Thank you so much don’t stop doing videos on the q50.
@SpeedCultureStudios Жыл бұрын
I have about 400-450 Q50 specific videos on the channel already and don’t plan on stopping!
@aficionadohiend8 ай бұрын
Hi, I just found that heating a little bit the plastic covers of the mirrors with a heatgun helps a lot to remove them without breaking any clip.
@R1KEV2 жыл бұрын
best video yet every other video i’ve seen people crack the tabs on their oem mirror caps
@SpeedCultureStudios2 жыл бұрын
They can be fragile. Just have to think about which way they clip in and try to help them move in the correct direction.
@R1KEV2 жыл бұрын
i got them off without breaking the tabs thanks to this video
@seanjackson30724 жыл бұрын
I spliced the wires and used tape. Never even thought about using the connectors. Then I used t-taps to connect to the wires for the plugs
@SpeedCultureStudios4 жыл бұрын
That’ll work
@Sunnybeast164 жыл бұрын
you see the drl stay on, I didn’t want them to stay on so there’s a way where they only turn on when you open the door more of like a welcome light pretty sure you tap it into the door light still thing that way it turns off when the car turns on, neat feature love it
@SpeedCultureStudios4 жыл бұрын
Yeah you can really tap in wherever you want. I mean you could technically tap into the brake lights and have them come in when you press the brakes.
@garagemgringa79104 жыл бұрын
@@SpeedCultureStudios I didn't get the white wire, and in case that I just want to stay on like a welcome light, I shouldn't use the blue wire, or use the blue wire in another connector that lights up with the welcome lights? Thanks, great video! by the way.
@SpeedCultureStudios4 жыл бұрын
Marcelo Silva Your colors might be totally different than mine, so think about them in terms of function rather than color. If you want the welcome light to stay on with the DRLs, you can connect that wire together with the DRL wire and tap then both into the headlights. Then drl and welcome light would be on anytime your head lights are on.
@zaibashrafi86824 жыл бұрын
THOSE ARE AWESOME!!!!!
@SpeedCultureStudios4 жыл бұрын
Thanks!
@itsreallyghost48602 жыл бұрын
So basically remove the mirror first then do everything else if you want the daylight running led
@thaiblkman14 жыл бұрын
I ordered mine from Amazon too , and you were right they had 2 left a the time..they come in Monday
@thejamaicansenpai16984 жыл бұрын
Mine are a bit different. I got mine from Ebay, and I didn't get that useless wire.
@thaiblkman14 жыл бұрын
Thanks for ur video it helped out alot..put them in this morning..there GREAT
@Hondacbr600rrish4 жыл бұрын
First like!!! Lol. Love those mirror caps and saving up on the the steering wheel for the g37s 🤙🏽
@Hondacbr600rrish4 жыл бұрын
Oh! Those lights are killer as well.
@SpeedCultureStudios4 жыл бұрын
Thanks!!
@thaiblkman14 жыл бұрын
You'll love the feel of that wheel too
@robertgreen80464 жыл бұрын
We're about to do a group buy with at least 10 other Infiniti owners, the manufacturer said we would save 20% due to the group buy. Let me know if you want to go in on the group buy with us.
@Hondacbr600rrish4 жыл бұрын
Definitely interested.
@jittspatel3 жыл бұрын
Knocking mine off tomm, thank you for this🙌🏾
@SpeedCultureStudios3 жыл бұрын
Good deal! Take your time!
@DG-88811 ай бұрын
The black wire that u connected to the grey wire inside door(ground). Cant u just ground it to a bolt?
@SpeedCultureStudios11 ай бұрын
Yes
@hisdr68463 жыл бұрын
I plugged everything how you showed it in the video and at the end I tried plugging in the pins into the factory wires but the drls didn’t turn on any advice?
@SpeedCultureStudios3 жыл бұрын
Check to make sure the wires you pinned to see the correct ones
@eternal33663 жыл бұрын
Thanks for the video bro!! Just install mine!!
@SpeedCultureStudios3 жыл бұрын
You can handle it!!
@douglasa26424 ай бұрын
when you connected the DRL’s from the turn signal lights to come on when the headlights are on, is that only when the headlights ( low beams) are on or when the daytime running lights from the headlights are on?
@eternal33663 жыл бұрын
Thanks for the video bro. Will be installing mine tomorrow Saturday June 12th 2021
@russelwestbrook29223 жыл бұрын
How’d it go?
