🐝Speedybee Mario 5/ rcinpower major wasp/ air unit O3/ no jello/ sin hélices

[@koka2551]

gracias amigoooo

[@lucasleite6022]

saludos desde brasil. Muy bueno. Gracias

[@DronesYjuguetes]

@@lucasleite6022 obrigado‼️

[@mellamanbody]

Ereh Un crack, me encanta como vas contando el montaje... Sigue así, que ayudas muchisimo!!!

[@borjinhaescobar2150]

Hola, solo quiero dejarte un dato y es que acabo de montarme un mario 5 con la speedeby f7 y al montarlo a tocado uno de los brazos del condensador la tierca de hierro que esta debajo del frame y se me a quemado, ten micho cuidado con ese frame

[@bardfpv]

Great flight ;)

[@ポテト0907]

Cabling this quad seems very tricky and challenging. Did you manage to get the capacitor installed in the bottom plate ?

[@DronesYjuguetes]

@@ポテト0907 Yes, perfectly, but when editing the video I deleted this part without realizing it. Min 12:07

[@husseinalsweid5062]

H; wich screws did you use for the Motors? i mean the M3 but how long are they?

[@1978jvm]

Te ha quedado muy fino, aún estoy esperando que baje algo la 03, la jodía no baja de precio ni de coña, al final tendré que claudicar y pagar los 200 pavacos😢, me encanta tu canal 😊

[@JoseGuadalupeIbarraEscobar]

No es necesario un receptor ELRS si tiengo las gafas y la cámara DJI en el dron para controlarlo?

[@DronesYjuguetes]

@@JoseGuadalupeIbarraEscobar te haría falta el remote control de dji

[@JoseGuadalupeIbarraEscobar]

@@DronesYjuguetes tengo control DJI pero como funciona sin un receptor ELRS? Si no tuviera el control podria utilizar otro un radiomaster por ejemplo con las gafas y la camara dji?

[@josemavazquez]

Hola te ha quedado guapísimo yo voy a empezar a montarlo ya con ganas de que me lleguen las piezas, una pregunta he comprado los mismos motores que has montado tu que helices has montado y donde las compraste? un saludo

[@betaodrone]

hello friend do you have propeller link

[@AeroGeekWorld]

que antenas recomiendas para las gafas dji v2

[@DronesYjuguetes]

Yo tenia las truerc x2-air

Que tal va con el viento fuerte en el mario 5 pro

[@DronesYjuguetes]

Lo volé poco ya no lo tengo, le puse unos motores potentes los rcinpower jasp major

[@josemariaeliasdelgado9446]

Hola, te ha quedado espectacular, me estoy iniciando en el tema de montaje de drones fpv, podrías decir o poner el enlace de donde compraste el tema de emisora, y el transmisor de vídeo, perdona pero no entiendo mucho del tema. Gracias.

[@DronesYjuguetes]

Si quieres por aquí te podríamos ayudar t.me/ELRSfpv

[@josemariaeliasdelgado9446]

Hola , muchas gracias por tu parte y por responder tan rápido. Muy amable. Si no es indiscreción por cuanto le salió el dron que montas en el vídeo, de nuevo muchas gracias.

[@DronesYjuguetes]

@@josemariaeliasdelgado9446 35€ frame 83€ F7 V3 BL32 50A 100€ motores wasp major rcinpower 250€ air unit o3

[@thaikerfpv]

Nice one 👍 great quality from this O3 , goggles 2?

[@DronesYjuguetes]

Yes, G2

[@damaca_fpv]

hola! Que buen video. Podrías compartir tu pid tuning?

[@DronesYjuguetes]

