Spray can paint job/transformation pt.2

[@d45594559]

let the paint cure and wet sand with 3000 grit and then compound and polish. You'll be amazed at the result. god bless brother.

[@synamot624]

yeah he laid that paint just needs a good polish

[@georgemaese9098]

How long would you consider letting it cure??

[@robwells5753]

@@georgemaese9098a couple years

[@binchen4316]

kzbin.info/www/bejne/l37OlXylZ8mIqKc a small paint filling machine with spray cans. very cheap and easy-operated

[@renegade9758]

@@robwells5753 you use the primer??

[@mpikas]

Just for anyone that likes the yellow and likes how this came out/covered a heads up- yellow is one of the worst hiding colors out there. To get it to look right you really need to spray over all one color, and white is the only one that works well. This was sort of the perfect situation painting a white car (you saw when he painted over the scuff it didn't cover), if you are starting with any other color you need to put down a white primer/sealer first.

[@beardedguardian71]

Cant believe how decent that turned out. Never in a million years would I have thought you could paint a car with rattle cans.

[@ldp1967]

Looks great

[@susanpidgeon9683]

You are a great teacher and gave me the confidence I needed to paint my van. Thanks! Car looks great! 🎉

[@stephendoriankutos4429]

Just an added tip, if you want to get really clean, sharp lines when taping off areas, put the tape down and then spray it down with the previous color to seal it perfectly. So in this instance, after spraying the yellow paint and then taping off the hood, spray yellow paint of the tape first and let dry to tacky, then spray the black paint. It seals the tape so absolutely no black paint creeps under the tape and creates imperfections in your lines.

[@jnicksnewstart]

If you ever decide to do this again, invest in a Rust-O-leum trigger handle. It will save your fingertips.

[@kennethturner7942]

For real! I got one before I even got started. I knew my precious, dainty little fingers couldnt handle that little white plastic tip of doom!

[@glenndodger1381]

YESS LMAO I tried doing mine by finger and said hell nah, threw the trigger handle on it went sooooo much smoother it really saves times and finger pain 😂

[@tombrewsaugh1399]

I have a trigger Handel I bought back around 1968 while I was still building model cars. Still use it but it is starting tinware out tends to slide sideways off the nozzle.

[@doobey77trill]

👍🏾

[@binchen4316]

kzbin.info/www/bejne/l37OlXylZ8mIqKc a small paint filling machine with spray cans. very cheap and easy-operated

[@ayeebmadedis7132]

For this to be an at home spray job I must say you did Excellent brotha. Great color and pattern scheme really couldn't go wrong..

[@adventuresofsven2314]

Awesome job.Didnt expect it to be so nice. Thank you for all the advice. Fantastic job.I will try to paint one ....hopefully i do an awesome job

[@qcrews9410]

Looks great!! Love the 2 tone and the vinyl!!

[@kennethturner7942]

That looks really good. Im doing my van in a few weeks (has to get cooler here in AZ). Good job man, and thanks for the video.

[@boydmerriman]

Yeah, that was a surprise! I was admiring your work when suddenly, without fanfare, your "surprise" popped up and I was impressed! Great Job!

[@patrickellis2626]

Hey man great video and thanks for the tip about warming up the cans before you use them. I wooda never thought of that. Everything turned out great, I'm inspired to paint my Dakota now.

[@rickycastro6028]

The best I've seen with spray paint looks good

[@calvinwinn9133]

Holy crap that looks great! Nice touch with the vinyl at the back too.

[@BKD414]

Wow looks great! Looking to paint my Charger and Yukon in the future so appreciate the tips

[@psyolent.]

dude that came out absolutely mint. top job mate.

[@thomasemerson7257]

Excellent tutorial, I learned a lot watching this. Thank you.

[@OTCLLC]

Dope motivated me to get started on my projects 💯💯🎨🎨🎨

[@TheExpertNoob]

I did my corolla the same exact way, two toned purple and green, it lasted for 2 years with no clear coat but chipping from incorrectly sanding, started popping up everywhere, I just repainted it in Sail Blue, rustoleum, very nice.

[@jfgaxeworks3447]

Nice work. I'll bet that buffed out really clean. Magnums are dope!

[@imright3074]

Thanks, it looks awesome. Great job.

[@richardworden9747]

Looks great . I used the same yellow on my icebear scooter over 4 years ago . And to this day looks good it will hold up to the sun.

[@rham4900]

That's a great job 👏. Really turned out great.

[@unkelartgarf3792]

Amazing results brother! Light colours are definitely the way to go with this type of single stage car painting. I tried painting a door on my ol' SLK and man, what a mess! Seriously. Ground it all back down and then painted the whole car in a nice light matt grey (but not one that look like primer!!). Came about about as good as your fine job here.

[@rolandlymangrover754]

Love this awesome job.

