Sportster Chopper parts don't fit!!!

WEBSITE - HTTPS://WWW.THEEAZYCO.COM
MERCH INSTAGRAM-TIK TOK-PATREON - HTTPS://WWW.LINKTREE.C...
THROTTLE ADDICTION - HTTPS://WWW.THROTTLEAD...
PATREON - / theeazyco
We are finally starting to put together another evo sportster. When push comes to shove we find out some of the parts don’t fit right.
ROLLING DEATH MAUI - HTTP://WWW.ROLLINGDEAT...
SAVE%15 PROMO CODE : EAZY15
WE LOVE OPENING YOUR PACKAGES
SEND TO:
The Eazy Company
7 Jackson St.
Worcester, MA 01608

[@kct9967]

Rule of thumb: if it says 'custom fit', it means that you have to customize it to make it fit, if it says 'universal fit', it mean that it won't fit anything in the universe.

[@frnktdmn1937]

Then there is interference fit

[@excessivefarce2808]

@@frnktdmn1937 that only kind of fits

[@cornerstonemfg]

When something doesn’t work, it typically ends in a “hissy fit”

[@Jack-wi5qr]

In the early 90s I bought a hard tail for my’75 Sporty that fit very well,little grinding and cutting using the directions that came with it. Bought another for a’72 Sporty years later and it was a nightmare to work with. I eventually trashed it and used only the axle plates when I built my own from DOM. I’ve scratch built hard tails for several friends and a few of my own that worked better than buying kits.

[@mongrel1799]

@@cornerstonemfg …or a “shit-fit”

[@t.s.racing]

If I may guys, next time, heat only the stud, then after you get it good and hot, spray it liberally with WD40. It should come out. The theory being the aluminum head will retain the heat from the stud, and the WD will act to cool and shrink the stud as well as being drawn into the threads. I learned this from Boat Racing Engines, on oil passage threaded pipe plugs. People would laugh when I heated the plug and not the block, but after rapidly cooling the plug, they just came right out with a 3/8 ratchet. T.S. RACING

[@TheEazyCo]

Thanks for the tip my man

[@MRTYREMULISHA]

Also if you heat the stud only and let it cool it expands and contracts breaking up the corrosion between the to surfaces, do it multiple time on really bad studs. Trick is to let it cool completely before trying to loosen it!

[@dereks8930]

Dude. 👍

[@thatsmrharley2u2]

The next addition to the merch line...The EazyOut.

[@Eric-fs3cc]

I've done that. What you really don't want to do is use one of those bolt extractors because when that breaks off flush in the stud it gets real fun.

[@ecrusch]

You guys got big balls trying to fit those parts with that fresh-beautiful paint. Those two gorgeous bikes sitting side by side definitely give you the "Custom Shop" look...

[@darrenpulleng2789]

Love the older dude,true legend. Loved the story about his old lady on bk of his hog. Chuffing hell,could of gone either way. Love that dude

[@richardrandolph1069]

"Nothing is easy in the Easy Company" - SGT. Rock

[@mariomanzano2031]

Paul rules we need more of his stories

[@thomaswright2048]

Heroes Get Remembered, Legends Never Die

[@fearsomename4517]

I love Sporty gas tanks they're iconic. My starter clutch went on my '99 FL Springer, waiting on the part to arrive. Gonna have to remove the oil tank. Forever two Wheels.

[@chickenfriedchoppers158]

Paul’s haircut looks great 👌

[@TheEazyCo]

😂

[@4evrane342]

all i could think about the entire video 😭

[@dogpaw775]

heard about it never seen it, 'the patience of saints'. on the upside , the knuck build is looking like the mutts nuts.

[@lowrider6446]

Team building exercise... brilliant!

[@doomerism1899]

Thursdays are good days. Pay day and new eazy co video

[@Tcup1982]

Gotta love working on bikes, yall got my kinda luck⚡️⚡️

[@brendanstraight9655]

600 views in 1hr a lot of people taking their morning dump watching this. 😂

[@brianwoodfill9663]

you guys look like bad ass experts one minute and look confused and detructive the next!! im a fan of your channel i just hope you guys keep it real as you have sofar!!!

[@petothecheeto1194]

My favorite channel boys. Always looking forward for new episodes. Just got my first bike, an evo chopper! And you guys really inspired me. Peace ✌🏻

[@bdiff]

TeamWork makes the Dream Work!!! 🤣

[@MRTYREMULISHA]

Bikes a looking goooooood !

[@tigermuskievibes7141]

6:35 harbor freight pick set goated

[@elarr8733]

Paul looking sharp in this one.

[@cricketbighazard1469]

Your fired bud. You didn't follow proto with the oil tank. Keep feathering it boys

[@ahlllexx]

Paul’s haircut 🔥

[@sphix4718]

Y’all be building some bangers. Love the work.