@russelwestbrook29223 жыл бұрын
I purchased these & really excited on installing them, any tips
@eternal33663 жыл бұрын
@@russelwestbrook2922 it went really well bro. Thanks again
@lilkev50302 жыл бұрын
I installed just the red and black wire for just the turn signal to work. And when i test it out. The light bar does not go all the way through. As in in only blinks up to 4th light bar and then it stops, Any idea why its not functioning right? For 2019 q50 i also bought the front light sequentials and it also does the same thing. So im wondering do i have to install the drl wires as well for it to work properly?
@SpeedCultureStudios2 жыл бұрын
If installed properly, I am not sure why it wouldn't blink all the way through. Did you contact the seller?
@corym9063 Жыл бұрын
hey man love your videos and content, getting the SCS exhaust soon. Just curious, would u say the jaliscos are worth the price? debating getting the amazon ones
@SpeedCultureStudios Жыл бұрын
They are good quality and have pretty good service so there is value in that.
@Awsometiger10113 жыл бұрын
can i use t taps on these
@joseg59133 жыл бұрын
Installed my mirror caps today, the bottom clips broke off on both my old mirror caps but I didn’t need them Anyway. But I kinda had a hard time prying them open and scratched up the actually mirror housing, a little bummed out but it’s not the worst
@SpeedCultureStudios3 жыл бұрын
It’s not super easy
@kingjoe60042 жыл бұрын
I broke one clip of my old cap. But I couldn’t install them didn’t have the patience 😂 so installed the old ones back on
@duskmike85263 жыл бұрын
I just bought these and needed an install video
@SpeedCultureStudios3 жыл бұрын
Nice!
@jersonmancebo7453 Жыл бұрын
Hey I just installed them but I getting hyper flash ima buy the resistors but I don’t know what cable I need to connect them too. Do I need to connect the resistors to the red and black cable that goes for the turn signal ?
@SpeedCultureStudios Жыл бұрын
The resistors go in between the wires you have connected now.
@Turbo.s44 жыл бұрын
Ordered the same mirror caps a few days ago. Looks good bro!
@SpeedCultureStudios4 жыл бұрын
You’ll be happy!
@Ballerchase5054 жыл бұрын
How can I order these mirror caps? Link please and thank you.
@SpeedCultureStudios4 жыл бұрын
Chris Clark have to go to @jaliscos_carbonfiber on IG
@imbeasting19803 жыл бұрын
couldn’t you have put the wires into one side of the harness then just strip the other side? thank you for the video though! installing along the video 🤟
@SpeedCultureStudios3 жыл бұрын
I’m not sure I follow what you’re asking, but yeah I mean you can do anything that works for you as long as you make good connections. This is certainly not the only way.
@adrianstypulkowski64853 жыл бұрын
Question? @Speed Culture Studios what is that white wire? the puddle lamp?? where does it connect?
@SpeedCultureStudios3 жыл бұрын
It connects to a wire inside the door
@xaviercruz5250 Жыл бұрын
I wired mine like this but the wires inside the mirror cap for the turn signal were white & black. The red & black wires power the puddle lamps but they’re the same length as the ones for the turn signal if that make sense.. so my question is does yours have puddles lamps & where would those go into?
@SpeedCultureStudios Жыл бұрын
I did not wire the puddle lamps.
@acarrs10517 ай бұрын
Did you end up using the white and black wire for the turn signal or how did you go about this?
@anthonytorres50622 жыл бұрын
I have these same lights had them installed by a autobody shop the turn signals work but they aren’t on all the time when it’s dark how can I change that
@SpeedCultureStudios2 жыл бұрын
They can be wired into the daytime running lights to be on all the time.
@josephtran5316 Жыл бұрын
I have the same turn signals but I lost the extended wire for the DRL's is there any other wire or something else I can use?
@SpeedCultureStudios Жыл бұрын
You can just use some additional wire if the same gauge
@inthelifeofleif82682 жыл бұрын
Have you had issues with the remote not locking the front doors since this install? I realized shortly after I did mine that the remote doesn’t lock front doors now.