[@rodney4159]

Rub the headlights down with 800 wet paper then paint them wity clear lacquer, will look like new

[@smokinmetalcarfun2292]

They did a great job on that paint job. Two-tone my silver Magnum to already started on some of it I just got to paint the Hellcat Hood first do I start on the side for the car. keep killing it bro💪💪💪💪💯💯💯💯

[@idelgado2101able]

That’s amazing! Great job

[@rickieparker2202]

You did good man. I been doing the same, each car gets better. I'm on my 3rd car, it took me a while to find the right paint. You inspire me. You get better every car you do. I have a 08 Mazda 6, I painted hood on a Toyota Camry. Then a fender on another Camery. 1 QT, clear, and all you need to paint hood, I was told would cost me 358.00, plus tape paper.

[@patrickwagon3906]

Warming up the paint is a pretty banging tip I haven't seen anywhere else. Great vid, bro. Weirdly, you did the same color scheme I'm planning. I know this video's a bit old, but if you're still around, how'd it hold up?

[@Emilthehun]

Daaanggg bro that came out really nice! I had a Yellow charger rt , but always had a soft spot for these magnums! Black out the wheels and your good

[@mrdiycarcustoms]

Thanks bro I appreciate it, and yea we blacking them out and painting the brakes to. New video coming soon on that, thanks for watching bro

[@Emilthehun]

@@mrdiycarcustoms you got your self a new sub! Can't wait to see it get done up! Oh and I love the water on the floor idea. I never thouof that before

[@michaelwilliams2232]

Turned out Kool ! Like The Rumble Bee On The Back !!

[@mrdiycarcustoms]

I appreciate it and thanks for watching

[@d45594559]

GOOD JOB BROTHER..IT CAME OUT NICE.

[@lostchill1251]

Can’t wait to paint mine 🔥🔥🔥

[@nobletruthshealingandascen183]

Good tip with the warm water for the cans! Super helpful

[@50chevtrk1]

Looks good. Great job man.

[@drewclinton4304]

good job man, that looks awesome wayyyyy better than i thought. so any clear coat?????? and did u ever try rustoleum 2x???

[@864doorcutty]

👍🏾👍🏾Man you cold 🥶 wit the cans 👏👏

[@mrdiycarcustoms]

I appreciate it bro, and thanks for watching 💯✌🏾

[@anthonyshurburn7560]

You did a great job. The car looks beautiful.

[@joshualymer6568]

Looks great love it hard work always wins

[@mrdiycarcustoms]

I appreciate it and thanks for watching

[@georgemaese9098]

Goodjob!! That's shits dope ima use this video to do my ram!!

[@MojoNoJojo]

That jont goes crazy! I can’t wait to do mine.

[@mrdiycarcustoms]

I appreciate it, and good luck when you do yours. Thanks for watching

[@SteveDavisCarGuy]

This process shock me every time good job 👌🏾

[@mrdiycarcustoms]

I appreciate it bro thanks for watching, I’ve been off KZbin for a few months, but I see you still doing yo thang. Keep it up bro 👍🏾✌🏾

[@SteveDavisCarGuy]

Mr DIY Car Customs haven’t been uploading myself. Busy doing other stuff

[@freebuilder007]

That came out really good....Crazy good.... I Like the warm water tip....Thanks.... I got peeling clear coat- 15 year old Cherokee.... My idea is to sand the whole car and rattle can it in a color that is very close... Any tips on how many cans ( 8 oz. duplicolor perfect match spray cans) I should get? I'm surprised you got a whole side out of one can,,,,,

[@AlanT1010]

hell of a job man well done!!

[@mikejessup9304]

Looks great Man!

[@UndergroundPaintKing]

nice work bro the magnum looks good!

[@williamwest8924]

Dang !!!That looks good.

[@Emmanuel-hn3gg]

Ufffff 😬💪💪👍👌 very good broouu.

[@norbelsemaj3870]

Came out great

[@bowtiechevyboi3864]

You snapped bro. God has blessed you with some awesome talent.

[@mrdiycarcustoms]

Thanks bro I appreciate it, and thanks for watching.

[@trentdawg2832]

Turnt out sweeeeet

[@ronkemp9528]

Looks great.

[@FlytRiskMajeTooHunid]

You did that Bru!! I got a Magnum but I ain’t gonna paint it myself 😂 💯💯

[@mathewszymanski7905]

AWESOME JOB

[@donaldbaker6961]

Awsome Job 👍

[@funnymoney6969]

Add some spray max 2k clear that thing would really shine! Nice job. I love it

[@mrdiycarcustoms]

Thanks, it’s my brothers car and he was cool with how it came out and didn’t want clear on it. But check out my paint job I did on my cutlass, I used 2k on that one. Thanks for watching ✌🏾

[@binchen4316]

kzbin.info/www/bejne/l37OlXylZ8mIqKc a small paint filling machine with spray cans. very cheap and easy-operated

[@brandonhellmer899]

Good job man. I'm definitely impressed

[@beejaythedeejay5100]

That's Butter Baby nice job Keep Up the Great Work 👀👌☝✌💪💫💥YEAHHHH$%$

[@peteredwards9147]

Good job, looks really good

[@chrishernandez2490]

Looks dope 👌!!

