Spot Hogg Fast Eddie Two Pin (Best Hunting/Target Sight)

Overall thoughts on the Spot Hogg Fast Eddie after one season hunting with it.

[@brandonmadill6130]

Good review, thanks!

[@everythingwild2409]

Brandon Madill thanks for the comment ! Glad you enjoyed

[@daniellooper8114]

Awesome video thank you so much.

[@everythingwild2409]

Thanks for the great comment Daniel ! Glad it was of use

[@AJRonan]

Good video. Helpful.

[@michaelbattle7477]

Looking to buy one for my new Hoyt Ventum33. Lots of great content and valuable information!

[@everythingwild2409]

Thanks for the kind words!

[@xDIK86x]

Nice vid! What is the bracket/mount you have for your quiver? I see you have a bracket for your quiver up higher on your bow instead of mounting quiver to site. Also saw you mentioned buying at Presleys. I live in IL and got my Hoyt PowerMax there. Great store!

[@everythingwild2409]

xDIK86x I appreciate it brother! That’s the hoyt 4 arrow carbon quiver that they make! It’s really nice, super light. It has two different mounting brackets for how far you want it from the bow but I have the close one on! Yeah man great store!

[@samburns4761]

We sound like we wanted the same requirements I'm hunting but also just love shooting the bow, I couldnt decide between Tommy hogg or Fast Eddie double pin or 3 pin. but after this video i think im going double pin.

[@everythingwild2409]

Sam Burns It was the perfect choice for me! I think you will really like it. Thanks for the comment if you have any other questions feel free to shoot them my way. Much love, Kyle

[@JeremiahBurroughs99]

Great video - question - it comes with 2 sight tapes (one green calibration tape and one red calibration tape) - which one do I use - assume my top green pin is my 20 yard pin so do I use the green tape (if s what is red tape for?) Thanks

[@everythingwild2409]

mine only came with one color of calibration tape, it had 5 different strips but they were all the same color.

[@johncox7563]

Could be second axis if hitting left or right

[@baileyhannah7172]

May be a dumb question but when sight in at 60 do you use top pin? On both the sight and on dial

[@everythingwild2409]

You use the top pin for sighting In both! The second pin is for after you select a sight tape and it just gives you a second point of reference. Hope that helps!

[@matthewkyle2534]

You can use either one. User choice.

[@peyton7391]

Great review! I have one question though, what's the advantage to two pins vs. one pin and why'd you pick two over one?

[@everythingwild2409]

Hey thanks for the comment! I choose the two pin because 90% of my hunting scenarios are shot between 20-40 yards. By having a 20 and 40 pin if a deer walks by at any yardage I can shoot it without dialing. The reason two pins over 3 is that my 20/30 yard pin are close enough it’s not necessary and clouds the sight picture. Great example of the deer I shot in my profile picture caught me off guard and I knew he was between 30-40 yards so I put the 40 yard pin on his heart and 12 ringed him. If I only had a one pin I would have had to adjust my sight to shoot and the situation didn’t allow for such movement

[@jimmywallhanger8402]

He literally told you in the video idiot

[@jonathan_guerrero]

@@everythingwild2409 hi there, So say your bottom pin is zeroed at 40, does it also serve as your floating pin? I honestly thought your floating pin could not be zeroed and instead whatever indicator on your slider is what distance you shoot at. Sorry I'm new at this. Also, say you use the bottom pin to set your tape, which indicator do you use to shoot at say 80 yards?

[@everythingwild2409]

@@jonathan_guerrero hello! Your bottom pin doesn’t get sighted In per say, your top pin gets sighted in at whatever distance you want, mine is 25 yards, that is the pin you base your sight tape on. The bottom pin is whatever it lands on, the faster the bow the bigger the will land. For example my bow is 25 top pin and my bottom pin ends up being like 38 yards. If I put the same sight on my wife’s bow and sighted the top pin at 25 her bottom pin would be like 30ish because her arrow droppes faster than mine.

[@TwinTurboRamAir]

Talking hunting only, I already have an 20 yard pin. What's the difference between this $300 site and if I just add a 40 yard pin to my current $50 sight? Thanks

[@everythingwild2409]

Nothing significant, the advantages would be a less cluttered viewing window through the sight housing but in a strictly hunting scenario it’s not an issue. Attempting to shoot at 60 plus yards on targets it does. Hope this helps!

[@kevinrummel4676]

So moving that bracket to the bottom on the vertical slide in the beginning will give you max arrow clearance?

[@everythingwild2409]

In theory, as long as everything else on your bow is ship shape you should be ready to sling it!

[@kevinrummel4676]

@@everythingwild2409 ok I’ve had the sight in the middle position and can only get to about 70 yds with my bottom pin before the fletching was close to hitting the bottom of the sight. Thanks man

[@kevinrummel4676]

@@everythingwild2409 that did the truck for arrow clearance man thanks

[@everythingwild2409]

@Kevin Rummel glad to hear that helped, thanks for watching !

[@mattmoore5701]

So I'm sighting in my 60yd im hitting right by like 2in. So which way do I turn the horizontal micro adjustment knob?? Forward or Backwards

[@everythingwild2409]

how was your left and right at 20 yards? If it was perfect I would look to why your not hitting consistently at 60 as well. Not 100% which direction to turn it without my bow with me but I would make a small adjustment and write down how many clicks you move it. If it gets worse take it back to where you had it, then turn it the other direction. I think it’s away from the string but I don’t remember 100%.