@SpeedCultureStudios2 жыл бұрын
No issues with the lock
@DanielGonzalez-ls5dj Жыл бұрын
Hey quick question my DRL are staying on when I lock the car got any idea what could be the issue
@SpeedCultureStudios Жыл бұрын
Do you have your lights on? I know dumb question, but worth a look. Make sure they're off or in auto. Only thing I can think of really.
@Itsmixsta3 жыл бұрын
How do you know which wires to tap into? Which wires did you tap into? Does the drls come in with the headlights or are they on with the regular drls that comes on the car?
@SpeedCultureStudios3 жыл бұрын
I tested the wires with a test light. I showed in the video which wires to tap. Drls come on with headlights. I talk about all of this in the video
@Luc_4pf11 ай бұрын
Would this be the same with the RGB sequentials? Or would there be any different steps.
@SpeedCultureStudios11 ай бұрын
Same
@Jose.r473 жыл бұрын
So I’m planning on installing these tomorrow but I only want the turn signal sequential and don’t care about the puddle light or DTRL… those cables are attached already to the lights… what would you recommend me to do? I plan on trading my Q50 in about a year for a q60 so I’ll end up taking these lights off and installing them on the Q60… what do you recommend me to do with the extra wires?
@SpeedCultureStudios3 жыл бұрын
Just leave them or tape them up so they don't vibrate off anything.
@alexreinhard69253 жыл бұрын
Can you install the after market Mirrors and still keep the stock turn signals? Or do you need aftermarket turn signals as well?
@SpeedCultureStudios3 жыл бұрын
You can keep factory signals!
@Joshuaaaa.7 ай бұрын
Quick question, this might sound dumb but do you have to do the whole wiring process on the other side also? Or can you just plug it in like how you showed at the start and the drls will work by themselves because it’s connected to the Daytime running lights already.
@SpeedCultureStudios7 ай бұрын
Each mirror has to be wired to power.
@mikewilmer63013 жыл бұрын
Hey man, this is off topic of this vid but i've seen most of yours over the years, and a big fan. In regards to the front bumper drl and turn signals... I installed mine, but when I connect to power the signals hyperflash (this being outside the window movement) and i did not get from JR lights, but from SmartAuto. I've tried tapping various wires (currently same as yours to the front emblem, which connects to always on module, pink wire for headlights. And load resistors - just a pain. I am trying to take an easier way out and replace the OEM turn signal relay with a LED signal relay. My problem is, there is no video I can find or resource that easily identifies where our 3.7 signal relay is located. I contacted the vendor and they ensured me it's under the steering column, which I cannot find. I'm trying to locate so I can unplug and identify the correct pin allocation for the led relay. Do you know where this is? Much frustration would be relieved if you could help me out - much appreciated!
@SpeedCultureStudios3 жыл бұрын
You’ll just need resistors. Tap into the same wires that you are current getting with the hyper flash but put the resistor between inline between the light and the power supply wire. Maybe shoot jr lights and see if he can get you a couple of them. He usually includes them with the signals so I’m guessing he has some on hand
@mikewilmer63013 жыл бұрын
@@SpeedCultureStudios Thanks, I have the resistors and have tried tapping it into the power line and ground. Maybe I need to do actually use both. If this continues to not work, do you know where I can locate the flasher relay?
@SpeedCultureStudios3 жыл бұрын
@@mikewilmer6301 no I don’t. You could reach out to jr lights on iG. He may have something
@mikewilmer63013 жыл бұрын
@@SpeedCultureStudios alright thanks - appreciate the responses!
@frankrodriguez85204 жыл бұрын
Nice video but I need to know how to put the white light on.
@SpeedCultureStudios4 жыл бұрын
You can connect it with the DRL wire and it’ll be on all the time or you can take the panel off inside the door and tap into the proper wire
@frankrodriguez85204 жыл бұрын
Speed Culture Studios thank you👍🏻
@chad_slatch Жыл бұрын
Thanks for this video! In the sunlight how closely do you feel the mirror color matches the color of the car? I assume they are just a generic gloss black from the manufacturer?
@SpeedCultureStudios Жыл бұрын
That's correct--just generic black. They match quite well because the car is just obsidian black--not the malbec with the speckles--and they are separated enough from the car itself so the eye doesn't get a real side by side comparison to notice a difference.
@chad_slatch Жыл бұрын
@@SpeedCultureStudios Thanks I appreciate it!
@Okiee12344 жыл бұрын
Just made my order for the mirror caps! Quick response, although they’re not in stock yet. Do you have the link for the turn signals?