[@jimgrady7458]

@7:53 That was frickin' hilarious 🤣

[@Fabricator-X]

We do it nice because we do it MORE then twice

[@stevekolody6300]

I had a similar problem when I had to change exhaust bolts on my 2004 gmc pickup with the aluminum heads. the studs are prone to breakage. I had the same thing happen to me with the last stud. Every time I welded a nut on the broken stud it would break off. There was nothing left sticking out of the head. I called a friend who had fixed this problem before. He told me to hold a nut over the stud and crank up the welder all the way. I did this with my mig welder, concentrating the weld puddle on the inside of the nut. It worked. the excess heat from the welder must have heated up the threads enough to loosen the stud. Let me know how you make out. Steve.

[@walterfechter8080]

That Sportster frame will leave a lot of people guessing -- aftermarket frame OR highly modified stocker? John, that frame you slaved over is ACE -- A + ! That fork is just the right length. The gorgeous paint is mint (pun). It should run as good as it looks. Here's hoping you guys get that show Knuckle together and get out to Nevada with time to spare.

[@arthurleino]

What I learned working on Aircraft. Look twice, then drill! Good for universal parts too!

[@goldenboi273]

Y’all gotta pray to Hedwig harder next time bois jk lol always out here making us laugh! Keep the videos coming.

[@jasonadams5187]

Awesome video and awesome content can’t wait for the next video Thank’s

[@dirtbikekid]

Steve Jobs, call me.. 💀😂

[@vanillagorilla6542]

Bike looks killer, I like the color. Bummer bout the exhaust stud though. 👍🏻

[@mtollmaster3747]

That’s is the worst! I hate to think how many times I’ve had a bolt break off and had to retrieve it in 40 years of mechanical work… Never on a painted frame/installed motor though. Wow.

[@TerminalSoule]

"Father Daughter time" 🤣🤣🤣🤣

[@ZakkBoozell]

Cross thread, or torque to spec. Tight is tight.

[@williamvito1349]

Cool color……!!!

[@Popsplace42]

Murphy’s law strikes again!

[@garyjohnson4575]

I used to work at Hempstead Harley Long Island...aftermarket never fits! Even if branded Harley, holes always have to be extended...or drilled!!

[@michaelroche1987]

Great paint

[@yinyanglovebomb]

I’ve used heat and a stick of beeswax in the stuck bolt. It’ll melt and lubricate it. I did this after welding a bolt to the piece. It might help in this scenario. You can get em on amazon

[@hustle5150]

I know how you feel had a shock bolt break off in my swingarm 2 week ago. Two hour job turned into two days.

[@splatbabylon]

Now with 45% more PQ!!!

[@danielenriquez1192]

MAKE SOME EAZY CO HATS! Love yall. Stay weird!

[@scottme6615]

Balls , as always , nothing but nut!!!

[@joehartwell7353]

PQ looking sharp!

[@krogersucks45]

Just requires "minor" modifications

[@donitellorusso5425]

TGIT (thank god its thursday)

[@rodcruikshank5815]

KCT got it rite! ✌️🇳🇿🤟

[@dopesquatch]

I had the same thing happen on my 02 sporty and i also tried welding 2 times kept breaking the stud more and more... i just put a new gasket in and said fuck it... its a evo sporty the tuffest bike on the planet

[@chevelle-pi1bn]

👍

[@SmokeDirt]

Why does throttle addiction even keep a website up if 90% of their shit is out of stock.

[@unchained20000000]

Like and subscribe, 20k let's see this, The Easy Company builds bikes like Jesus.

[@SLEBZ666]

Potentially a noob question but.. On the turquoise bike, will you see much over the tank? Like riding position 'n that. I always wonder about bikes styled like that

[@sixpack634]

other that building my own, where is the best place to get a cool sissy bar for my 1976 XLCH? (soft tail)

[@feellnfroggy]

As little as I know about Harley, why didn’t you just pull the motor to begin with? Are they really that complicated?

[@Wootangtw]

Haha …like and subscribed … thanks guys..

[@Homemadebridge]

Love a sloppy chop!

[@mandyrichards5604]

What blue green paint is that it's fucking killer

[@garyjohnson4575]

Too much fender...hand me that saw!!

[@trevorallen9435]

What’s Paul’s story?

[@paulwood3867]

What's the ñame of the colour please fellas ?

[@mikeanthony9956]

What is that color ?

[@AngelHernandez-yx3bm]

Bro where that shirt from

[@AngelHernandez-yx3bm]

I’m tryna buy 💪

[@thespiritof76.]

Nobody knows how to use paint protection?

[@Rokonroller]

How many times can I subscribe? Maybe I can unsubscribe then subscribe??? Lol

[@I_am_archie]

Fuk ya use the impact! Good grief!

[@josemejia9349]

Steve Jobs died