does the spring have to be that strong ? I wonder if one would change the spring with a lighter one to make it more quiet and easier to pull....
@s1sriggs2 жыл бұрын
You could replace the spring, but you have to take the power v distance etc into consideration. A lighter spring could reduce the performance.
@呵呵-y5n2 жыл бұрын
Hello, how many times can a bottle of CO2 be activated? Can you adjust the initial velocity?
@s1sriggs2 жыл бұрын
small co2 bulbs allow about 20 ish shots. you adjust the power with the regulator.
@pascalpellinger2396 ай бұрын
Hey your Video was great for me ! One question - i cant screw the front screw from the triggerbox all the way down?! Othetways the cylinder scratches and stuck. Do you know why? If i let the screw out everything works perfekt..
@s1sriggs6 ай бұрын
Hey @pascelpellinger239 The screw is very specific to that slot. Be careful you haven't mixed it up with another one. If it scratches on screwing it in then i would double check.
@skr333t54 жыл бұрын
Alright mate, wanted to say great work on the video. Very informative, just what we need!! Wish this was out when I modded my rifle, would have made it so much easier! May I ask, does your rifle leak gas when there is no BB racked and ready to fire? Or any leak issues at all? I know there is leakage when racking the bolt but only a little bit. Thanks in advance. And thanks again for the great tutorial!
@s1sriggs4 жыл бұрын
Hey Skr333t, before the fixed air seal it would leak under pressure no matter what. When the seal was fixed it was sealed completely both cocked and safe.
@skr333t54 жыл бұрын
@@s1sriggs Thanks for your speedy reply. The air seal in question - is that the one you mention you put tape on and re-greased?
@s1sriggs4 жыл бұрын
@@skr333t5 Sorry for the late reply, been rather busy. The seal that failed is on the front of the cylinder. It just pushes on. The issue is when i used the ptfe tape i think it didn't have the same sealing effect due to the grease. in the end, the only real way would be to either replace the seal or them send a new part. That's what they ended up doing.
@lukaezekiel92933 жыл бұрын
i know im randomly asking but does anyone know of a tool to log back into an Instagram account? I stupidly forgot my login password. I would love any tricks you can offer me.
@gatlinthatcher76513 жыл бұрын
@Luka Ezekiel instablaster =)
@slifer9672 жыл бұрын
Does that spring need to stay in there because i've seen a few snipers that have hpa kits that have no resistance on pull at all.
@s1sriggs2 жыл бұрын
@slifer967 hi, it is part of the kit. I always fitted it as it allows the gun to spring the cylinder back.
@JBAIRSOFTIRELAND3 жыл бұрын
What trigger do you have in ssg Is it 45 or 90 I'm looking to get the kit for well mbo3 I'm not sure on trigger if I order standard vsr10. What shop did you order from?
@s1sriggs3 жыл бұрын
JB, Im using the CNC'd trigger unit on the 24. www.skirmshop.co.uk/springer-custom-works-s-trigger-ssg-24-mod-24.html
@Robin_Hood252 жыл бұрын
Think this would work with a full thrust kit?
@s1sriggs2 жыл бұрын
@erictaylor4597 To be honest i don't think so as the piston is different i think.
@vytautas25212 жыл бұрын
can you show foto where u drilled on body for hose?
@s1sriggs2 жыл бұрын
Vytautas, i didn't need to drill a hole. I put it into a pouch on the stock.
@vytautas25212 жыл бұрын
@@s1sriggs so where hose was going from triger box?
@s1sriggs2 жыл бұрын
@@vytautas2521 From the trigger i fastened it outside then into the pouch. As i had so many issues with it i didn't bother to tidy it up as i never used it on a site. I only tested it to make sure it worked.
@demonbabe21062 жыл бұрын
Would this work with a ssg10a1?
@s1sriggs2 жыл бұрын
Sorry Demon, it's only for the ssg24. The A1 is based on the vsr
@sergerobertmurhamer96012 жыл бұрын
Great one thx for the Video!
@s1sriggs2 жыл бұрын
No problem Serge
@chiefairsoft82774 жыл бұрын
I really enjoyed your video. I have an ssg24 myself, which kit did you use. I can't find it on mancraft's site.
@s1sriggs4 жыл бұрын
Hey gmcret 142 i used the kit from www.skirmshop.co.uk/tags/mancraft-ssg24/
@mamedasc84714 жыл бұрын
please make a video how it shoots, how far? and how many shots is enough for an average airhead
@s1sriggs4 жыл бұрын
Hey Mamed, i would love to however ive had to order more seals as its leaking.
@aprilhamlincom184 жыл бұрын
Any updates? Interested here, too ...
@s1sriggs4 жыл бұрын
@@aprilhamlincom18 Hey i did get a new front seal and it was much better, however with the co2 bulbs being a pain in the arse with consistency etc i put the rifle back to its original configuration.
@christopherjohnvilan21083 жыл бұрын
@@s1sriggs hi do you have any updates on this?
@s1sriggs3 жыл бұрын
@@christopherjohnvilan2108 They sent out a new seal. This fixed the problem. The issue i had after that is the consistency of the Co2 bulbs, so i set it all back to the original config.
@maca5574 жыл бұрын
is it possible to use this kit on SW24 or not ?
@s1sriggs4 жыл бұрын
On the SSG24? Yes. I would go HPA though and not use Co2.
@tripphill63 Жыл бұрын
do you have a link to the regulator you used
@s1sriggs Жыл бұрын
Apologies but it seems the reg is no longer on the site.