@SpeedCultureStudios4 жыл бұрын
Link in video now! Thanks for watching!
@BehindMyVisor3 жыл бұрын
fishing these wires through has not been easy lol
@SpeedCultureStudios3 жыл бұрын
Yeah it’s not super easy
@Jimmy-gz8oeАй бұрын
would using posi taps be better ?
@SpeedCultureStudiosАй бұрын
I don’t know about better but you can use whatever is going to give you a good connection
@andresgutierrez35622 жыл бұрын
Why u didn't use the white wire? What function will it do?
@SpeedCultureStudios2 жыл бұрын
I think I mentioned it in the video. It’s for the puddle wires which I did not want
@MikeyBLive Жыл бұрын
It seems they changed alil since this video. I was watching yours and following along but my wires for the turn signals only are white and black instead of red and black. Ordered from Jalisco as well. I hooked those in and nothing turned on. Contacted him seeing what’s up. Hooking up the rest for the daytime running tmr. The wire colors are different now though.
@bernyhilario1292 Жыл бұрын
I having the same issue as you, I just contacted them but have they told you anything? I could use the help.
@MikeyBLive Жыл бұрын
@@bernyhilario1292 my car is at my buddies and he’s gonna pick me up in a bit. Jalisco doesn’t answer Instagram dm so I gotta email him the pictures
@bernyhilario1292 Жыл бұрын
@@MikeyBLive if you get them to work somehow can you let me know so I can do the same thanks
@MikeyBLive Жыл бұрын
@@bernyhilario1292 I tried and it did not work. I am in contact with Jalisco waiting for a reply. Don’t waste your time though cause I tried hooking up the day time wiring as well and got nothing.
@isaiahdominguez906 Жыл бұрын
Mine have the same issue
@____aris4 жыл бұрын
ty for this! almost paid a man to do this lmaoooo
@SpeedCultureStudios4 жыл бұрын
Glad it was helpful!
@2jzcarlos7262 жыл бұрын
Hey bro I bought some sequential locally and they have an extra red and black wire I’m having trouble getting the daytime running lights turning on
@jdeltoro_4 жыл бұрын
Nice bro 👌 buying those for sure
@SpeedCultureStudios4 жыл бұрын
You’ll like them!
@Jimmy-gz8oe8 ай бұрын
where did you get the sequential from and are those clear or smoked ?
@SpeedCultureStudios8 ай бұрын
Check the description for link to the sequentials. These are clear
@Eduar-sv5vf3 жыл бұрын
Hey do you know where I could get that extension cable ? Or what can I do if I don’t have the extension cable ?
@SpeedCultureStudios3 жыл бұрын
You can just make one. Go to an auto parts store and get some wire of the same gauge
@q50_rob774 жыл бұрын
Sick bro look nice 🔥🔥🔥 I need some for mines ASAP! Very helpful bro👍🏼🙏🏻💪🏼
@SpeedCultureStudios4 жыл бұрын
Thanks for watching man!
@ryangrover8600 Жыл бұрын
bro this is so confusing, ordered mine off southbay auto works and theres wire with like actual connectors and all different colors from yours
@SpeedCultureStudios Жыл бұрын
Hopefully they gave you a chart for what each color means.
@ryangrover8600 Жыл бұрын
they didn’t lol, i have a black and white wire the has a yellow hazard sticker on it saying don’t connect to power supply those are my turn signals ig, and then i have a separate red and black then a separate brown blue and black
@acarrs1051 Жыл бұрын
I have the exact same ones from Southbay Autoworkz and have no clue how to wire it. Did you end up figuring out how?
@Qfifty4 жыл бұрын
Does anyone know where to put the white wire into so it comes on when you have hit the unlock button only ? Thanks
@SpeedCultureStudios4 жыл бұрын
I believe brown white behind panel of the door.
@tristanoliver29114 жыл бұрын
Look beautiful, sadly i was working when you had your live hope I didn’t miss any giveaway opportunities
@SpeedCultureStudios4 жыл бұрын
You did sorry! But there will be more! Very successful Live, so we are going to make it a regular thing!
@reggiebowens8952 жыл бұрын
Installed mine recently and trying to figure out the best method to get rid of hyper flash for a 2019 q50 any suggestions?
