less brushless motor and make sure you program you esc first before swapping any 2 wires, in my case I swapped the yellow and range wire, ow you’ll see and hear the difference on getting way more speed on throttle than reverse!!!

[@bowiesenpaigaming6837]

There is a fix where you can swap the wires back. When you purchased the motor there should have been a card with a list of specs for punch brake drag etc. You can access these settings by powering on the esc and holding down the setting button. You then will hit the setting button till you access the motor direction control which for that motor it would be option 5 so you will hit setting 5 times you will know you are on the right setting when you hear 5 beeps. You then hold down setting and you will hear 1 beep which means your motor is set to ccw you can then hit the setting button again and will hear 2 beeps. Once you hear 2 beeps you hold down the setting button and you will hear a bunch more beeps after the beeping stops you can power cycle your system and the motor will be configured correctly.

[@7badtothebone]

I tried to do this on my esc. I was unable to reach the (5 button presses) step. Do I need a program card?

[@marvin86047]

Thanks for addressing the root cause, problem fixed, thank you!

[@bowiesenpaigaming6837]

@7badtothebone YES! If you are unable to find the card you can find it online

[@MichaelSchwab-nk4rm]

Thank you Sir. Just had this same exact problem and your video helped me fix it. Much appreciated 👏

[@AidanDul-un4sj]

Thank you so much for this I just installed this motor in my amp about 2 months ago and saw that it was going slower in reverse then in forward

[@aidenpn12games]

Thank you so much! Just put this motor and esc combo in my formerly brushed senton and was dumbfounded why it was going so much faster in reverse than forward. now back to bashing! 😁

[@robbomber984]

Buy the 25 dollar program card easy peasy to set punch brake drag brake etc.worth the money

[@daviddeleon7850]

I was about to throw my 💩 away and the I saw this 👌🏼 helpful

[@obshustle]

No problem brotha!!!

[@jarengray6943]

Hey would that work w the 1/24 scale same combo thing spektrum. I installed one in one it was fine this other one reversed. Thanks

[@calenirvine5711]

If you get the spectrum battery kit that’s made for the 85 amp set up it will go way faster

[@angelessapigao3805]

nice thanks works on brushed too

[@obshustle]

Your welcome!!!

[@odd6969]

THANK YOU

[@obshustle]

Your welcome!!!

[@garapia]

It's a foken BOMB !!! Thanks a Lotz LOOL ps: was looking for something else but was aware of this

[@iluvcrypto7138]

Yes it worked for me...thanks I'm happy af

[@98f5]

thanks i have this same exact issue with the same esc

[@marvin86047]

Thank you, issue resolved!

[@yusufmustafa5512]

Hi i using typhoon 3s esc 2s to 3s lipo but going to connect batter whe full throttle power cut n then finish8

[@isaac_zambrano462]

THAAAANK YOU SO MUUCHH

[@martinbullla7654]

Can you creep real slow or does it only go a certain speed when you initially hit the throttle I have a spectrum 120 amp ESC and a spectrum 3150kv brushless motor even if it is hooked to a 2400 KV Traxxas brushless motor it does the same thing I just barely tapped the gas 8 miles an hour is as slow as it will go 10 miles an hour with the other

[@jerryfowler444]

Do u leave the wires swapped?

[@obshustle]

Yes, you’ll be fine by keeping them swapped!!!

[@brave6467]

Bro big help! Thank you