[@ddelph23outdoors]

Awesome looking bow man!! I shoot the RX-1 and I’m a big fan!!

[@everythingwild2409]

Thanks man I appreciate it! One of the nicest shooting bows I have had my hands on certainly.

[@s1esteve]

Did you ever put a lens in this? how did you do it?

[@everythingwild2409]

The face of the site is threaded and they sell one that works

[@eugenewoo2206]

How does your pins go that far down? My second pin maxes out at 60 and the sight is at the lowest like you mentioned?

[@everythingwild2409]

You need to make sure that your sight house is as low as it can go for 20 yards. For example my dial virtually will stop turning at 20 and all of my range of motion is beyond that? Does that make sense? If not I will try and explain further

[@eugenewoo2206]

My sight dial can go higher but would be too low of a shot at 20 yards, if you understand what I mean. I had to basically dial my sight to the middle to shoot 20 yds. How can I fix that?

[@everythingwild2409]

Eugene Woo at 5:19 you see that I have moved my sight housing down to the lowest two holes which will allow for maximum range of dialing. Check to see if your sight looks the same ! If it doesn’t I suggest moving it to match. Please continue to ask questions if this doesn’t correct the issue. If necessary I will find a way to exchange photos to ensure you are taken care of man!

[@eugenewoo2206]

Ya i appreciate it! But yes I have adjusted my sight so it is at the bottom two holes, but even then, it does not give the maximum range, thus, I have the same problem.

[@everythingwild2409]

@@eugenewoo2206 you may have to send me some pics of your set up ! My concern is that your bow has tuning issues, have you paper tested your bow recently? I see this happen with d loops not being in the correct location.

[@isaiahbaldonado7939]

Where did you purchase it? Everywhere I look is 100 dollars more

[@everythingwild2409]

www.presleysoutdoors.com/spott-hogg-fast-eddie-double-pin-rh-019-wrapped/ The picture shows the multi pin and they say out of stock but I’m sure if you call they can get you one ordered in! Let me know if there is any issues !

[@deermuscle2283]

What is your pin size ? If you use the sight light , do you use .10 . Pin size ?? Can you explain the sight light ?? Buyer anxiety too here big time !!!!!!

[@everythingwild2409]

.019 is the diameter of the fiber optic filament. The sight light come independent from the sight and simply threads into the top of the bow sight. The light itself is universal as it simply is adding light to the fibers. You don’t have to get a spot Hogg sight light others will work if you have a different one already. Once you have a sight light you just screw it in and your good to go! Most have a 1-5 level brightness adjustment for different lighting levels! I understand what your feeling I was the same way brother! But at the end of the day this thing is made extremely well and will last me honestly forever. If you have any more questions just ask man! I will help you in any way I can! Thanks for taking the time to check out the video!

[@pewpew_life]

I just ordered this sight and got it sight in but I can’t get to 100 yards before run into clearance with the arrow. I ran the bar all the way up and sight in at 20 yards. Any advice? I’m pulling 70lbs with 28 draw length.

[@everythingwild2409]

I would have to see the rest set up, it’s difficult to come up with a solution without seeing what you’re talking about.

[@91284rgo]

Why not the XL?

[@everythingwild2409]

Hey man! I honestly didn’t care to have the extra length of the sight bar, hunting is my primary use and having the sight stick out that much more seemed like it could be problematic of hunting in pop up tents, maybe I’m wrong but that’s why I went with the regular. Thanks for the question man!

[@91284rgo]

@@everythingwild2409 Makes sense, get what works best for you. Thank's for the response!

[@everythingwild2409]

Not a problem brother! Hope the video helped!

[@campbelljoshua724]

I have shot both the XL and the direct mount and like the direct mount more.

[@tjwoolsey478]

Rust? Isn’t it aluminum?

[@everythingwild2409]

The housing is aluminum fasteners are aren’t. If the threading of the fasteners gets a coating of rust the friction can cause the fasteners to get stuck in the riser.

[@someoneyouknow96]

3 pin is better. 20, 30, 40 infinity. Larger sight window too. 2 pin is less adjustable. That second pin not being adjustable is the killer on that sight.

[@everythingwild2409]

someone you know thanks for the comment, I didn’t like the 3 pin, my twenty and thirty are so close there’s no point of using it. When I tried it all it did was take up room in my sight house which I didn’t like. A 20- 38 yard the way I have it set is perfect. Never once have I thought I wish I had a thirty yard pin

[@drl453]

So 3 pin is really unnecessary? I’m about to buy one. Not sure what to go with. Is t s fast Eddie the lightest sight they make ?? I want the smallest frame they offer.

[@Akeela.4]

@@drl453 go with a single or double pin fast eddie.i had a 5 pin spot hogg grinder and i found my 40 yard pin (amber color) disappeared when I would put it on a target. Shooting at 50 and 60 yards became difficult as well because the other pins being in your sight picture. Once I switched to the fast eddie everything became more clear while shooting.

[@davidcfowler1286]

Do you recommend adjusting the horizontal bar like you did the vertical?

[@everythingwild2409]

Hey David, assuming that your bow has a proper tune on it there shouldn’t be any reason to make a major adjustment on the horizontal bar.

[@davidcfowler1286]

Thank you...great review! Merry Christmas!!!

[@everythingwild2409]

@@davidcfowler1286 thanks for the kind words, same to yourself and family!