@SpeedCultureStudios2 жыл бұрын
Yes there is a little resistor that can be placed inline between the light and the power source and that will eliminate the the hyper flash. Check in with @jr_lights on IG. He may have some to sell individually.
@reggiebowens8952 жыл бұрын
@@SpeedCultureStudios thanks so much I will check him out.
@ccutzz59734 жыл бұрын
Does the 2015 q50 come with blind spot monitoring? If not is there a way to install them?
@SpeedCultureStudios4 жыл бұрын
Mine did not-I can’t say for certain whether or not other trim levels did. For the right amount of money anything can be done, but there are sensors and wiring involved, so I would imagine it’s quite complex to set that up in a vehicle that was not originally equipped
@kadeemrobin3 жыл бұрын
I have the 2015 premium package and it comes with blind spot intervention and blind spot warning. I think it uses the cameras on the mirrors.
@Ben7342 жыл бұрын
Hey does anyone know about the legality of having these DRL's on all the time at night? Especially in the streets of CA? Could they be considered side markers?
@SpeedCultureStudios2 жыл бұрын
It's a good question considering how strict some of California's rules are.
@Andrew-vd1fd3 жыл бұрын
What was the white wire for ? Since you didn’t connect it and just taped it up ?
@Andrew-vd1fd3 жыл бұрын
Are your puddle light working as well?
@SpeedCultureStudios3 жыл бұрын
White wire is for the puddle light. I did not want them on.
@Andrew-vd1fd3 жыл бұрын
@@SpeedCultureStudios oh cool, that’s what I was thinking, thanks for the quick reply 👍🏼. Nice vid
@genarorenteria36273 жыл бұрын
I’m seeing that the q50 and the q70 are slights different. Question I have is did you have to modify the light in any way for fitment issues?
@SpeedCultureStudios3 жыл бұрын
There are differences between the 50 and 70. No modification necessary.
@genarorenteria36273 жыл бұрын
@@SpeedCultureStudios I just tried to install them on my car and the fitment was horrible. I had to grind down the back of the light and it still did not fit right. Trying to get my money back as we speak.
@genarorenteria36273 жыл бұрын
@@SpeedCultureStudios by the way these are not the lights off Amazon. Just to be clear these are off eBay which I’m sure they are all the same. Lol
@SpeedCultureStudios3 жыл бұрын
@@genarorenteria3627 what do you mean “these.” Are you saying you have some from eBay? Mine were from amazon, but yes they probably come from the same place.
@genarorenteria36273 жыл бұрын
@@SpeedCultureStudios yea the ones I have are off eBay. They look exactly the same as yours. Same color wire and all. But fitment was not good.
@nickkk50513 жыл бұрын
Did u get ur turn signal sequentially from jrlights on ig ?
@SpeedCultureStudios3 жыл бұрын
No. Linked in the description. Amazon
@skyforgedgaming2 жыл бұрын
Do the black and green wires not go to anything?
@Gofast89545 ай бұрын
So if I just want the sequential lights and the carbon fiber mirror caps I don’t have to do the extra crap right ?
@SpeedCultureStudios5 ай бұрын
Extra crap?
@Gofast89545 ай бұрын
@@SpeedCultureStudios 😂 yeah like , I’m not good with wiring so I meant like the stuff on the inside of the door
@SpeedCultureStudios5 ай бұрын
@@Gofast8954 there was no extra crap 😂 It’s all part of installing the sequentials. Just no puddle light
@JoseRodriguez-nu3cu2 жыл бұрын
What springs do you run? The ride height is perfect
@SpeedCultureStudios2 жыл бұрын
Thanks! I actually have bc Coilovers but Tein s tech lowering springs gave me about this exact height
@JoseRodriguez-nu3cu2 жыл бұрын
@@SpeedCultureStudios sweet! Thanks bro, hope all is well!
@GTiRSmiley4 жыл бұрын
Thanks for the video. I might have missed it but do the puddle lights work with the way you wired it?
@SpeedCultureStudios4 жыл бұрын
No, I did not connect the white white which is the puddle lights. The car already has a puddle light under the handle and the Infiniti logos under the doors so another light wasn’t necessary to me. You can tie it in with the DRLs if you want them on all the time, you can tap them into the same wire that powers the puddle lights for the handle.