Le puse lo mismo que máster 5 # dump # version # Betaflight / STM32F7X2 (S7X2) 4.4.0 Apr 11 2023 / 05:25:16 (4605309d8) MSP API: 1.45 profile 1 # profile 1 set profile_name = - set dterm_lpf1_dyn_min_hz = 67 set dterm_lpf1_dyn_max_hz = 135 set dterm_lpf1_dyn_expo = 5 set dterm_lpf1_type = PT1 set dterm_lpf1_static_hz = 67 set dterm_lpf2_type = BIQUAD set dterm_lpf2_static_hz = 135 set dterm_notch_hz = 0 set dterm_notch_cutoff = 0 set vbat_sag_compensation = 0 set pid_at_min_throttle = ON set anti_gravity_gain = 80 set anti_gravity_cutoff_hz = 5 set anti_gravity_p_gain = 100 set acc_limit_yaw = 0 set acc_limit = 0 set crash_dthreshold = 50 set crash_gthreshold = 400 set crash_setpoint_threshold = 350 set crash_time = 500 set crash_delay = 0 set crash_recovery_angle = 10 set crash_recovery_rate = 100 set crash_limit_yaw = 200 set crash_recovery = OFF set iterm_rotation = OFF set iterm_relax = RP set iterm_relax_type = SETPOINT set iterm_relax_cutoff = 15 set iterm_windup = 85 set iterm_limit = 400 set pidsum_limit = 1000 set pidsum_limit_yaw = 1000 set yaw_lowpass_hz = 100 set throttle_boost = 5 set throttle_boost_cutoff = 15 set p_pitch = 39 set i_pitch = 97 set d_pitch = 43 set f_pitch = 129 set p_roll = 34 set i_roll = 79 set d_roll = 32 set f_roll = 124 set p_yaw = 32 set i_yaw = 88 set d_yaw = 0 set f_yaw = 100 set angle_level_strength = 100 set horizon_level_strength = 50 set horizon_transition = 75 set level_limit = 55 set horizon_tilt_effect = 75 set horizon_tilt_expert_mode = OFF set abs_control_gain = 0 set abs_control_limit = 90 set abs_control_error_limit = 20 set abs_control_cutoff = 11 set use_integrated_yaw = OFF set integrated_yaw_relax = 200 set d_min_roll = 29 set d_min_pitch = 40 set d_min_yaw = 0 set d_max_gain = 37 set d_max_advance = 20 set motor_output_limit = 100 set auto_profile_cell_count = 0 set launch_control_mode = NORMAL set launch_trigger_allow_reset = ON set launch_trigger_throttle_percent = 20 set launch_angle_limit = 0 set launch_control_gain = 40 set thrust_linear = 25 set transient_throttle_limit = 0 set feedforward_transition = 0 set feedforward_averaging = OFF set feedforward_smooth_factor = 65 set feedforward_jitter_factor = 12 set feedforward_boost = 15 set feedforward_max_rate_limit = 90 set dyn_idle_min_rpm = 0 set dyn_idle_p_gain = 50 set dyn_idle_i_gain = 50 set dyn_idle_d_gain = 50 set dyn_idle_max_increase = 150 set level_race_mode = OFF set simplified_pids_mode = OFF set simplified_master_multiplier = 90 set simplified_i_gain = 130 set simplified_d_gain = 100 set simplified_pi_gain = 85 set simplified_dmax_gain = 50 set simplified_feedforward_gain = 120 set simplified_pitch_d_gain = 120 set simplified_pitch_pi_gain = 105 set simplified_dterm_filter = ON set simplified_dterm_filter_multiplier = 90 set tpa_mode = PD set tpa_rate = 35 set tpa_breakpoint = 1200 rateprofile 0 # rateprofile 0 set rateprofile_name = - set thr_mid = 25 set thr_expo = 65 set rates_type = ACTUAL set quickrates_rc_expo = OFF set roll_rc_rate = 7 set pitch_rc_rate = 7 set yaw_rc_rate = 7 set roll_expo = 13 set pitch_expo = 13 set yaw_expo = 13 set roll_srate = 67 set pitch_srate = 67 set yaw_srate = 65 set throttle_limit_type = OFF set throttle_limit_percent = 100 set roll_rate_limit = 1998 set pitch_rate_limit = 1998 set yaw_rate_limit = 1998 set roll_level_expo = 0 set pitch_level_expo = 0 # end the command batch batch end #

[@ccampoverde]

Hola, en ese vuelo de prueba de casi 6 minutos que capacidad de bateria utilizaste?

[@DronesYjuguetes]

Creo que 1300 black serie cnhl, era un vuelo tranquilo

[@fernanfer_21]

Que batería has usado?

[@DronesYjuguetes]

1300 cnhl negra

[@BriiandMdz]

Con que le das mas color a los videos?

[@DronesYjuguetes]

Utilizó adobe premier o davinci