[@johnnycall7589]

Nice paint job man. I like it alot.

[@raffy1us]

Awesome bro. Keep up the vids.

[@jeramelawson5644]

Nice job looks great

[@kevins4785]

awesome paintjob keep it up

[@moneybanks82]

Real nice work keep it up I like what you doing

[@mrdiycarcustoms]

I appreciate it and thanks for watching

[@kurtmiller2254]

Looks good man got a couple of questions though did you end up color sanding and buffing the car if so what did you use and without clear coating the car how long will that paint last

[@Eastsidee817]

Same q

[@JDOrtiz-qt8zm]

Nice job and great tips

[@darrenzirkle2351]

Looks really good 👍👍

[@carlindalewis9792]

That was an awesome job

[@telvinchapple8295]

Im gonna do a matt black for my chevy. Thanks for the tips

[@integraonabudget958]

Came out cool bro I’m gonna try too but with ford grabber blue on a import 👍🏼

[@iamnotu79]

Looks good man!

[@Copman-sv2kh]

Damn bro that one hell of a good job looking forward to seeing more

[@mrdiycarcustoms]

I appreciate it and I have a new video dropping in 2 days on this magnum. Thanks for watching bro!

[@Copman-sv2kh]

@@mrdiycarcustoms looking forward to it

[@izellconley5469]

Im about paint my fird f150 with cans... Nice job fami3

[@Theromanticrejeck]

for the roof you should have tried the rustoleum turbo, it has a bigger spray pattern for better coverage.

[@Theromanticrejeck]

came out great though

[@BigredGT-pm5lm]

Looks really good for first time 👍👍👍👍

[@simeonhendrix]

Killer man! 12 yellow cans and 4 black cans, nice!! How does the paint last with no clear?

[@Eastsidee817]

Same q

[@n8thanspeed]

yeah man you nailed it bro!

[@chevyboi600]

Came out really decent for the price. Especially if you don’t wanna shell out 3k for a car that’s gonna be enjoyed and not a trailer queen for a car show. I salute 💯💪🏽

[@jennyparham8626]

Cool job!! Way to save money!!

[@darrenwinstanley4163]

nice job,looks good ..

[@34.FB.34]

Hi from France, i would say one word : '' wow! ''

[@two-edged777]

Man, that looks very sweeet...niice job

[@chefzackkasmar6767]

Nice job dude!

[@treerat6959]

Damn that's nice , did you wet sand and polish this yet or is that just a spray finish?.

[@gergemall]

Super cool

[@thill9k]

Nice job my man!

[@humphreynii4133]

Nice one bro, I get 2005 magnum I will the yellow and black like yours I love the two tone color

[@humphreynii4133]

👍👍👍👍👍🙏🙏🙏🙏🙏🙏

[@bearkamakana8487]

That's Beautiful 👍👍👍👍

[@mrdiycarcustoms]

bear kamakana I appreciate it and thanks for watching

[@justcallmetip2115]

Yesss!! I love it! Looks good for $5 paint cans. I'm going to be painting my car soon. Did this car have any rust? My car has a little around the back bumper. Any idea on what to do with that?

[@binchen4316]

kzbin.info/www/bejne/l37OlXylZ8mIqKc a small paint filling machine with spray cans. very cheap and easy-operated

[@tombrewsaugh1399]

Damn good job for spray cans. Shure like to see what you would do with a good spray gun. If you haven't see them yet Rust -O-Leum is making a turbo can 24 oz with a 10" spray pattern. Only in black, white , and gray right now.

[@binchen4316]

kzbin.info/www/bejne/l37OlXylZ8mIqKc a small paint filling machine with spray cans. very cheap and easy-operated

[@Joshdifferent]

Looks nice bro

[@613realist]

Awesome work bro 😎🙏🏼

[@randallmeisner4610]

Nice job

[@Leatherkid01]

That turned out great....did u wet san after it was dry...the shine is excellent....factory finish level budget paint job 😏

[@randabuffer6562]

Definitely looks good and I paint cars 😁

[@blevins6584mopar]

First good job . Wet sand ... buff ... and one last suggestion bring that stripe all the way down bumper. Good luck. 😉

[@Wiseman189]

Yo bro no joke that thang came out nice, new subscriber here

[@mrdiycarcustoms]

I appreciate it bro and thanks for the support

[@northerngrit9656]

I'm doing the exact same colors with the exact same paint on my car, the black is working great but the yellow has spots where it wrinkles up as it dries. Yours looks better than mine though.

[@klizzyykicks1712]

That mean u spraying too heavy and make sure u spray 4-5 inches away from the car for even coverage

[@rodney4159]

Its reacting with paint underneath, thats why it wrinkles