@GTiRSmiley4 жыл бұрын
@@SpeedCultureStudios Awesome. Do you know if that wire is going to be in that same harness you tapped in to? Or am I going to have to look for another power source?
@SpeedCultureStudios4 жыл бұрын
GTiRSmiley my feeling is that it has to be in there, but most I’ve seen tap into a different location behind that plate. I’d have to find a diagram or just get the test light out and check for power only when the unlock button is hit or something.
@Qfifty4 жыл бұрын
Speed Culture Studios so could I leave the blue and white wire tapped into how you have it and have the white wire (the puddle light) to the brown wire behind the metal plate on the door?
@SpeedCultureStudios4 жыл бұрын
Qfifty 2014 yes-I cant remember the color of the wire you need to tap into behind the plate, but yes, that should get you the puddle light that comes on when you approach/unlock the car
@Pray.to.0g3 жыл бұрын
Where did you get the mirro lights from ?
@SpeedCultureStudios3 жыл бұрын
Linked in the description man! Amazon
@sasquatchnunu5062 жыл бұрын
Wonder how many fires that have been started due to this video! Lol
@SpeedCultureStudios2 жыл бұрын
0 and I’m not sure why any fires would be started.
Save yourself some time and don't purchase through Jalisco.
@vhrnick2614 жыл бұрын
Robert Green lol who should i buy from? The thief VQcarboncustoms? Im good sir, jaliscos the best around
@SpeedCultureStudios4 жыл бұрын
VHR Nick You got that right buddy!
@nicodjulianto17334 жыл бұрын
Are you going to do the rear bumper reflector next 😏?
@SpeedCultureStudios4 жыл бұрын
I’ve wanted to for awhile, but reviews of them are horrible with bad fitment issues. I thought about getting them anyway to see if I can come up with a solution. Stay tuned
@nicodjulianto17334 жыл бұрын
Speed Culture Studios I just got one off eBay and going to test my luck! Haha.
@joshbeerer78423 жыл бұрын
couldn’t you tap the dlr lights into the red and black stripe wire that you connected the turn signal light into? rather than taking the door card off and running it into the cab?
@joshbeerer78423 жыл бұрын
wait nvm, that would only turn on when the turn signal is activated lol
@SpeedCultureStudios3 жыл бұрын
Lol that’s correct
@bstr8upballa3 жыл бұрын
Where do you get the the purple and orange tools you used to get the cap off in the beginning of the video?
@SpeedCultureStudios3 жыл бұрын
Amazon. I think they are linked in the description
@bstr8upballa3 жыл бұрын
@@SpeedCultureStudios as some who is just beginning DIY anything lol ... what do you recommend is a good ratchet set or other tools to start with in the garage ?
@SpeedCultureStudios3 жыл бұрын
@@bstr8upballa it really depends on your budget, but my parents got me a 150pc ratchet and wrench set for Christmas my first year living on my own and I’ve had that set with me for over 15 years now. It’s a great set to get you started and inexpensive. Check out my amazon store-I have a tool/garage section that lists some good stuff!!
@bstr8upballa3 жыл бұрын
@@SpeedCultureStudios Im in the harbor Freight price range haha!! I’d rather have what I need then try a project and have to keep running out for tools ...
@SpeedCultureStudios3 жыл бұрын
@@bstr8upballa There is plenty of stuff at harbor freight to get you started! If you’re working on a Q50, make sure you have a solid metric set
@seanjackson30724 жыл бұрын
The smoked ones woulda looked better on the all black car. Still dope tho.
@SpeedCultureStudios4 жыл бұрын
I had contemplated it, but that’s be too much black. I like the white contrast in the leds
@seanjackson30724 жыл бұрын
Yeah it’s nice. But super bright at night.
@SpeedCultureStudios4 жыл бұрын
sean jackson haven’t driven yet with them at night. I’ll have to check it out and see. I can always change them!
@seanjackson30724 жыл бұрын
Ok cool
@ericmoreno10842 ай бұрын
How are the sequentials holdin up?
@SpeedCultureStudios2 ай бұрын
They did just fine!
@ericmoreno10842 ай бұрын
@@SpeedCultureStudios i just bought a pair, been watching since the beginning of your build. Finally got my q50 this year excited to get the build started! Getting your exhaust soon hopefully
@SpeedCultureStudios2 ай бұрын
@@ericmoreno1084 awesome man. You’ll enjoy it!!
