Stabiliser Leg Correct Use & Maintenance - MDC Masterclass #02

MDC Masterclass #02 - Stabiliser Leg Correct Use & Maintenance
MDC MASTERCLASS is a Series of Short Informational Videos, How To's, Tips and Tricks for using MDC Camper Trailers and Offroad Hybrid Caravans.
Please leave any question as comment below. We will try to make more masterclass of it!
Subscribe for more videos: / marketdirectcampers
Visit our Website: www.marketdirect.com.au
Like on Facebook: / marketdirectcampers
Follow on Instagram: / mdc_camper_trailers
#masterclass #caravan #camper #MDC #tutorial #tip #camping
*Specifications may change in subsequent production models. Please check current specifications with your salesperson.

[@mahargllehctim]

Thanks for the info on use I’m a relative newbie and my caravan supplier told me the should always be at the angle for a wider support base...... Glad I watched and will probably get a much longer service life from my steadies as a result of the informed tutorial with descriptive reasons why. Cheers

[@user-hf1mi6xt9y]

That was great demo. I did come a cross some other issue with the legs, it was a bit stiff. I took it apart and found out the bearing inside the leg was very rusty and only 3 to 4 bearings left. I bought couple and replaced the faulty and the other one too, put a lot of grease, now seems like brand new. But thanks a gain for your good demo, was very informative.

[@cameronstirling3843]

Why are they designed so fragile when they could be made similar to joky wheels and hold much more weight. Just broke the pin on a Jackson just simply by rolling it down to the floor must have been fatigued already.

[@michaelmight8378]

Do you need to remove the stabilizer leg for maintenance or can you grease without removing the leg?

[@businessguide8850]

You can grease without removing the leg