How to make a water level monitoring system with ESP32 board and Blynk

[@kylacharissevaldez1472]

I don't get it, what wifi should you put in your code??? Wifi from phone hotspot ??

[@NareshKumar-yc4em]

Will you help me completing this project?

[@kotipallivenkat2557]

Can u explain the connections that you have given exactly at 6:34

[@nurnajwaasyilahhelmi4952]

Hi...have you figure where the end of the connection connected with? Im kind of confuse since the alligator clip did not show it connected with what after

[@MangeshKumar-h3w]

Sir, which device did you use for power supply(battery, adaptor) woh bhi kitne voltage ka

[@MeghaJakoji]

How we connecting the buzzer

[@M.GanapathiGanapathi-by6gx]

Bro esp 32 adapter website la amount kattala pro vera web solluga

[@keerthu374]

Only my motor works when connected to lap Sensors Lcd is not working Also battery not working

[@Wawan_Setiaw4n_Robotik]

I always follow every video project and test the results, amazingly very useful. Always success, keep the spirit of being creative and sharing knowledge, may God repay this kindness...

[@NareshKumar-yc4em]

Yes sharing knowledge is really great

[@nurnajwaasyilahhelmi4952]

Hi...have you done this project? If yes...may i know the alligator clip at 6:34 will be connected with what?

[@putrioktaandini1730]

Iya kak apa kk sudah tau terhubung ke apa ya??​@@nurnajwaasyilahhelmi4952

[@nurnajwaasyilahhelmi4952]

@@putrioktaandini1730 sorry but no. But i figured maybe it connected with the battery holder and maybe the wire of the water pump, but yeah im not sure. So sorry if its wrong

[@MXJaguh]

@@nurnajwaasyilahhelmi4952 hallo kak mau tanya itu wayar terhubungnya ke mana..mohon bantuan kak

[@M.GanapathiGanapathi-by6gx]

Pro nenga sonna website la order eppadi pannura

[@umairyaqoob-r1p]

Automatic on or off of the pump and trunk monitoring, this is a project, or two, your video is related to my project, your video is only on tank monitoring, smart water management system, iot based tank monitoring and pump automation, make a guide line video on this project. thanks

[@harmeetkaur9845]

How to use without adapter ??

[@0124akash]

Sir, can I get deta when wifi (incase) is not available ?

[@Spiritual_mk]

My LCD display on but blinking and also I2C module Reb bulb is blinking,what is problem(Power Supply) Please reply me sir

[@FORSTEVENSOCMED]

is it possible to make this automatic and can set a time?

[@kylajoytrompeta3103]

is it okay if there is no clip( idk what do you call thet sorry) that connect the battery and pump?

[@sritu_hobby]

Please use a 9v battery

[@nurnajwaasyilahhelmi4952]

Hi..have you done this project without the clip? Is it still working? Since im doing this project as my final project for this semester

[@nurnajwaasyilahhelmi4952]

​@@sritu_hobby for the battery..what volt is the battery that you use? Is it 1.5v? Or 9v?

[@kylacharissevaldez1472]

If we use 9v, how can we connect the water pump to it??😊

[@kylacharissevaldez1472]

hello, what is the clip connected to??😊

[@babadanicarose2825]

Why there are 2 errors

[@WawanSetiawan_82]

Good, tank's very much master..

[@sritu_hobby]

Thank you too

[@kylacharissevaldez1472]

What is the alligator wires connected to??

[@sritu_hobby]

Power supply

[@omkarkulkarni1489]

He connected the GND & VCC of the adapter through an alligator clip to create a direct path between the power supply (Short Circuit).

[@krishnasonwane4989]

Device not online for blynk

[@riskkkkk]

why when motor is on, the lcd cannot display output please explain it..

[@sritu_hobby]

Check jumper wires

[@D4JTD_MRafiFabian]

what will happen if i don't use that esp32 adapter?

[@sritu_hobby]

You can make this project without adapter

[@kylacharissevaldez1472]

how??

[@haidersaleem3066]

Bro you are using esp32 in hardware but in code esp8266 is present? Can you please explain this

[@nupmee9112]

🔥

[@keerthu374]

my lcd is not displaying why and its new

[@sritu_hobby]

Check jumper wires

[@keerthu374]

​@@sritu_hobbylcd and i2c integrated components are not working for my friends also

[@Raghul-rt6vq]

Bro where do you get code I want code for a different project plz say bro

[@pavann9099]

Sir can you help me out with this project? It is my college project, Please do help me out sir. My esp32 not connecting to wifi sir It is showing offline sir always

[@techwithathul]

Bro i cant compile the code can you help me😢

[@faliqhanifa9716]

panic: runtime error: invalid memory address or nil pointer dereference [signal 0xc0000005 code=0x0 addr=0x0 pc=0x7855fb] can you help me with this error message?

[@M.GanapathiGanapathi-by6gx]

Nodemcu eps8266 ila veraya

[@kiranmajhi-vq3tw]

Bro please share the program file

[@sritu_hobby]

Description

[@Namupatil123]

I want to code plz can you send i can give money for this code

[@sritu_hobby]

Link in the description

[@Pvaishnavi3006]

where is the code????

[@sritu_hobby]

Description

[@talha9276]

How to get wifi name and password?

[@sritu_hobby]

Please visit basic tutorials

[@talha9276]

which one in basic tutorials playlist @@sritu_hobby

[@kiranmajhi-vq3tw]

copy error messages compilation error: LiquidCrystal_I2C.h: No such file or directory problem solve kense karen

[@sritu_hobby]

Include the I2C library