@ericmoreno10842 ай бұрын
@@SpeedCultureStudioshey man can i dm you with some questions?
@buckzatm7394 жыл бұрын
Question does the door panel have to be connected for the drl’s to turn on
@SpeedCultureStudios4 жыл бұрын
No-you mean for testing purposes?
@ggee.vr30772 жыл бұрын
how long did it take to do it all bro?
@SpeedCultureStudios2 жыл бұрын
Just a couple hours man
@miguel-vx8ew7 ай бұрын
hey man i installed my sequintials and they were working just fine for 15 min then stopped working n suddenly my window won’t roll automatically up it will roll in segments , going crazy right now hoping for a fast reply 😂
@qfiddy61227 ай бұрын
Same thing just happened to me😭 lmk if you figured it out
@MannyQ505 ай бұрын
@@qfiddy6122same here lmao
@stevenmach76282 жыл бұрын
Did they turn yellow overtime?
@stevenmach76282 жыл бұрын
The sequential
@SpeedCultureStudios2 жыл бұрын
Have not turned yellow yet.
@RICKSHVACLLC3 жыл бұрын
Need ur help, I got mr driver side connected I did it for it to be on all the time. 16q50s I have black blue and white wires, for some reason i don’t have power at my purple wire the same wire you tapped into for power I found power at the connector for the side mirror but not getting drl only getting turn signal
@SpeedCultureStudios3 жыл бұрын
Do you have your headlights turned on?
@RICKSHVACLLC3 жыл бұрын
Headlights on, checked all the wires at the connector that you tapped in got no power
@Awsometiger10113 жыл бұрын
So that white wire was your puddle light? If it is where do I connect that wire to have it with my DRL?
@SpeedCultureStudios3 жыл бұрын
If you want it all the time, you can just connect it to the wire with the drl wire
@Awsometiger10113 жыл бұрын
@@SpeedCultureStudios Ok what if ai just want it as a welcome light. Do you know where I connect that?
@SpeedCultureStudios3 жыл бұрын
@@Awsometiger1011 you have to remove the small plate on the inner portion of the door to access the wire that operates the small lights under the door handles. I can't remember what the color of the wire is off the top of my head.
@Awsometiger10113 жыл бұрын
@@SpeedCultureStudios ohhh ok thank you!! So does the puddle light just lighten up the floor ? What does it do really
@SpeedCultureStudios3 жыл бұрын
@@Awsometiger1011 yes shines directly down. I feel like it is a bit redundant because the door handle already has a flood light.
@Itsmixsta3 жыл бұрын
What is the white wire for?
@SpeedCultureStudios3 жыл бұрын
Puddle lights. Didn’t want them
@H60DRiCH3 жыл бұрын
🔥🔥🔥🔥 dope asf
@SpeedCultureStudios3 жыл бұрын
Thanks for checking it out!
@junique4641 Жыл бұрын
Fire 🔥
@SpeedCultureStudios Жыл бұрын
Thanks!
@Awsometiger10113 жыл бұрын
What’s that red thing you use to connect them? Are they heat shrink?
@SpeedCultureStudios3 жыл бұрын
No they are just simple wire connectors. Crimp on style
@Awsometiger10113 жыл бұрын
@@SpeedCultureStudios Ohhh ok. Do you know if I can use heat shrink to connect those. That’s all I got
@Awsometiger10113 жыл бұрын
^ 🥺
@angelsawg103 жыл бұрын
@@Awsometiger1011 heat shrink could be used over the connectors dont just simply use heat shrrink
@Awsometiger10113 жыл бұрын
@@angelsawg10 what do u mean
@EmpraMcdade3 жыл бұрын
Can't go wrong with a bmw type look lol.
@SpeedCultureStudios3 жыл бұрын
Lol right. Especially m style!
@Endrry173 жыл бұрын
Whats the wheel set-up? 😊
@wrxsubaru02 Жыл бұрын
Are there any out there that have auto dim feature? I cant seem to find any for G37 or Q50
@SpeedCultureStudios Жыл бұрын
I'm not familiar with an auto dim feature.
@christianarmenta94912 жыл бұрын
Why did mine come with an extra green and black cable?
@SpeedCultureStudios2 жыл бұрын
There are wires to connect to the turn signals then wires to connect to the puddle lights
@bobbybines78814 жыл бұрын
its little details such as this i swear!
@dannyalligier29182 жыл бұрын
Has anyone had any issues with these turn signals? Or the way it’s wired? I installed them identical to how he did it in the video and I noticed my battery dies after sitting for a week. Cars only 3 years old with original battery still in the car. Got the battery tested and was at 54% health and starter and alternator is fine too.
@SpeedCultureStudios2 жыл бұрын
You have a draw somewhere
@dannyalligier29182 жыл бұрын
@@SpeedCultureStudios how can that be corrected though? I did it the same way you did
@Qfifty4 жыл бұрын
Random question I followed the steps but when I put them in my sequential stop working but drl worked....any ideas why ?
@SpeedCultureStudios4 жыл бұрын
Connection for the sequentials is loose.
@Qfifty4 жыл бұрын
Speed Culture Studios I thought that I check that but it was fine one thing tho my battery is low where it won’t start car allows me to put it in accessory mode
@SpeedCultureStudios4 жыл бұрын
Qfifty 2014 Sounds like it’s time for a new battery. Just had to replace mine a couple months ago too
@Qfifty4 жыл бұрын
Speed Culture Studios so you think it’s cuz of battery than? And thanks for the replies man
@SpeedCultureStudios4 жыл бұрын
Qfifty 2014 I can’t say for certain but sounds like battery
@osobaked13913 жыл бұрын
How’s the fitment on the mirror caps? Been thinking about ordering the carbon fiber m style caps from him
@SpeedCultureStudios3 жыл бұрын
They fit great!
@thejamaicansenpai16984 жыл бұрын
I added the turn signals about 4 months ago. There is a okay DIY video for the turn siangels but its crap when you wanna hook up the puddle light. I'm still trying to figure it out lol. My next step is the bumper turn signal to make the DRL's and sequential like the ones on my mirror.
@SpeedCultureStudios4 жыл бұрын
My video got so long I was going to have a section on where to connect the puddle light.
@thejamaicansenpai16984 жыл бұрын
You should. I'm getting tired of trying to figure it out. It's slowly getting on my nerves. Makes it like like a unfinished project or half assed project.
@Collectingwithrandd4 жыл бұрын
Speed Culture Studios definitely second his comment, installin mine tomorrow an i wanna hook up the puddle light also
@SpeedCultureStudios4 жыл бұрын
B Rand you can tie the puddle light wire to the drl wire and it will always be on.
@Collectingwithrandd4 жыл бұрын
Speed Culture Studios gotcha so the puddle light an the white led strip on the signal will be on all the time right?
@Trblgang7 ай бұрын
Would those mirrors work on a 2011 G37S ?
@SpeedCultureStudios7 ай бұрын
No
@Trblgang7 ай бұрын
@@SpeedCultureStudios Thx Bro
@fukariliang3 жыл бұрын
can you please link to your rims, i want to buy the same ones
@SpeedCultureStudios3 жыл бұрын
I don’t have a link to them specifically because they are basically made to order if they don’t have a set on hand but you can reach out to Motorsports LA and let them know I sent you!
@kobea8199 Жыл бұрын
How do you get puddle light
@kobea8199 Жыл бұрын
I have the same wires as you did the exactly same thing left white wire out an I have no puddle
@SpeedCultureStudios Жыл бұрын
I did not wire in the puddle lights. I didn't want them. I don't recall which wire in the harness is for the puddle lights, but you can trace it and connect it if you'd like it.
@kobea8199 Жыл бұрын
@@SpeedCultureStudios oh lol 😂
@louisferaca92904 жыл бұрын
First son...
@SpeedCultureStudios4 жыл бұрын
Always! 👍
@BRYAN-uh7ge2 жыл бұрын
Can they be connected to the fog lights instead of the headlights?
@SpeedCultureStudios2 жыл бұрын
I’m not sure what you mean, but you can connect them to whatever power source you can reach.
@BRYAN-uh7ge2 жыл бұрын
@@SpeedCultureStudios perfect 👌 When you connect them to the headlights will they stay turned on all the time when using the car ? Or only when headlights turn on automatically during night
@SpeedCultureStudios2 жыл бұрын
@@BRYAN-uh7ge Where are you accessing the headlight wire from the mirror? But if you truly are connecting to the headlights, they will turn on when the head lights turn on. If you connect to the DRL, they will be on with the DRL.